Elektra Beckum 091 001 8442 user manual

Summary of the content on the page No. 1

U1A0168.fm
091 001 8442
Tischverbreiterung . . . . . . . . . . . . . . . . . . .3
Table Extension . . . . . . . . . . . . . . . . . . . . . .5
Rallonge latérale de table . . . . . . . . . . . . . .7
Tafelverbreding . . . . . . . . . . . . . . . . . . . . . .9
Allargamento del tavolo . . . . . . . . . . . . . . .11
Extensión de la mesa . . . . . . . . . . . . . . . .13
Alargador da bancada . . . . . . . . . . . . . . . .15
Bordforbredelse . . . . . . . . . . . . . . . . . . . . .17
Bordforlengel

Summary of the content on the page No. 2

XA0028E1.fm Operating Instruction ENGLISH ENGLISH 2. Put both clamping plate (7) and coil 1. Please Read First! spring (8) on the carriage bolt (9) as ilustrated: The offset ends of the • Read these instructions before use. clamping plate must point towards Also observe the instructions for the the carriage bolt's head. circular saw, the safety instructions in particular. 78 2. Mounting Locations 1 9 2 10 11 If the table side extension is too low: Loosen screws (13) on the underside 3. Inse

Summary of the content on the page No. 3

ENGLISH 5. Move scale, until the value indicated by the left-hand edge of the rip A fence corresponds with the value measured at the workpiece. 6. Tighten scale fixing screw (17) again. 7. Set rip fence exactly to 320 mm (for UK 220 and PK 200) or 520 mm (for PKF 255) and lock it in position. B 8. Loosen scale fixing screw (18) of the base system rail. A = B 1. Set rip fence exactly to 320 mm (for UK 220 and PK 200) or 520 mm (for PKF 255) and lock it in position. 2. Loosen knurled nuts on