Summary of the content on the page No. 1
ENGLISH FRANCAIS DEUTSCH ITALIANO ESPAÑOL
AXIS 209FD/FD-R
Installation Guide
Summary of the content on the page No. 2
Summary of the content on the page No. 3
ENGLISH ENGLISH AXIS 209FD/AXIS 209FD-R Installation Guide Page 3 AXIS 209FD/AXIS 209FD-R Installation Guide This installation guide provides instructions for installing the AXIS 209FD and AXIS 209FD-R Fixed Dome Network Camera on your network. For all other aspects of using the product, please see the User’s Manual, available on the CD included in this package, or from www.axis.com/techsup Installation steps 1. Check the package contents against the list below. 2. Hardware overview. See pa
Summary of the content on the page No. 4
Page 4 AXIS 209FD/AXIS 209FD-R Installation Guide Hardware overview Front view Rear view Position of rear cable exit (optional) Side view Base plate ∅102mm Screw holes Network cable with Dimensions model-specific Diameter 1 = 102mm (4.02”), Diameter 2 = 100mm (3.94”) connector Height = 39mm (1.54”) Weight = 0.18 kg (0.40lb) ∅100mm 39mm
Summary of the content on the page No. 5
ENGLISH ENGLISH AXIS 209FD/AXIS 209FD-R Installation Guide Page 5 Install the hardware IMPORTANT! - The casing of the AXIS 209FD is not approved for outdoor use and may only be installed in indoor environments. ! The AXIS 209FD-R is ruggedized and can be used in damp environments. Mount the camera The AXIS 209FD/AXIS 209FD-R can be mounted with the cable routed through the ceiling or from the side. The AXIS 209FD is supplied with a standard RJ-45 female network connector, on a 2 meter cabl
Summary of the content on the page No. 6
Page 6 AXIS 209FD/AXIS 209FD-R Installation Guide 4. Connect the network cable. If Product ID & Serial PoE is not supported by the number (S/N) label network switch, use the supplied PoE midspan/power Screw hole Screw hole injector to connect power to the AXIS 209FD/FD-R. Network cable with 5. Check that the indicator LED:s connector indicate the correct conditions. See the table on page 14 for further details. 6. Fasten the base plate to a flat ceiling or wall, using appropriate
Summary of the content on the page No. 7
ENGLISH ENGLISH AXIS 209FD/AXIS 209FD-R Installation Guide Page 7 Assign an IP address To make it accessible on the network, the AXIS 209FD/FD-R must be assigned an IP address. Depending on the number of cameras you wish to install, the recommended method for assigning IP addresses in Windows is either AXIS IP Utility or AXIS Camera Management. Use the method that best suits your purpose. Both of these free applications are available on the Axis Network Video Product CD supplied with this p
Summary of the content on the page No. 8
Page 8 AXIS 209FD/AXIS 209FD-R Installation Guide AXIS IP Utility - single camera/small installation AXIS IP Utility automatically discovers and displays Axis devices on your network. The application can also be used to manually assign a static IP address. Note that the computer running AXIS IP Utility must be on the same network segment (physical subnet) as the AXIS 209FD/FD-R. Automatic discovery 1. Check that the AXIS 209FD/FD-R is connected to the network and that power has been applied.
Summary of the content on the page No. 9
ENGLISH ENGLISH AXIS 209FD/AXIS 209FD-R Installation Guide Page 9 AXIS Camera Management - multiple cameras/large installations AXIS Camera Management can automatically find and set IP addresses, show connection status, and manage firmware upgrades for multiple Axis video products. Set the IP address for a single device 1. Check that the camera is connected to the network and that power has been applied. 2. Start AXIS Camera Management. When the AXIS 209FD appears in the window, double- click i
Summary of the content on the page No. 10
Page 10 AXIS 209FD/AXIS 209FD-R Installation Guide Set the password When accessing the AXIS 209FD/FD-R for the first time, the ‘Configure Root Password’ dialog will be displayed. 1. Enter a password and then re-enter it, to confirm the spelling. Click OK. 2. Enter the user name root in the dialog as requested. Note: The default administrator user name root cannot be deleted. 3. Enter the password as set above, and click OK. If the password is lost, the AXIS 209FD/FD-R must be reset to the
Summary of the content on the page No. 11
ENGLISH ENGLISH AXIS 209FD/AXIS 209FD-R Installation Guide Page 11 Lens adjustments Position To adjust the position of the lens, follow these steps: 1. Open the Live View page in your Locking screw web browser. 2. Using the supplied allen key, loosen the 2 locking screws, as shown here. Insert Allen key here 3. Insert the allen key into the small hole in the lens casing. 4. While checking the image in the Live View page, move the lens to the desired position. 5. When the camera shows the
