Q-See - Digital Peripheral SolutionsQSTD501616C user manual

Summary of the content on the page No. 1

Quick Start Guide
16 Channel DVR
DVR Setup
Model: QSTD501616C

Connect Setup Enjoy
1 2 3
What’s in the box? Whatís in the box? check that your package includes the following:

DVR
.
Manual USB Mouse
RCA-BNC x2
500 GB Hard Drive
Ethernet Cable
Remote Control
QPSCDCA Power Supply x4
60 ft. Camera Cables
with Audio x4
Power Supply
Cameras x4 - QD28414
& 8 Way Adapter
for QD28414
x4 - QD28414W
60 ft. Camera Cables x12
Digital Peripheral Solutions, Inc.
8015 East Crystal Drive,
Anaheim,

Summary of the content on the page No. 2

Connect 1 1 CONNECTING CAMERAS: QD28414W & QD28414 A Connect the 60 ft. extension cable to the camera DVR and Cameras B Connect the female power end of the cable to the splitter C Connect the 8 way splitter to the AC adapter D Connect the video end to the video port on the DVR Repeat the same process for cameras 2 through 8 FRONT VIEW 1 2 3 4 5 6 7 8 1 Yellow: Video Out Black: Power In X8 A D 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 1 HEAT RELEASE VENT 9 POWER 17 SEARCH 2 HDD LOCK 10 HDD S

Summary of the content on the page No. 3

4 3 CONNECTING TO A TV OR VGA MONITOR CONNECTING CAMERAS: QPSCDCA A Connect the video and power connectors from the cable to the camera Connect to a TV: B Connect the other video connector on the other end to the Video In port on the DVR A Plug the BNC to RCA adapter to the Video Out port on the DVR and then connect a RCA C Connect the power connector on the other end of the cable to the power adapter cable (not included) to the adapter D Attach the power adapter to a power source B Connect the

Summary of the content on the page No. 4

B Setting up the DVR to Record: This system offers four modes for recording: 1) Manual, 2) Schedule, 3) Motion Detection, and 4) External Sensor. Setup 2 For setup of external sensor alarms refer to sections 2.3.2 and 3.3.5 of the user’s manual. To navigate through the DVR menu, three options are available: 1. DVR Front Panel: Use the DIRECTION keys to move the cursor and the ENTER key to select 2. Remote Control B1 B2 3. USB Mouse (included) A Accessing the DVR menus A1 Press the MENU

Summary of the content on the page No. 5

C Setting up the DVR to Playback Files C1 C2 B5 Display the SYSTEM screen (B5) and select the MOTION option (GREEN box). Press the SEARCH key on the DVR, enter User Id and Password if the system is password protected. The SEARCH option will display (C1). Select Time Search (C1 RED box) and press the ENTER key. B6 C4 C3 Push ENTER to put a check mark in the enable option (BLUE box), and select the SET button (RED box) in the Trigger options to display (B7). The Time Calendar (C2) will dis

Summary of the content on the page No. 6

D Setting up the DVR to Backup Files Enjoy 3 D1 NOTE: If you stop recording while backing up the files, the backup will go faster. Insert a USB flash drive into the USB port CONGRATULATIONS located on the front of the DVR. Press on your purchase! the BACKUP button and enter the User Id and Password if the system is password protected. This will display the BACKUP screen shown in (D1). Select the Date icon This Q-See product has undergone extensive quality control. If you have D2 and