Summary of the content on the page No. 1
CCD Monochrome
Video Camera
CS3330Bi S E R I E S
CS3330Bi CS3330BLi
Specification
CONTENTS
Before use – General safety instructions
1. PRODUCT DESCRIPTION………..................................................................
1
2. FEATURES...................................................................................................
1
3. CONSTITUTION.................................................................................
Summary of the content on the page No. 2
BEFORE USE - GENERAL SAFETY INSTRUCTIONS This instruction manual contains important information for the operator (user) and/or people in the vicinity to avoid personal injury, or property damage. • Prior to use, read this operation manual carefully to fully understand its instructions for correct use. • After reading, keep this manual near the equipment for future reference. WARNINGS & CAUTIONS [Definition of markings] The meaning of each mark used in this instruction manual is give
Summary of the content on the page No. 3
●Handling Precautions WARNING Immediately cease use of the equipment in the event of abnormality or malfunction. If abnormal conditions are present, such as smoke, a burning smell, ingress of water or foreign matter, or if the equipment is dropped or malfunctions, fire or electric shock may result. If such abnormalities occur, disconnect the power plug from the outlet and contact your sales unplug representative. Do not use the equipment in locations subject to water splas
Summary of the content on the page No. 4
CAUTION Observe the following when installing the equipment: · Do not cover the equipment with a cloth, etc. · Do not place the equipment in a narrow location where heat is likely to accumulate. Otherwise, heat will accumulate inside the equipment, possibly resulting in a fire. Instruction Do not place the equipment in locations subject to high moisture, oil fumes, steam, or dust. Otherwise, fire or electric shock may result. Avoid Do not install the equipment
Summary of the content on the page No. 5
CASES FOR INDEMNITY (LIMITED WARRANTY) We shall be exempted from taking responsibility and held harmless for damage or losses incurred by the user in the following cases. In the case damage or losses are caused by fire, earthquake, or other acts of God, acts by a third party, deliberate or accidental misuse by the user, or use under extreme operating conditions. In the case of indirect, additional, consequential damages (loss of business interests, suspension of business
Summary of the content on the page No. 6
Usage Precautions Handle carefully Do not drop the equipment or allow it to be subject to strong impact or vibration, as such action may cause malfunctions. Further, do not damage the connection cable, since this may cause wire breakage. Environmental operating conditions Do not use the product in locations where the ambient temperature or humidity exceeds the specifications. Otherwise, image quality may be degraded or internal components may be adversely affected.
Summary of the content on the page No. 7
1. PRODUCT DESCRIPTION Model CS3330Bi/BLi is monochrome video camera with charge coupled device (CCD). These cameras are composed of camera head and camera controller (CCU). 2. FEATURES The video cameras have the following technical features. (1) High resolution A 380,000 pixel CCD incorporated in the unit provides horizontal resolution of 570 lines. (2) H
Summary of the content on the page No. 8
4. SPECIFICATION 4-1 Mechanical specifications Overall dimensions and weight Camera head: Refer to the attached camera head diagram. Camera control Unit: 220(w) x 60(H) x 240(D) mm (excluding rubber casters) Mass : approx. 2.6 kg Camera cable: 6.3mm(dia.) x 3 m length Lens mount: C mount 4-2 Electrical specifications TV system: Based on EIA standard P
Summary of the content on the page No. 9
Phase difference: The phase difference between the trailing edge of VD and the trailing edge of HD must be as shown below. st nd 1 field 2 field VD HD t1 ＝0+/-5 micro sec t2=1/fH/2 +/-5 micro sec Output signal: HD,VD negative polarity Level: 3.5 to 4.5V(p-p) / 1k ohm terminated 8.0 to 9.0V(p-p) / high Pulse width: HD: 6.36±0.5 micro sec VD: 572±5 micro sec Repeat frequency: fH =15.73426 kHz fv =2 fH
Summary of the content on the page No. 10
Electronic shutter: ON/OFF switching (TV synchronization): Shutter speed: Selectable at 1/60sec, 1/125sec, 1/250sec, 1/500sec, 1/1,000sec, 1/2,000sec,1/4,000sec, (during exposure): 1/10,000sec and flicker less CCD operation mode: frame store mode Power supply: AC100V +/-10%, 50/60Hz,150mA ± 20% Ambient condition: Temperature: From 0 through 40 degrees Humidity: From 30 through 90% (No condensing)
Summary of the content on the page No. 11
5. APPEARANCES 5-1 Appearance of the camera head 5 This specification subjects to change without notice. D4134992A
Summary of the content on the page No. 12
5-2 Appearance of the camera head with mount metal fitting Specifications Material: Lens mount: Stainless steel Frame, cover: Aluminum alloy Mount metal fitting: Aluminum alloy Finish coating: Frame, cover: Black alumite finish Mount metal fitting: Elidite finish C mount Cover Frame Lens mount Mount metal fitting 2-M3 depth:6 1/4-20 UNC depth:6 6 This specifica
Summary of the content on the page No. 13
5-3 Appearance of the camera control unit for CCD camera (CS3330Bi) 7 This specification subjects to change without notice. D4134992A
Summary of the content on the page No. 14
5-4 Appearance of the camera control unit for CCD camera (CS3330BLi) 8 This specification subjects to change without notice. D4134992A