Summary of the content on the page No. 12
Page 12 AXIS 209FD/AXIS 209FD-R Installation Guide Complete the installation 1. Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower to remove any dust from the lens. 2. To absorb any moisture in the Affix dry bag here (AXIS 209FD-R) AXIS 209FD-R, remove the supplied silica gel sachet (dry bag) from the plastic bag and affix inside the cover, behind the dome. 3. Replace the cover and gently tighten the tamper-proof screws by hand (torque < 0.4 Nm), usin
Summary of the content on the page No. 13
ENGLISH ENGLISH AXIS 209FD/AXIS 209FD-R Installation Guide Page 13 Other methods of setting the IP address The table below shows the other methods available for setting or discovering the IP address. All methods are enabled by default, and all can be disabled. Use in operating Notes system Windows When enabled on your computer, the camera is automatically UPnP™ detected and added to “My Network Places.” MAC OSX Applicable to browsers with support for Bonjour. Navigate to the Bonjour (10.4
Summary of the content on the page No. 14
Page 14 AXIS 209FD/AXIS 209FD-R Installation Guide LED indicators LED Color Indication Network Green Steady for connection to a 100 Mbit/s network. Flashes for network activity. Amber Steady for connection to 10 Mbit/s network. Flashes for network activity. Unlit No network connection. Status Green Steady green for normal operation. Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed. To configure, go to Setup > System Option
Summary of the content on the page No. 15
FRANCAIS FRANÇAIS FRANÇAIS Guide d'installation de l'AXIS 209FD/AXIS 209FD-R Page 15 Guide d'installation de l'AXIS 209FD/AXIS 209FD-R Ce Guide d'installation vous explique comment installer les appareils AXIS 209FD et AXIS 209FD-R Caméra réseau à dôme fixe sur votre réseau. Pour d'autres informations sur l'utilisation de ce produit, consultez le Manuel de l'utilisateur, disponible sur le CD fourni ou sur www.axis.com/techsup. Étapes de l'installation 1. Vérifiez le contenu de la livraison
Summary of the content on the page No. 16
Page 16 Guide d'installation de l'AXIS 209FD/AXIS 209FD-R Présentation du matériel Vue avant Vue arrière Position de la sortie arrière du câble (facultatif) Vue latérale Plaque de base ∅102mm Trous de vis Câble réseau avec connecteur propre à Dimensions chaque modèle Diamètre 1 = 102 mm, diamètre 2 = 100 mm Hauteur = 39 mm Poids = 0,18 kg ∅100 mm 39 mm
Summary of the content on the page No. 17
FRANCAIS FRANÇAIS FRANÇAIS Guide d'installation de l'AXIS 209FD/AXIS 209FD-R Page 17 Installation du matériel IMPORTANT ! - Le boîtier de l'AXIS 209FD n'est pas conçu pour une utilisation en extérieur et ne doit être installé qu'à l'intérieur. ! L'AXIS 209FD-R est consolidée et peut être utilisée dans des environnements humides. Montage de la caméra L'AXIS 209FD/AXIS 209FD-R peut être montée avec le câble acheminé dans le plafond ou par le côté. L'AXIS 209FD est équipée d'un connecteur de
Summary of the content on the page No. 18
Page 18 Guide d'installation de l'AXIS 209FD/AXIS 209FD-R 4. Connectez le câble réseau. Si Étiquette ID du l'alimentation PoE n'est pas produit et numéro de prise en charge par le série (S/N) Trou de vis commutateur réseau, utilisez le Trou de vis midspan PoE fourni pour brancher l'AXIS 209FD/FD-R. Câble de réseau avec 5. Vérifiez que les témoins DEL connecteur indiquent les conditions correctes. Pour plus d'informations, consultez
Summary of the content on the page No. 19
FRANCAIS FRANÇAIS FRANÇAIS Guide d'installation de l'AXIS 209FD/AXIS 209FD-R Page 19 Attribution d'une adresse IP Pour que l'appareil AXIS 209FD/FD-R soit accessible sur le réseau, vous devez lui affecter une adresse IP. Selon le nombre de caméras à installer, pour attribuer des adresses IP sous Windows, il est recommandé d'utiliser AXIS IP Utility ou AXIS Camera Management. Employez l'application qui vous convient le mieux. Ces deux applications gratuites sont disponibles sur le CD de la c
Summary of the content on the page No. 20
Page 20 Guide d'installation de l'AXIS 209FD/AXIS 209FD-R AXIS IP Utility - Une seule caméra/petite installation L'utilitaire AXIS IP Utility détecte et affiche automatiquement les périphériques Axis de votre réseau. Cette application sert également à attribuer manuellement une adresse IP statique. Notez que l'ordinateur exécutant l'application AXIS IP Utility doit se trouver sur le même segment de réseau (sous-réseau physique) que l'appare
