Summary of the content on the page No. 1
PTZ IP DOME CAMERA
OUTDOOR PTZ IP DOME CAMERA
INSTRUCTIONS
VN-V685U
VN-V686BU
VN-V686WPBU
VN-V686WPBU
VN-V685U/
VN-V686BU
Thank you for purchasing this product.
Before beginning to operate this unit, please read
the instruction manual carefully in order to make
sure that the best possible performance is
obtained.
For Customer Use:
Enter below the Serial No. which is located on the
body.
Retain this information for future reference.
VN-V685U/VN-V686BU/VN-V686WPBU
Model No.
Serial No.
LST081
Summary of the content on the page No. 2
Getting Started Safety Precautions Information for Users on Disposal of Old Equipment [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation. By disposing of this product c
Summary of the content on the page No. 3
● This installation should be made by a qualified service person and should conform to all local codes. ● This installation shall be in accordance with the National Electrical Code, ANSI/NFPA 70. ● The unit is to be powered by an AC 24 V power supply. The AC 24 V power supply should conform to the following:Class 2 only(For USA),Isolated power supply only(For Europe and other). ● Any Mention in this manual of Alarm inputs/ outputs have not been evaluated by UL to be used for Burglar Alarm
Summary of the content on the page No. 4
Getting Started These are general IMPORTANT SAFEGUARDS and certain items may not apply to all appliances. IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 5. Do not use attachments not recommended by the appliance
Summary of the content on the page No. 5
Contents Setting Using Internet Explorer Setting .........................................................46 How to open the setting page ..................46 Basic Settings1 .......................................47 Getting Started Basic Settings2 .......................................48 Safety Precautions ........................................2 Camera Page ..........................................51 Contents ........................................................5 Encoding Page ..........
Summary of the content on the page No. 6
Getting Started Intelligent Tracking Feature Main Features This feature enables you to track color information of the object that you selected by clicking. Linking the zoom feature enables tracking while automatically adjusting to the optimal magnification ratio. Support for PoE (Power over Ethernet) This camera supports PoE (IEEE802.3af) and enables Day/Night surveillance power supply through a LAN cable. This product is equipped with infrared filter T Connect to AC 24 V when using the heat
Summary of the content on the page No. 7
How to Read this Manual This manual contains the detailed instructions for using this unit. Please refer to [READ ME FIRST] for Symbols used in this manual description on the general usage of this Note :States precautions to be taken unit. during operation. For the latest information, please refer to the AReadmeB file in the CD-ROM supplied Memo :States restrictions on the functions with this product. or use of this equipment. For reference purposes. ● The supplied CD-ROM includes INST
Summary of the content on the page No. 8
Getting Started Safety precautions Operating Environment Mounting to a firm place Recommended Computer As the unit rotates at high speed, mount it on a Specifications firm place with sufficient strength to support OS : Windows XP (Professional or the vibration and weight of the unit Home Edition) (SP2) Mass:Approx. 1.9 kg (VN-V685U/VN-V686BU) :Windows Vista Business (SP1) :Approx. 5.5 kg (VN-V686WPBU) CPU : Pentium4 2 GHz or higher If the strength is weak, the vibration will cause Memory c
Summary of the content on the page No. 9
of this product. Be sure not to block vents around the Precautions product. This product discharges heat from the surface of the main unit. Do not install it at locations directly subjected to cold air such as near the vents of air-conditioners or at Storage and operating environment locations with high temperature. Condensation may occur inside the dome cover. VN-V685U/VN-V686BU is an indoor camera. It Use of this product and cables connected to this cannot be used outdoors. produc
Summary of the content on the page No. 10
Getting Started If you sense that the focus has become unclear Precautions (continued) due to temperature changes, use the Auto Foucua(AF) function or reset the focus manually. Transporting the unit Others (continued) Remove the connecting cables when transporting Depending on the stop position and rotation speed of the unit. the horizontal/vertical rotation platform, the running When transporting the unit, turn off the power of sound of the rotation platformfs motor may be heard,
Summary of the content on the page No. 11
