Summary of the content on the page No. 1
ENGLISH FRANCAIS DEUTSCH ITALIANO ESPAÑOL
AXIS 207
AXIS 207W
AXIS 207MW
Installation Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 3 AXIS 207/207W/207MW Installation Guide This installation guide provides instructions for installing the AXIS 207/207W/207MW Network Camera on your network. For all other aspects of using the product, please see the User’s Manual, which is available on the CD included in this package, or from www.axis.com/techsup Installation steps 1. Check the package contents against the list below. 2. Hardware overview. Familiarize yourself wit
Summary of the content on the page No. 4
Page 4 AXIS 207/207W/207MW Installation Guide 2. Hardware overview Focus ring Antenna (wireless models) Status indicator LED (outer ring) Microphone I/O terminal connector (see page 5) Product ID & Serial number (S/N). The serial number may be required during the installation. Lock ring Network indicator LED Wireless indicator LED Control button (wireless models) connector Network (see page 5) Power connector (see page 5) Power indicator LED Dimensions AXIS 207: HxWxD = 85 x 55 x 34mm (3.3
Summary of the content on the page No. 5
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 5 Unit connectors Network connector - RJ-45 Ethernet connector. Supports Auto-MDIX (AXIS 207W/MW only) for automatic detection of straight or crossover cable. Using shielded cables is recommended. Power connector - Mini DC connector. 4.9-5.1V DC, max 4.0W. See product label for ± connection. I/O terminal connector - Used in applications for e.g. motion detection, event triggering, time lapse recording, alarm notifications, etc. It
Summary of the content on the page No. 6
Page 6 AXIS 207/207W/207MW Installation Guide Connection diagram Fuse: AXIS 207: 500mA AXIS 207W/MW: 1A Fuse Linear 3.3V + 2 o Power Supply Power - see table above. 1 o 2 o e.g. pushbutton Relay GND o 1 o 3 o o o Device 4 o o o IMPORTANT! This diagram applies to the AXIS Camera 207W and AXIS 207MW. The AXIS 207 has a different pinout and power - see the table above. LED indicators LED Color Indication Wireless Unlit Wired mode. Green Steady for connection to a wireless network. F
Summary of the content on the page No. 7
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 7 3. Install the hardware IMPORTANT! - The AXIS 207/207W/207MW is designed for indoor use only, and must always be positioned where it is not exposed to direct sunlight or strong halogen light, which can cause permanent damage to the camera’s ! image sensor. Damage as a result of exposure to strong light is not covered by the Axis warranty. 3a. Mount the camera Make a note of the serial number (S/N) located on the product label. Th
Summary of the content on the page No. 8
Page 8 AXIS 207/207W/207MW Installation Guide 4. Set an IP address To make it accessible on the network, the AXIS 207/207W/207MW must be assigned an IP address. Depending on the number of cameras you wish to install, the recommended method for setting IP addresses in Windows is either AXIS IP Utility or AXIS Camera Management. Use the method that best suits your purpose. Both of these free applications are available on the Axis Network Video Product CD supplied with this product, or they c
Summary of the content on the page No. 9
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 9 AXIS IP Utility - single camera/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually set a static IP address. Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS 207/207W/207MW. Automatic discovery 1. Check that the AXIS 207/207W/ 207MW is connected to the network and that po
Summary of the content on the page No. 10
Page 10 AXIS 207/207W/207MW Installation Guide AXIS Camera Management - multiple cameras/large installations AXIS Camera Management can automatically find and set IP addresses, show connection status, and manage firmware upgrades for multiple Axis video products. Set the IP address for a single device 1. Check that the camera is con- nected to the net- work and that power has been applied. 2. Start AXIS Camera Management. When the AXIS 207/207W/ 207MW appears in the window, double-click
Summary of the content on the page No. 11
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 11 Other methods of setting the IP address The table below shows the other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled. Use in operating Notes system Windows When enabled on your computer, the camera is automatically UPnP™ (ME or XP) detected and added to “My Network Places.” MAC OSX Applicable to browsers with support for Bonjour. Navigate to the Bonjour
