Summary of the content on the page No. 1
EverFocus
Operation Instruction
HDcctv Megapixel 720p
3-Axis Outdoor IR Vandal-Proof
Bullet Camera
EZH5040
EZH5040
Summary of the content on the page No. 2
E V E R F O C U S E L E C T R O N I C S C O R P O R A T I O N Operation Instruction 2011 EverFocus Electronics Corp Please read this manual first for correct installation and operation. This manual should be retained for future reference. The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change without notice.
Summary of the content on the page No. 3
PRECAUTIONS 1. Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. 2. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein. Improper disassembly or introduct
Summary of the content on the page No. 4
ATTENTION! This is a class A product which may cause radio interference in a domestic environment; in this case, the user may be urged to take adequate measures. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential instal
Summary of the content on the page No. 5
Table of Contents 1. PRODUCT OVERVIEW...................................................................................................................... 6 1.1 FEATURES ........................................................................................................................................... 6 1.2 ACCESSORY PARTS LIST...................................................................................................................... 7 1.3 SPECIFICATIONS ...................
Summary of the content on the page No. 6
Chapter 1 1. Product Overview The EZH5040 is an HDcctv 3-Axis outdoor bullet camera with True Day/Night capability in an IP67 vandal resistant housing. Based on a Sony 1.3 megapixel progressive scan sensor for HD 720p resolution 100% digital images, it delivers vastly superior video quality compared to traditional CCTV images. This superior resolution not only captures more critical evidentiary information, but the inherent ability for megapixel video also extends the area of coverage,
Summary of the content on the page No. 7
1.2 Accessory Parts List Please be careful when you unpack the box due to the electronics devices inside. Check and make sure that you have all the items listed below inside the original box: HD CCTV Digital V ideo Camera SER VICE VIDEO OUTPUT TEST CABLE L WRENCH OPERATION MANUAL SCREW - 4ea Plastic anchors - 4ea Please Note: If an item appears to have been damaged in shipment, replace it properly in its carton and notify the sh
Summary of the content on the page No. 8
1.3 Specifications Pickup Device 1/3” Sony Megapixel Color Progressive CMOS Sensor Sensitivity 1lux/F=1.4; 0lux(IR LED ON) S/N Ratio Max. 50dB Video Format Main Output HDcctv 1.5Gb/s digital system Resolution Main Output 1280x720 Video Mode Main Output Field select 720p25, 720p30, 720p50, 720p60 Main Output Connector BNC Video Format Test Output NTSC/PAL selectable Test Output Connector Pin header; adapter cable to BNC supplied Exposure Control via lens DC iris Lens Type Vari-focal
Summary of the content on the page No. 9
1.4 Dimensions 9
Summary of the content on the page No. 10
Chapter 2 2. Installation Adjusting camera mounting position 10
Summary of the content on the page No. 11
External Zoom & Focus Adjustment 11
Summary of the content on the page No. 12
Service Video Out & OSD Control to HDcctv DVR HDcctv DVR or other HDcctv signal equipment ** NOTE **NOTE: 1. Separate two parts of the power adaptor 2. Remove the part with the screws 3. Attach it to the wire 4. Reconnect to end of cable 12
Summary of the content on the page No. 13
Chapter 3 3. OSD Menu & Configuration This chapter introduces how to configure the camera OSD menu. 13
Summary of the content on the page No. 14
14
Summary of the content on the page No. 15
15
Summary of the content on the page No. 16
16
Summary of the content on the page No. 17
17
Summary of the content on the page No. 18
18
Summary of the content on the page No. 19
19
Summary of the content on the page No. 20
20