Summary of the content on the page No. 1
QSC13212D
Hi-Resolution CCD Color Camera
With 2.8 to 12MM Varifocal Lens
And Built-in On Screen Display
OPERATION MANUAL
Product Manual
Summary of the content on the page No. 2
Thank you for purchasing our products. Please read the manual carefully before using and keep it for future reference. W A R N I N G To reduce the danger of electric shock, and avoid lightning strikes, do not tamper with the wiring or connections to the camera’s circuit board, and make sure the unit is properly grounded. Unit should only be serviced by authorized repairmen. Contact Q-See for any needed repairs. Other Precautions: ☆ Please make sure the powe
Summary of the content on the page No. 3
Notes 1. Avoid strong impact and stay away from strong electromagnetic interference and vibration. 2. There are some sophisticated parts inside the camera, therefore, during transportation and installation, please avoid damage caused by stress or severe vibration. For the sake of safety, please do not switch on power before completing all installation. 3. Please comply with all electrical safety standards during operation, camera or signal transmission cable should maintain a suf
Summary of the content on the page No. 4
Directory 1. Features ·································································································· 1 2. Dimensions and Accessories ······························································ 2 3. Installation ················································································· 3 4. Circuit Board Layout ········································································10 5. OSD (On Screen Display) Operation ························
Summary of the content on the page No. 5
1. Features 1. New Generation SONY CCD Adopting the latest Second-generation high-sensitive CCD, it can receive clear and lucid images even with very low illumination. 2. Hi-resolution Video Resolution Color horizontal resolution can reach 550TVL, B/W horizontal resolution can reach 600TVL. 3. Day & Night Switch Day & Night cameras can switch automatically into color or B/W according to available light. 4. Digital Wide Dynamic Technology Built-in special digital wide dynamic t
Summary of the content on the page No. 6
2. Dimensions and Accessories Dome Camera Dome Camera 2.2 Accessories Item Accessories Quantity Remark 1 Product Manual 1 PC Standard 2 Customer Info Card 1 PC Standard 3 Fixed Screws 1 Set Dome Camera 2
Summary of the content on the page No. 7
3. Installation 1. Release screws to open the cover 2. Use the pictured tool to take off the screws 3
Summary of the content on the page No. 8
3. Open the cover 4. Arrows point to the 3 holes for ceiling mount screws 4
Summary of the content on the page No. 9
5. Mounting the base to ceiling 6. Screws for changing the angle of the lens 5
Summary of the content on the page No. 10
7. Loosen the screws on both sides with a screwdriver 8. Twist the top to change the left/right angle of the lens 6
Summary of the content on the page No. 11
9. Top screw adjusts focus, bottom screw adjusts lens size. 10. Cover of cable pull out hole 7
Summary of the content on the page No. 12
11. You can remove the cover with a coin 12. Pull cable through the hole 8
Summary of the content on the page No. 13
13. Place cable in channel and through side hole 14. Cable through the hole 9
Summary of the content on the page No. 14
15. Connector for portable video tester if needed by the installer, the black button is for operating OSD (On Screen Display). 4. Circuit Board Layout QSC13212D Dome Camera Circuit Board 10
Summary of the content on the page No. 15
4.2 On Screen Display Switch ENTER Press to Enter or Exit the menu UP/DOWN Tilt toward UP and DOWN to move up and down in menu Tilt toward LEFT, RIGHT for modifying the menu parameters ， LEFT/RIGHT press RIGHT to move to the next menu and modify the parameter. 5. OSD (On Screen Display) Operation Press the "OK" to enter main menu, if the button is not pressed for 90 seconds, the main menu will disappear automatically from the screen.
Summary of the content on the page No. 16
5.1 Exposure When the cursor stops on "exposure", press “Ok” button to enter "exposure" to set the parameters. Lens There are two kinds of options, automatic or manual; depending on the specific type of the lens. Lens Brightness User can adjust image brightness from 0 to 100, depending on the lightness of surroundings. The default value is 35. Electronic Shutter Electronic shutter is to set the camera shutter speed, that is, the video output per second (1 / 50
Summary of the content on the page No. 17
5.2 Color Move the cursor to "RGB" icon, click "OK" to enter the White Balance menu to set relevant parameters. White Balance This is used to restore the authenticity of the color, affected by the change of color temperature. Users can choose white balance mode according to the actual situation: Auto White Balance / Auto-tracking White Balance / Lock White Balance / Manual White Balance respectively. Manual - Red Manual white balance can be adjusted, the default val
Summary of the content on the page No. 18
5.3 Day & Night Switch Day & Night Switch is specially designed for different occasions. There are four kinds of modes as follows: automatic mode, color mode, B/W mode, and external switch. The user can set different modes according to the surroundings. Color Signal Set menu to display color or not Color to B/W Settings When the mode is "external control", user can’t adjust it. This is color to B/W accumulated light intensity, when it reaches “alternating
Summary of the content on the page No. 19
CDS Control The filter switch will be controlled by the photocell, and it can work only in external control mode. 5.4 Function Mirror Left or Right Mirror can be set when turning on the mirror switch. Sharpness adjustment Adjust the image sharpness from 0-50. Peripheral Brightness Compensation If you need to compensate brightness, set switch to ON and move the cursor down to "Peripheral Brightness Compensation" and adjust the value from"0-50". Str
Summary of the content on the page No. 20
Wide Dynamic Compensation This is digital wide dynamic function, you can adjust its value in order to achieve the best results, the values are: 60DB, 80DB, 100DB. 5.5 Motion Detection (This camera does not have this feature) Mainly used for setting the image motion detection and alarm linkage function. 5.6 Privacy Zone "Privacy Zone" is mainly used for special places or special surroundings, for this camera there are four zones set for privacy