Summary of the content on the page No. 12
Page 12 AXIS 207/207W/207MW Installation Guide 5. Set the password When accessing the AXIS 207/207W/207MW for the first time, the ‘Configure Root Password’ dialog will be displayed. 1. Enter a password and then re-enter it, to confirm the spelling. Click OK. 2. Enter the user name root in the ‘Enter Network Password’ dialog. Note: The default administrator user name root cannot be deleted. 3. Enter the password as set above, and click OK. If the password is lost, the AXIS 207/ 207W/207MW m
Summary of the content on the page No. 13
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 13 6. Configure the wireless connection Once the AXIS 207W/MW has been installed on your network, the wireless settings can be configured. These settings should always (i.e. both during installation and at all other times) be configured or changed in the camera first and in the wireless access point secondly. This ensures that the camera is always accessible when making changes. The AXIS 207W/MW automatically senses the available ne
Summary of the content on the page No. 14
Page 14 AXIS 207/207W/207MW Installation Guide Network type - Setting this to Master means the camera will attempt to access the network via an access point. The Ad-hoc option allows the camera to connect to other wireless devices, e.g. a laptop with a wireless connection. Security - The AXIS 207W/MW supports two security methods: • WPA-PSK/WPA2-PSK (recommended method) • WEP WPA-PSK/WPA2-PSK (Wi-Fi Protected Access - Pre-Shared Key) The AXIS 207W/MW uses a pre-shared key (PSK) for key managem
Summary of the content on the page No. 15
ENGLISH ENGLISH AXIS 207/207W/207MW Installation Guide Page 15 7. Adjust the focus Small dot above the lens assembly. Raised line on Focus ring focus ring. (inner ring) To focus: Open a browser and examine the image. If Status indicator required, adjust the focus (outer ring) ring until the focus is satisfactory. Note: Upon delivery, the raised line on the focus ring is aligned with the dot above the lens, and the focus is set to infinity. Resetting to the Factory Default Settings This
Summary of the content on the page No. 16
Page 16 AXIS 207/207W/207MW Installation Guide Accessing the AXIS 207/207W/207MW from the Internet Once installed, your AXIS 207/207W/207MW is accessible on your local network (LAN). To access the camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions. For more information on this and other topics, please visit the Axis Support Web at www.axis.
Summary of the content on the page No. 17
FRANCAIS AXIS 207/207W/207MW Guide d’installation Page 17 AXIS 207/207W/207MW Guide d'installation Ce guide d'installation vous explique comment installer la AXIS 207/207W/207MW Network Camera sur votre réseau. Pour d'autres informations sur l'utilisation de ce produit, consultez le Manuel de l'utilisateur, disponible sur le CD fourni, ou visitez le site www.axis.com/ techsup. Étapes de l'installation 1. Vérifiez le contenu de la livraison à l'aide de la liste ci-dessous. 2. Présentation du m
Summary of the content on the page No. 18
Page 18 AXIS 207/207W/207MW Guide d’installation 2. Présentation du matériel Antenne Bague de mise au point (modèles sans fil) Témoin DEL d’état (bague extérieure) Microphone Connecteur pour terminaux E/S (reportez-vous à la page 19) ID du produit et numéro de série (S/N). Le numéro de série peut être requis pendant l'installation. Bague de blocage Témoin DEL réseau Témoin DEL sans fil Bouton de (modèles sans fil) commande réseau Connecteur de (reportez-vous à la page 19) Connecteur d'
Summary of the content on the page No. 19
FRANCAIS AXIS 207/207W/207MW Guide d’installation Page 19 Connecteurs de l'unité Connecteur de réseau - Connecteur Ethernet RJ-45. Prend en charge Auto-MDIX (AXIS 207W/MW uniquement) pour la détection automatique de câble direct ou inverseur. Il est recommandé d'utiliser des câbles blindés. Connecteur - Miniconnecteur CC. 4,9-5,1 V CC, jusqu'à 4,0 W. Reportez-vous à l'étiquette du produit pour connaître la connexion ±. Connecteur pour terminaux E/S - Utilisé dans les applications, par exempl
Summary of the content on the page No. 20
Page 20 AXIS 207/207W/207MW Guide d’installation Diagramme de connexion Fusible : AXIS 207 : 500 mA AXIS 207W/MW : 1 A Fusible Alimen 3,3 V + 2 o -tation Alimentation (reportez linéaire -vous au tableau précédent) 1 o par exemple, un bouton de commande 2 o GND Relais o Dispositif 1 o 3 o o o 4 o o o IMPORTANT! Ce diagramme s'applique aux caméras AXIS 207W et AXIS 207MW. Caméra La caméra AXIS 207 présente une alimentation et un brochage différents (reportez-vous au tableau précédent
