Summary of the content on the page No. 1
User Manual
Please read this manual before operating this scanner.
After you finish reading this manual, store it in a safe
place for future reference.
Summary of the content on the page No. 2
International ENERGY STAR Program ® As an ENERGY STAR Partner, CANON ELECTRONICS INC., has determined that this ® machine meets the ENERGY STAR Program guidelines for energy efficiency. ® The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use of computers and other office equipment. The program backs the development and dissemination of products with functions that effectively reduce energy consumption. It is an open sys
Summary of the content on the page No. 3
INTRODUCTION INTRODUCTION Thank you for purchasing the Canon DR-6010C Document Scanner. Please read this manual thoroughly before using the scanner to familiarize yourself with its capabilities, and to make the most of its many functions. After reading this manual, store it in a safe place for future reference. Manuals for the Scanner The User Manual is divided into two sections: Hardware and Software. The Hardware section contains general information and instructions for using the scanner. T
Summary of the content on the page No. 4
INTRODUCTION Symbols Used in This Manual The following symbols are used in this manual to explain procedures, restrictions, handling precautions, and instructions that should be observed for safety. WARNING Indicates a warning concerning operations that may lead to death or injury to persons if not performed correctly. To use the machine safely, always pay attention to these warnings. CAUTION Indicates a caution concerning operations that may lead to injury to persons, or damage to property
Summary of the content on the page No. 5
User Manual Hardware
Summary of the content on the page No. 6
Contents Chapter1 Before Using the Scanner ........................................................................1-1 1-1 Important Safety Instructions ..................................................................1-1 Installation Location.....................................................................................1-1 Power ..........................................................................................................1-2 Moving the Scanner ................................
Summary of the content on the page No. 7
4-2 Removing and Attaching the Rollers.......................................................4-5 Roller Replacement Cycle...........................................................................4-5 Resetting the Counter .................................................................................4-6 Removing/Attaching the Roller Unit ............................................................4-9 Removing and Attaching the Retard Roller ...............................................4-11 C
Summary of the content on the page No. 8
Chapter 1 Before Using the Scanner 1-1 Important Safety Instructions To ensure the safe operation of this scanner, be sure to read the safety warnings and precautions described below. Installation Location The performance of this scanner is affected by the environment in which it is installed. Make sure that the location where the scanner is installed meets the following environmental requirements. � Provide adequate space around the scanner for operation, maintenance, and ventilation. At leas
Summary of the content on the page No. 9
Chapter 1 Before Using the Scanner � Avoid exposing the scanner to rapid changes in temperature. If the room in which the scanner is installed is cold but rapidly heated, water droplets (condensation) may form inside the scanner. This may result in a noticeable degradation in scanning quality. The following conditions are recommended for optimal scanning quality: Room temperature: 10 °C to 32.5 °C (50 °F to 90.5 °F) Humidity: 20% to 80% RH � Avoid installing the scanner near equipment that gen
Summary of the content on the page No. 10
Chapter 1 Before Using the Scanner Handling WARNING Note the following precautions whenever using the scanner. Failure to do so may result in a fire or electric shock. ■ Never use alcohol, benzene, paint thinner, aerosol sprays, or any other highly flammable substance near the scanner. ■ Do not cut, damage, or modify the power cord. Do not place heavy objects on the power cord, and do not pull or excessively bend the power cord. ■ Never connect the power cord when your hands are wet. ■ Do not
Summary of the content on the page No. 11
Chapter 1 Before Using the Scanner ■ Do not place objects on top of the scanner. Such objects may tip or fall over, resulting in personal injury. ■ When unplugging the power cord, grasp it firmly by its plug. Do not pull directly on the power cord, as this may damage or expose the cord’s internal wiring, resulting in a fire or electric shock. ■ Leave sufficient space around the power plug so that it can be unplugged easily. If objects are placed around the power plug, you will be unable to u
