Our goal is to provide you with a quick access to the content of the user manual for Pelco C2444M-C. Using the online preview, you can quickly view the contents and go to the page where you will find the solution to your problem with Pelco C2444M-C.
For your convenience
If looking through the Pelco C2444M-C user manual directly on this website is not convenient for you, there are two possible solutions:
Full Screen Viewing - to easily view the user manual (without downloading it to your computer), you can use full-screen viewing mode. To start viewing the user manual Pelco C2444M-C on full screen, use the button Fullscreen.
Downloading to your computer - You can also download the user manual Pelco C2444M-C to your computer and keep it in your files. However, if you do not want to take up too much of your disk space, you can always download it in the future from ManualsBase.
Many people prefer to read the documents not on the screen, but in the printed version. The option to print the manual has also been provided, and you can use it by clicking the link above - Print the manual. You do not have to print the entire manual Pelco C2444M-C but the selected pages only. paper.
Summaries
Below you will find previews of the content of the user manuals presented on the following pages to Pelco C2444M-C. If you want to quickly view the content of pages found on the following pages of the manual, you can use them.
Abstracts of contents
Summary of the content on the page No. 1
ADDENDUM Addendum No. C2499M-A Date November 17, 2005 ™ Manuals Affected Spectra III SE Series Dome Drive Manuals: C2443M-C, C2444M-C, and C2445M-D Manual Update The following are manual changes for Spectra III SE software Version 1.28 and greater and instructions for accessing a Spectra III EVS dome system. Presets Spectra III SE system presets have been upgraded from 80 to 150. Each of the user-definable presets can be programmed to use pan, tilt, camera settings, and motio
Summary of the content on the page No. 2
Label Position The Title Text label can be positioned anywhere on the monitor. This feature DISPLAY SETUP LABEL POSITION allows you to customize the appearance of your monitor screen. PRESET LABEL 2 (SECS) [ZONE LABEL-------] ZONE LABEL 2 (SECS) [PRESET LABEL-------] To move the Title Text label, do the following: ZOOM 2 (SECS) [ALARM 1-------] AZIMUTH/ELEVATION 2 (SECS) [ALERT MESSAGE-------] [TITLE TEXT-------] DIRECTION OFF 1. Use the joystick to position the cursor beside a lab
Summary of the content on the page No. 3
OPERATION/PROGRAMMING ™ Spectra III SE Series ® Models DD53M22 & DD53M22-X C2443M-C (1/04)
CONTENTS WELCOME ................................................................................................................................................................................................ 5 GETTING STARTED .......................................................................................................................................................................... 5 HOW TO OPERATE YOUR DOME SYSTEM ...................................................................
Summary of the content on the page No. 6
................................................................................................................................................................. 32 REVERSE ................................................................................................................................................................................ 34 BLANK ALL ABOVE/BLANK ALL BELOW .................................................................................................
Summary of the content on the page No. 7
4 C2443M-C (1/04)
Summary of the content on the page No. 8
WELCOME Thank you for purchasing Pelco’s premier integrated dome system, Spectra III SE. Your new system features a high resolution, monochrome camera with programmable dome drive software. This manual is designed to be a reference tool for the operation and programming of your system. Inside you will find information about Spectra III SE’s features and commands, as well as a detailed menu tree. Getting Started You will need to install your dome system before using this manual. Refer to the inst
Summary of the content on the page No. 9
HOW TO OPERATE YOUR DOME SYSTEM Operation How to Control Pan and Tilt Move joystick or press the direction keys left/right and up/down. Zoom Far To zoom far, do the following: 1. Press the Zoom Tele button or turn the joystick clockwise until zoom stops at the 32X zoom limit. 2. Release the button or joystick for one second. 3. To continue zooming (digitally), press the button or turn the joystick clockwise again until you have the 1 picture you want or reach the digital zoom limit. Zoom Wide Pr
Summary of the content on the page No. 10
