Summary of the content on the page No. 1
DIVISION 28 ELECTRONIC SAFETY AND SECURITY
JVC U.S.A.
Professional Products Group
1700 Valley Road
Wayne, New Jersey 07470
(800) 582-5825
www.jvc.com/pro
This product specification is based on recognized industry standards for project documentation found within the
th
Construction Specification Institute (CSI) Project Resource Manual – CSI Manual of Practice [5 Edition],
MasterFormat™ [2004 Edition], SectionFormat™ [1997 Edition] and PageFormat™ [1999 Edition].
This specifi
Summary of the content on the page No. 2
Section 28.23.29 Video Surveillance Remote Devices and Sensors 6. 27 21 00 Data Communication Network Equipment 7. 27 22 00 Data Communication Hardware C. Multi-Section Requirements: Specifier Note: Product(s) in this section require interface to or integration with other closed circuit television components to operate as a complete system. As projects vary in scope and complexity; it is important to identify those sections which may require product integration, have an impact on sys
Summary of the content on the page No. 3
Section 28.23.29 Video Surveillance Remote Devices and Sensors 1.03 ADMINISTRATIVE REQUIREMENTS Specifier Note: Closed Circuit Television systems are often installed in multiple phases, similar to certain electrical components. It is important to schedule these phases in conjunction with construction phases. Improperly run wires or undesirable mounting locations may degrade system performance, and, may void the manufacturer’s warranty. A. Coordination: Ensure Closed Circuit Television
Summary of the content on the page No. 4
Section 28.23.29 Video Surveillance Remote Devices and Sensors Specifier Note: Regulations specific to this section vary by geographic location and Owner requirements. Coordinate article below with Local Authority Having Jurisdiction and/or Owner for requirements. Edit or revise article below as required for a specific project or specifiers practice. C. Regulatory Requirements: 1. Video Compression: a. MPEG-4: Part 2 – ISO/IEC 1449602 b. MJPEG 2. Emission / Immunity: a. FCC Part 15
Summary of the content on the page No. 5
Section 28.23.29 Video Surveillance Remote Devices and Sensors Specifier Note: The following specification is for a common camera with two different housing options. Differences will be noted by part numbers and enclosed with [brackets]. Select the appropriate camera/housing combinations and delete the specifications for the remaining camera/lens combination. A. Manufacturer: 1. JVC Professional Products Company Division of JVC AMERICAS CORP. 1700 Valley Road, Wayne, NJ; (800
Summary of the content on the page No. 6
Section 28.23.29 Video Surveillance Remote Devices and Sensors 1. Two (2) hardwire alarm outputs 2. Image upload over FTP 3. Network notification via TCP, UDP or email c. Digital motion detection d. Privacy Mask: free shape building e. Provide 8MB for pre and post alarm image recording buffer 12. Viewing adjustments: a. Free Scaling image clipping b. Digital Pan, Tilt and Zoom functions c. Focus Assistance 13. Display Mode: a. Custom b. LCD1 c. LCD2 d. CRT 14. Provide Bi-dir
Summary of the content on the page No. 7
Section 28.23.29 Video Surveillance Remote Devices and Sensors a. Monitor from personal computer b. Snapshot function c. Viewer shall be customizable via camera setup menu 5. Provide dual Application Program Interface (API): a. Compatibility: 1. JVC 2. Verint VSIP E. Networking 1. Provide IP Camera with TCP/IP, UDP/IP, HTTP, DHCP, SMTP, SNTP, FTP, DSCP, ARP, ICMP, RTP, IGMP, IPv4, IPv6 and VSIP communication protocol(s) 2. LAN compliance shall be IEEE802.3, 802.3u and 802.3af 3.
Summary of the content on the page No. 8
Section 28.23.29 Video Surveillance Remote Devices and Sensors a. Lens mount b. Back focus lock screw c. Monitor Out setting switch d. Camera reset button e. 4 pin Auto Iris connector f. Power On lamp 5. Rear controls, connectors or indicators: a. RCA connector: Monitor Video output – 1V peak to peak, 75 ohms resistance b. 3.5mm mini jack – monaural audio output c. RJ-45 (Category 5): 10BASE-T/100BASE-TX Network connection (auto negotiation) d. Alarm Terminal Block: Two (2) Alarm
Summary of the content on the page No. 9
Section 28.23.29 Video Surveillance Remote Devices and Sensors Specifier Note: The following may be deleted for projects of smaller scope in which full Division 1 project documentation is not provided or required. It is recommended that performance requirements be specified within the project documentation to ensure proper configuration and operation of the system. Contact your JVC Representative for assistance in developing performance specification specific to a particular project.