Summary of the content on the page No. 12
Chapter 1 Before Using the Scanner 1-2 Features of the DR-6010C Document Scanner The main features of the DR-6010C document scanner are described below. � Fast Document Feeding The scanner can scan a maximum of 60 documents per minute in a range of sizes from business cards to LTR/A4 size. (Scanning conditions: Black and white, LTR/A4 size portrait, 200 dpi.) Scanning speed is the same for both color and grayscale scanning. � USB/SCSI Interface Supported The USB interface that was provided as
Summary of the content on the page No. 13
Chapter 1 Before Using the Scanner � Text Enhancement Mode This mode enables you to scan documents with dark backgrounds or documents with faint text written in pencil clearly. Note This mode may not function effectively, depending on the document type. � Dropout Color The scanner is equipped with a Dropout Color function that enables you to specify a color for the scanner to omit from the scanned image. � Color Enhancement The scanner is equipped with a Color Enhancement function that enabl
Summary of the content on the page No. 14
Chapter 1 Before Using the Scanner 1-3 Names and Functions of Parts This section describes the name and function of each part. Make sure to read this section and familiarize yourself with the parts of the scanner before using the scanner. ■ Front View (Feed Tray Open) Document Eject Tray Scanned documents are ejected here. (See Document Eject Tray Extension p. 3-3.) Open if the document extends beyond the edge of the eject tray. (See p. 3-3.) Document Feed Tray Place the document to be sc
Summary of the content on the page No. 15
Chapter 1 Before Using the Scanner ■ Back View Document Eject Tray 2 Open this tray to use the scanner in a straight path configuration. (See p. 3-3.) ■ Interfaces (See “2-4 Connecting the Scanner to the Computer,” on p. 2- 11.) DIP Switches Set the SCSI ID. SCSI Connector Connect to a 50-pin half-pitch (pin type) SCSI cable. 2 1 ON (Ventilation Holes) Power Connector USB Connector Connect the provided USB cable or a USB cable that supports Hi-Speed USB 2.0. CAUTION � Do not block the venti
Summary of the content on the page No. 16
Chapter 2 Setup 2-1 Setup Procedure In order to prepare the scanner for use, read and follow the instructions in each section below. Installation Requirements Installing the Software Connecting the Scanner to the Computer Turning the Power ON IMPORTANT � Be sure to install the software before connecting the scanner to the computer. � If you connect the scanner to the computer before installing the software, a wizard screen such as shown below will appear when you turn power to the scanner ON. I
Summary of the content on the page No. 17
Chapter 2 Setup 2-2 Installation Requirements To use the DR-6010C scanner, your computer must satisfy the following system requirements. � One of the following operating systems: - Microsoft Windows 2000 Professional SP4 or later - Microsoft Windows XP Professional SP3 or later - Microsoft Windows XP Home Edition SP3 or later - Microsoft Windows XP Professional x64 Edition SP2 or later - Microsoft Windows Vista Home basic, Home Premium, Business, Ultimate or Enterprise SP1 or later Note Microso
Summary of the content on the page No. 18
Chapter 2 Setup � If the CPU, memory, interface card, and other specifications do not satisfy the installation requirements, the scanning speed may be greatly reduced and transmission may take a long time. � Even if the computer satisfies the recommended specifications, the scanning speed may vary, depending on the scan settings. � The ISIS/TWAIN Drivers provided with the scanner do not necessarily operate on all ISIS- or TWAIN-compatible applications. For details, contact your application s
Summary of the content on the page No. 19
Chapter 2 Setup 2-3 Installing the Software This section describes how to install the required software. Setup Disc When you insert the Setup disc supplied with the scanner into the CD-ROM drive of your computer, the menu shown below should appear. If this menu does not appear, use Explorer to access the CD- ROM drive and execute the file “SETUP.EXE.” Note The Setup disc of the DR-6010C is configured as follows. Menu screen Typical Installation All of the indicated software is installed. Read M
Summary of the content on the page No. 20
Chapter 2 Setup Software Installation Install the software before connecting the scanner to the computer. 1 Log onto Windows with an account that has Administrator privileges. IMPORTANT � Be sure to log on as an Administrator. � Close all other applications before installing the software. 2 Insert the DR-6010C Setup disc into the PC’s CD-ROM drive. The menu screen appears automatically when you insert the CD-ROM into the CD-ROM drive. If the setup wizard does not start up, execute setup.exe in