Accessing Main Menu (Preset 95) You can call up the main menu on your monitor by programming (setting or creating) preset 95 (preset 28 if in AD32-preset mode). Programming preset 95 for Pelco’s controllers varies according to the type of controller you are using. Instructions for programming preset 95 are given below for various Pelco controllers. CM6700/CM6800 1. Enter the number of the Spectra dome system and press the CAM key. 2. Enter 95 and hold the PRESET key for two seconds. 3. In the Ed
Summary of the content on the page No. 11
® KBD4000/KBD4002 (GENEX MULTIPLEXER) 1. Press the SPOT MONITOR key. 2. Enter 95, then hold the PRESET key (approximately five seconds) until the main menu appears on the screen. MPT9500 Standard Coaxitron Mode 1. Enter 95 and press the PRESET SET key. 2. Position the asterisk in the YES row and press the F1 key. The main menu appears. Extended Coaxitron or RS-485 Mode 1. Enter 95 and press the PRESET SET key. 2. Press the F2 key. The main menu appears. ™ PelcoNet 1. Check the Set box. 2. Click
Summary of the content on the page No. 12
QUICK START GUIDE – SYSTEM SETUP SPECTRA III LANGUAGE ENGLISH Presets The following presets are reserved for special functions. ACK ALERT** Preset Function RESET CAMERA CYCLE CAMERA POWER Quick Programming Guide 33 Flip command REBOOT SYSTEM EXIT 90-91 Manual limit stops 92-93 Scan limit stops Access main menu (preset 95). See the Accessing Main Menu 95 Select main programming menu (Preset 95) sect
Summary of the content on the page No. 13
LANGUAGE The language for the on-screen menus is selectable. Available languages include English, SPECTRA III Spanish, French, German, Italian, and Portuguese. The factory default language is English. LANGUAGE ENGLISH To change the display language: ACK ALERT* 1. Use the joystick to position the cursor beside LANGUAGE. RESET CAMERA 2. Press Iris Open. The cursor moves to the right, beside the current, selected language. CYCLE CAMERA POWER REBO
Summary of the content on the page No. 14
SYSTEM INFORMATION The system Information screen displays dome drive model, software version, available memory, SPECTRA III and other diagnostic information. LANGUAGE ENGLISH System settings cannot be changed using this screen. This screen is for reference only. ACK ALERT* Use the following steps to display the System Information screen: RESET CAMERA CYCLE CAMERA POWER 1. Use the joystick to position the cursor beside SYSTEM INFORMATION. REBOO
Summary of the content on the page No. 15
DISPLAY SETUP Display setup allows you to program how labels are displayed on the monitor. The following SPECTRA III labels are available: LANGUAGE ENGLISH PRESET LABEL - Identifies preset. ZONE LABEL - Identifies zone. ACK ALERT* ZOOM RATIO - Identifies the amount of magnification. RESET CAMERA 1 2 CYCLE CAMERA POWER AZIMUTH /ELEVATION - Amount of pan from 0° and the amount of tilt from 0° horizontal. REBOOT SYSTEM DIRECTION - Displays compas
Summary of the content on the page No. 16
Summary of the content on the page No. 17
DOME SETTINGS TYPE OF LIGHTING SPECTRA III Pelco has calibrated settings that optimize the picture for indoor and outdoor lighting conditions. LANGUAGE ENGLISH There are two settings: OUTDOOR (default) ACK ALERT* INDOOR RESET CAMERA CYCLE CAMERA POWER REBOOT SYSTEM AUTO FOCUS EXIT Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions. There are two auto focus settings: ON (default) - If auto focu
Summary of the content on the page No. 18
ZOOM LIMIT SPECTRA III LANGUAGE ENGLISH Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The default setting is 176X. ACK ALERT* Cameras with 264X zoom (22X optical zoom and 12X electronic zoom) can be set for 22X, 32X, RESET CAMERA 88X, 176X, 220X, or 264X. CYCLE CAMERA POWER REBOOT SYSTEM EXIT ZOOM SPEED Zoom Speed allows the user to define how fast the dome will go from full wide zoom to the 22X optical zoo
Summary of the content on the page No. 19
SHUTTER SPEED SPECTRA III LANGUAGE ENGLISH Shutter speed is the duration of the electronic shutter. Program shutter speed to operate automatically (Auto) or manually (Numeric Value). ACK ALERT* AUTO (default) - The electronic shutter speed is set automatically by the amount of light RESET CAMERA sensed by the camera. CYCLE CAMERA POWER REBOOT SYSTEM EXIT NUMERIC VALUE - Spectra III SE dome system has several numerica
Summary of the content on the page No. 20
AUTO IRIS SPECTRA III LANGUAGE ENGLISH Auto iris is the lens function that automatically opens and closes the iris in response to changing light conditions. ACK ALERT* Program the auto iris to operate automatically or at a user-defined level. RESET CAMERA OFF - Auto iris is disabled, and control is always manual. CYCLE CAMERA POWER REBOOT SYSTEM AUTO (default) - The iris is adjusted automatically to produce a constant video output as EXIT dete