Disclaimer Transportation The Automatic Tracking, Intelligent Tracking, and Do not throw away the original box of the unit. Motion Detection features are not features to Keep it and use it for transporting the unit in prevent theft or fire. Our company shall not be future. liable for any inconveniences or failures that occur. As the camera unit is of an easily rotatable We shall not be responsible for any structure, secure the camera unit inside the inconveniences or disturbances
Summary of the content on the page No. 12
Getting Started Precautions (continued) Zoom Operation The following phenomena are the results of the built-in lens performance and are not malfunctions. ● When manual operation or preset is selected, focus moves slightly after the zoom operation has Consumable parts stopped near the TELE edge. The following are consumable parts. They must be ● Manual zoom operation is not smooth. replaced once they reach their lifetime. The lifetime is only an estimation and differs according ● When Pr
Summary of the content on the page No. 13
Name and Function of Parts VN-V685U/VN-V686BU Ceiling mount section Terminal H Reverse side J A G B C F D E I A Fixing holes (x3) E Fall prevention wire fixing bracket This hole is for mounting the ceiling clamping bracket to This attaches to the fall prevention wire J of the camera. the ceiling or the ceiling recessed bracket (WB-S685: F Wire clamp fixing hole Sold separately). This is used to bundle wires. (A Page 19) B [AC24VHINPUT] AC 24 V Input terminal G Fall prevention wire mounting ho
Summary of the content on the page No. 14
Getting Started Name and Function of Parts (continued) VN-V685U/VN-V686BU (continued) Camera O K L L M P N K Fall Prevention Wire This is fixed to the fall prevention wire fixing bracket E of the ceiling clamping bracket. L Camera lock knob (x2) This mounts the camera on the ceiling and secures it so that it does not fall. M Front Mask N Lens Lens cannot be replaced. O Cable cover To pull the cables from the side and mount the camera, remove the cover. (A Page 20) P Dome Cover The dome cov
Summary of the content on the page No. 15
VN-V686WPBU Front side Inner structure of the camera A L B K C I J D E A H F G A Camera securing hole (4 locations) F LAN Cable This hole is used for mounting the camera on the This connects the unit to the network. wall. (A Page 24) B Cable connecting hole, cap G Dome Cover Remove the cap and pull out the cables from this The dome cover is a delicate object. Handle it hole for connection. with care. (A Page 27) Note: C Fall Pre
Summary of the content on the page No. 16
Getting Started Surveillance via Dual Stream Features Simultaneous distribution of JPEG and MPEG4 images enables real-time surveillance using MPEG4 (30 fps) and recording of JPEG images Surveillance Using Built-in Viewer at the same time. You can also lengthen the recording time by lowering the frame rate, This unit comes with a built-in ActiveX JPEG resolution, and picture quality settings for JPEG Viewer and MPEG4 Viewer. images. JPEG images and MPEG4 images of the camera can be monito
Summary of the content on the page No. 17
Alarm This unit comes with a motion detection feature and dual alarm input. During motion detection or alarm input, actions such as mail delivery, message transmission via TCP/UDP, alarm output, moving to a preset position, and changing of B&W mode settings can be triggered. These actions can also be triggered by combination of two alarm inputs. Installing an FTP server enables uploading of JPEG images before and after the alarm input time (pre-/post-recording) to the server. AAlarm Page
Summary of the content on the page No. 18
Connection/Installation (VN-V685U/VN-V686BU) ● Doing so detaches the ceiling clamping bracket Mounting the Camera from the camera. Prevent the bracket from dropping such as by performing this on a table. Memo: ● If the camera fixing lock knob is too stiff, push the Preparation knob hard while pressing the edge of the camera unit (A in the diagram) against the table you are Be sure to put on protective glasses to protect using. your eyes f
Summary of the content on the page No. 19
Note: Caution ● Do not connect an AC 24 V cable to AC 110 V power supply. The camera internal circuit ● Take note of the length, strength, pull and will be damaged. Should that happens, do material (insulation) of the fall prevention wire not use the camera. Bring it to your nearest and use one with a wire strength of more than JVC dealer for repair. (charged separately) 20kg. ● For safety reasons, turn on the power only ● The
Summary of the content on the page No. 20
Connection/Installation (VN-V685U/VN-V686BU) Mounting the ceiling clamping bracket Mounting the Camera to the ceiling (continued) 1 Secure the ceiling clamping bracket to the ceiling Preparation (continued) ● Install such that the ADFRONT markB of the ceiling 8 Mount the terminal cover clamping bracket faces the front. Return the terminal cover that was removed in step 3 to ● Ensure that the connection cables are not caught in its original position. The direction to pull out the cables betw
