Fujitsu M3097G\G+\DG user manual

Summary of the content on the page No. 1

Fujitsu SCSI Scanner Installation Procedures
Windows 95\98\98SE\ME\2000\XP

If you are installing the following models by means of the SCSI interface then use this
document.

SP10C M3093GX\DG Fi-4530C Fi-5120C
SP15C M3096GX Fi-4640S Fi-5220C
SP600C M3097G\G+\DG M4097D Fi-5530C
SP620C M3099G\GX\GH Fi-4750C\L Fi-5650C
SP3091DC FI-4120C\C2 M4099D Fi-5750C
SP3092DC Fi-4220C\C2 Fi-4860C Fi-5900C
SP93GX Fi-4340C Fi-4990C

If you are going to use the USB inte

Summary of the content on the page No. 2

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP 11. For Windows 2000 or XP scroll down to the “Enter key word or quoted phrase” box and type in “aspi”. 12. Next scroll down to the drivers section, click on ASPI_v470 or higher and follow the prompts to download it. 13. Afterwards go to that folder and unzip the file to the default Adaptec\ASPI folder. 14. Then go to start, run, browse to the Adaptec\ASPI folder, select ASPIINST.EXE and run it. 15. When the

Summary of the content on the page No. 3

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Installing ScandAll 21. 16. Back to the Scanner Setup Menu and click on Software Utility - ScandAll 21. 17. The ScandAll 21 installation wizard will appear. Click next and follow the prompts to complete the installation. 18. Once all of the above is completed then remove the Scanner Setup CD, Reboot your system, and go to Step E. Step D: Installing the drivers from our Web Page. Installing the STI-T

Summary of the content on the page No. 4

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP 10. Open the folder and you will see the saved driver file. Double click on the file to unzip it and the WinZip* self-extractor box will popup. Click on browse and select the Fujitsu Downloads folder, then click on Extract. The file will begin to unzip and when finished a message box will report the number of files unzipped. Click on OK and close WinZip. 11. In the ASPI Twain Download folder locate the set

Summary of the content on the page No. 5

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Step E: Unlocking the shipping lock. If your model scanner does not have a flatbed then proceed to Step F. The flatbed model scanners typically include a lock on the flatbed designed to protect the scanner during shipment. Before the scanner can be used the shipping lock must be unlocked. To unlock it do the following: 1. Located the shipping lock slider tab or knob underneath the end of the scanner.

Summary of the content on the page No. 6

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP Step F: Connecting the Scanner. Warning! Before proceeding ensure that the power is off when connecting or disconnecting the SCSI cable to the scanner or workstation. Failure to follow the procedure above could result in damage to the SCSI card, scanner, and/or your system. The default SCSI ID setting for the 5000/4000 series scanners is 5 and for the 3000 series scanners is 6. However, selecting a diff

Summary of the content on the page No. 7

Fujitsu SCSI Scanner Installation Procedures Windows 95\98\98SE\ME\2000\XP your model please consult the user manual or refer to the Scanner Hardware Interface Specifications Web page. Finally connect the power cord to the scanner and a wall outlet then turn on the scanner. For those models without a power switch plug in the power supply to the back of the scanner. To establish communication between the Scanner and your PC system turn on the scanner prior to turning on your syste