Winegard SharpShooter SS-3000 user manual

Summary of the content on the page No. 1

Performance Specifications
Channels:
®
VHF: 2-13
WINEGARD
UHF: 14-69
Dimensions: 5”H x 26-3/4”W x 4-1/4”D
Amplifier Gain: VHF/UHF: 7-10 dB average
TM
SharpSh oter
90 DAY LIMITED WARRANTY
Amplified Low Profile
Winegard Company warrants this Winegard product (excluding receiver) against
Indoor Television Antenna
any defects in materials or workmanship within two (90) day from date of purchase. No
warranty claim will be honored unless at the time the claim is made, you present proof
of purchase to

Summary of the content on the page No. 2

TM Troubleshooting About Your SS-3000 SharpSh oter Antenna TM No picture, or the tuner is displaying no “signal.” Thank you for choosing the Winegard .Winegard antennas are SharpSh oter TM 1. Make sure that the is connected to the correct “antenna in” SharpSh oter designed to deliver sharp, clear, high definition signal reception. At Winegard, input on the set-top box or TV. our engineering department is de

Summary of the content on the page No. 3

Operating Your SS-3000 Installation TM Locating your SS-3000 SharpSh oter Antenna Attaching the clips to the reflector. TM Your is a precision instrument and should be placed in a SharpSh oter 1. Lay the Reflector flat on the table. location that is best for receiving TV signals. 2. Grip the Reflector with your thumb and index finger and bend the Reflector’s top and bottom edges towards you. (See Fig. 2, 3) TM Your

Summary of the content on the page No. 4

Installation (cont.) Installation Attaching the Reflector to the Antenna Attaching the Antenna with reflector to the Base 1. Starting from the right side, slide the Clip that is attached to the Reflector 1. Route the 6’ Mini Coax Cable through the Base and screw it securely to the diagonally into the notch at the back of the Antenna. (See Fig. 4, 5) Antenna. 2. Once the Clip is pushed in, slide it to the side so that it forms a 90 degree 2. Slide the Antenna with Reflector onto the Base. angl