Our goal is to provide you with a quick access to the content of the user manual for Pelco C2446M-D. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Pelco C2446M-D.
For your convenience
If looking through the Pelco C2446M-D user manual directly on this website is not convenient for you, there are two possible solutions:
Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Pelco C2446M-D on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual Pelco C2446M-D to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Pelco C2446M-D but the selected pages only. paper.
Summaries
Below you will find previews of the content of the user manuals presented on the following pages to Pelco C2446M-D. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Abstracts of contents
Summary of the content on the page No. 1
ADDENDUM Addendum No. C2498M-A Date November 17, 2005 ™ Manuals Affected Spectra III Series Dome Drive Manuals: C2487M-A and C2446M-D Manual Update The following are manual changes for Spectra III software Version 1.28 and greater and instructions for accessing a Spectra III EVS dome system. Presets Spectra III system presets have been upgraded from 40 to 99. Each of the user-definable presets can be programmed to use pan, tilt, and camera settings. The programmable presets a
Summary of the content on the page No. 2
Label Position The Title Text label can be positioned anywhere on the monitor. This feature DISPLAY SETUP LABEL POSITION allows you to customize the appearance of your monitor screen. PRESET LABEL 2 (SECS) [ZONE LABEL-------] ZONE LABEL 2 (SECS) [PRESET LABEL-------] To move the Title Text label, do the following: ZOOM 2 (SECS) [ALARM 1-------] AZIMUTH/ELEVATION 2 (SECS) [ALERT MESSAGE-------] [TITLE TEXT-------] DIRECTION OFF 1. Use the joystick to position the cursor beside a labe
Summary of the content on the page No. 3
OPERATION/PROGRAMMING ™ Spectra III Series ® DD53CBW18 & DD53CBW18-X C2487M-A (4/05)
Summary of the content on the page No. 4
OPERATION/PROGRAMMING MANUAL MODELS DD53CBW18 & DD53CBW18-X 18X DAY/NIGHT CAMERA
WELCOME Thank you for purchasing Pelco’s premier integrated dome system, Spectra III. Your new system features a high resolution, day/night camera/optics package with IR filter and programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about Spectra III’s features and commands, as well as a detailed menu tree. Getting Started You will need to install your dome system before using this man
Summary of the content on the page No. 8
HOW TO OPERATE YOUR DOME SYSTEM Operation How to Control Pan and Tilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far, do the following: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. 2. Release the button or joystick for one second. 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the 1 picture you want or reach the digital zoom limit. Zoom Wide Pr
Summary of the content on the page No. 9
Accessing Main Menu (Preset 95) You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers. CM6700/CM6800 1. Enter the number of the Spectra dome system and press the CAM key. 2. Enter 95 and hold the PRESET key for two seconds. 3. In the Ed
Summary of the content on the page No. 10
® KBD4000/KBD4002 (GENEX MULTIPLEXER) 1. Press the SPOT MONITOR key. 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key. 2. Position the asterisk in the YES row and press the F1 key. The main menu appears. Extended Coaxitron or RS-485 Mode 1. Enter 95 and press the PRESET SET key. 2. Press the F2 key. The main menu appears. ™ PelcoNet 1. Check the Set box. 2. Click
Summary of the content on the page No. 11
QUICK START GUIDE – SYSTEM SETUP SPECTRA III Presets LANGUAGE ENGLISH The following presets are reserved for special functions. ACK ALERT** Preset Function RESET CAMERA Quick Programming Guide 33 Flip command CYCLE CAMERA POWER REBOOT SYSTEM 88 IR filter IN (color) EXIT 89 IR filter OUT (black-white) Access main menu (preset 95). See the Accessing Main Menu 90-91 Manual limit stops (Preset 95) sect
Summary of the content on the page No. 12
10 C2487M-A (4/05)
Summary of the content on the page No. 13
LANGUAGE The language for the on-screen menus is selectable. Available languages include English, SPECTRA III Spanish, French, German, Italian, and Portuguese. The factory default language is English. LANGUAGE ENGLISH To change the display language: ACK ALERT* 1. Use the joystick to position the cursor beside LANGUAGE. RESET CAMERA 2. Press Iris Open. The cursor moves to the right, beside the current, selected language. CYCLE CAMERA POWER REBO
Summary of the content on the page No. 14
SYSTEM INFORMATION The system Information screen displays dome drive model, software version, available memory, SPECTRA III and other diagnostic information. LANGUAGE ENGLISH System settings cannot be changed using this screen. This screen is for reference only. ACK ALERT* Use the following steps to display the System Information screen: RESET CAMERA CYCLE CAMERA POWER 1. Use the joystick to position the cursor beside SYSTEM INFORMATION. REBOO
Summary of the content on the page No. 15
DISPLAY SETUP Display setup allows you to program how labels are displayed on the monitor. The following SPECTRA III labels are available: LANGUAGE ENGLISH PRESET LABEL Identifies preset. ZONE LABEL Identifies zone. ACK ALERT* ZOOM Identifies the amount of magnification. RESET CAMERA 1 2 AZIMUTH /ELEVATION Amount of pan from 0° and the amount of tilt from 0° CYCLE CAMERA POWER REBOOT SYSTEM horizontal. EXIT DIRECTION Displays compass direction
Summary of the content on the page No. 16
Summary of the content on the page No. 17
DOME SETTINGS AUTO FOCUS SPECTRA III LANGUAGE ENGLISH Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions. There are two auto focus settings: ACK ALERT* ON (default) If auto focus mode is set to ON, the camera will focus automatically when RESET CAMERA using pan, tilt, and zoom functions. CYCLE CAMERA POWER REBOOT SYSTEM OFF Focus is operated manually. To focus, press the Focus Far or Focus Nea
Summary of the content on the page No. 18
ZOOM LIMIT SPECTRA III LANGUAGE ENGLISH Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default setting is 144X. ACK ALERT* Cameras with 180X zoom (18X optical zoom and 10X electronic zoom) can be set for 18X, 32X, RESET CAMERA 72X, 144X, or 180X. CYCLE CAMERA POWER REBOOT SYSTEM EXIT ZOOM SPEED Zoom Speed allows the user to define how fast the dome will go from full wide zoom to the 18X optical zoom. The
Summary of the content on the page No. 19
IR CUT FILTER SPECTRA III LANGUAGE ENGLISH Spectra III has two modes of operation: color, and black and white. You can increase sensitivity in low light conditions by switching to black and white mode (removing the IR cut filter). Color mode is preferred in normal lighting conditions. ACK ALERT* RESET CAMERA The following are the settings for the IR cut filter: CYCLE CAMERA POWER REBOOT SYSTEM OFF Manual operation is controlled by preset 88 (f
Summary of the content on the page No. 20
SPECTRA III SHUTTER SPEED LANGUAGE ENGLISH Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value). ACK ALERT* AUTO (default) The electronic shutter speed is set automatically by the amount of light RESET CAMERA CYCLE CAMERA POWER sensed by the camera. REBOOT SYSTEM EXIT NUMERIC VALUE Spectra III SE dome system has several numerical sh
