Summary of the content on the page No. 1
Summary of the content on the page No. 2
DocuMate 752 scanner user’s guide
Summary of the content on the page No. 3
Copyright © 2008 Visioneer, Inc. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. XEROX ® is a trademark of Xerox Corporation in the United States and/or other countries and is used under license. DocuMate ® is a registered trademark of Xerox Corporation used under license. All other Xerox product names and product numbers mentioned in this publication are trademarks of Xerox Corporation. The Visioneer brand
Summary of the content on the page No. 4
Table of Contents Table of Contents Welcome What’s in the Box . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 The Xerox DocuMate 752 Scanner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What You Need . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Documentation . . .
Summary of the content on the page No. 5
Table of Contents Scanning with the TWAIN Interface The Basic Steps to Open the TWAIN Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 The Two TWAIN Interface Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84 Scanning from the TWAIN Basic Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Scanning from the TWAIN Advanced Interface . . . . . . . . . . .
Summary of the content on the page No. 6
Welcome Your new Xerox DocuMate 752 scanner can quickly scan single- sided or double-sided stacks of color and black-and-white documents, up to 11.7" x 17" with the Automatic Document Feeder and up to 11.69" x 16.53" (A3 paper) on the Flatbed Glass. What’s in the Box Before proceeding, check the contents of the box. If items are missing or damaged, contact the dealer where you purchased the scanner. Power Supply Xerox DocuMate 752 Scanner Power Cord Replacement ADF Pad USB Cable Installation
Summary of the content on the page No. 7
Welcome The Xerox DocuMate 752 Scanner Scanner cover Document pad Glass Reference frame Paper stop Paper guide extension Paper guides Automatic Document Feeder (ADF) ADF cover release Scanner lock Status lights Power switch Power jack USB port ADF port ADF cable 2 DocuMate 752 Scanner User’s Guide
Summary of the content on the page No. 8
Welcome Scanner cover—Protects the document from light and contamination during scanning. Close the cover to put a stack of documents in the Automatic Document Feeder (ADF). Document pad—Holds documents in place on the scanner glass. Glass—Documents are placed face down, aligned at the arrow symbol in the upper-left corner. Reference frame—Marks on the border of the glass show where to align various paper sizes. Paper stop—Holds documents in place as they are ejected from the Automatic Docu
Summary of the content on the page No. 9
Welcome What You Need IBM-compatible Pentium 4 PC, or AMD equivalent with: • A DVD-ROM drive • An available Universal Serial Bus (USB) port • A Pentium II (or higher) processor or equivalent • Microsoft Windows operating system: 2000 (Service Pack 4), XP (Service Pack 1 and 2), or Windows Vista • Windows 2000 and XP: Minimum of 512 megabytes (MB) of internal memory Windows Vista: Minimum of 1 gigabyte (GB) of internal memory (RAM) • 350 MB minimum of free hard disk space A VGA Monitor The r
Summary of the content on the page No. 10
Installation Installation Installation is a quick, four-step process: 1. Assemble the scanner 2. Install the software 3. Connect the power supply 4. Connect the USB cable and turn on the power Before You Begin Please make sure of the following before you begin installation: • The information in this guide may cover software not provided with the scanner you purchased. Disregard any information about the software not applicable to your chosen product. Please visit our web site at www.xeroxsca
Summary of the content on the page No. 11
Installation Step 1: Assemble the Scanner To assemble the scanner: 1. Remove all shipping tape from the top and bottom of the scanner. 2. Holding the top with two hands, carefully lower it onto the Flatbed so the two hinges slide into their slots. 3. Remove any protective foam from the ADF Cover Release, then press the ADF Cover Release and open the Automatic Document Feeder cover. ADF Cover Release 4. Carefully remove any foam particles that may have gotten inside the Automatic Document F
Summary of the content on the page No. 12
Installation 5. Flip the Paper Guide up to reveal the two legs folded into the bottom of the tray. 6. Swing out the legs, then lower the Paper Guide Tray so the legs fit into their slots. 7. Flip up the Paper Guide Extension to fully extend it. 8. Slide the Scanner Locking Tab to its unlocked position. DocuMate 752 Scanner User’s Guide 7
Summary of the content on the page No. 13
Installation NOTE: The Locking Tab protects the scanner’s scan head by holding it securely in position. Lock the scanner when transporting it from one location to another, but always remember to unlock it before scanning. The scanner will not scan when locked. 9. Plug the ADF cable into the ADF port. Make sure the ADF cable is securely plugged into the port. The ADF will not function properly if the ADF cable is loose or unplugged. 10. Proceed to “Step 2: Install the Software.” 8 DocuMate
Summary of the content on the page No. 14
Installation Step 2: Install the Software To install the software: 1. Start Microsoft Windows and make sure no other applications are running. 2. Insert the installation DVD into your computer's DVD-ROM drive. The DVD automatically starts. NOTE: If the DVD does not start, check the following: • Make sure the DVD drive’s door is completely shut. • Make sure the DVD was inserted in the drive in the proper direction (label side up). To launch the DVD manually: • Open the Windows option for My Co
Summary of the content on the page No. 15
Installation 1. On the Main Menu, select Install Products. 2. Make sure the box for Scanner Driver is checked. 3. Click Install Now. 4. The Select Language window opens. Click the drop-down menu arrow and select the language you want to use. Click OK. 10 DocuMate 752 Scanner User’s Guide
Summary of the content on the page No. 16
Installation The Welcome to the One Touch 4.0 Setup Wizard opens. 5. Click Next. 6. On the Xerox License Agreement window, read the license agreement. If you accept the terms, select I Agree then click Next. If you choose not to accept the license agreement, the installation will terminate and the scanner driver will not be installed. The next window lists the choices of the drivers that you can install for your scanner. Note: Some of the options listed in this window may not be available
Summary of the content on the page No. 17
Installation • Full Install (One Touch, TWAIN and ISIS)—This is the recommended installation. It installs the One Touch 4.0 software which provides the necessary driver software for the scanner. It also installs scanning interfaces for TWAIN, for Microsoft’s Windows Image Acquisition (WIA) if your computer is running Windows XP, and for the ISIS driver. Installing this option means that you can use several different methods to scan, as explained in this User Guide. • TWAIN and ISIS—The TW
Summary of the content on the page No. 18
Installation During installation of the driver you will see this window asking you to select one of the images for your Color Space setting. The Color Space setting sets the gamma value for the scanner so scanned items look good on your monitor. Gamma controls the brightness of the midtones of colors. This setting can be changed later on as you’re scanning. 9. Select the option that looks best to you and click Next. The driver installation will now begin. 10. STOP when you see the “Complete
Summary of the content on the page No. 19
Installation Step 3: Connect the Power Supply Connect the power supply and power cord, and plug the power supply into an electrical outlet. To connect your DocuMate 752 scanner: 1. Plug the power supply into the power port on the scanner. NOTE: Only use the power supply (model number: HEG42- 240200-7L(A) LF from HiTron) included with your scanner. Connecting any other type of power supply may damage your scanner, and will void its warranty. 2. Plug the power cord into the power supply then in
Summary of the content on the page No. 20
Installation Step 4: Connect the USB Cable and Turn on the Power The DocuMate 752 scanner connects to any available USB port. Check your computer’s manual for USB port locations. NOTE: You can connect the scanner to your computer while the computer is running. 1. Remove any protective tape from the USB cable. 2. Plug the USB cable into the USB port on the scanner and then into a USB port on the computer. Connection to a USB 2.0 High Speed port provides optimum performance, however your scan
