Panasonic WV-CP484 user manual

Summary of the content on the page No. 1

(2) Solder the lens cable to the pins of the sup-
6 mm {1/4"}
2 mm {5/64"}
PRECAUTIONS INSTALLATION ABOUT SETUP MENUS SETTING PROCEDURES
plied connector.
The pin assignment is as follows.
1. Do not attempt to disassemble the camera. First, select a language for menu display and camera ID display.
Opening/Closing the Setup Menu
Pin 1: Power source; +9 V DC, 50 mA max.
Cautions:
To prevent electric shock, do not remove screws or covers.
Pin 2: Not used
It is possible to open the WV-CP480 TOP menu

Summary of the content on the page No. 2

5. Select a burst signal mode. The default setting is ON. 5. Select ON or OFF for SETUP-SW LOCK. The default setting is OFF. 6. Synchronization Setting (SYNC) 8. Motion Detection Setting (MOTION DET) SETTING PROCEDURES SPECIFICATIONS ON: Supplies the (color) burst signal with black-and-white composite video. OFF: Enables the SET button to open the back-focus adjustment screen while the cam- 1. Select a sync mode. When a series of changes in pictures is detected, the camera outputs an alarm to th