Summary of the content on the page No. 1
Wireless TV Link SLV5405
User Manual
Summary of the content on the page No. 2
A 5 4 6 3 7 2 1 8 WIRELESS TV LINK RECEIVER
Summary of the content on the page No. 3
EN Contents Page Overview 4 Control and display elements 4 Your Wireless TV Link 5 Safety 5 Installation 6 Operation 6 Enjoy your Wireless TV Link 6 Troubleshooting 8 Information 10 Health and safety 10 Maintenance and service 10 Recycling and disposal 10 Warranty 11 Glossary 11 3
Summary of the content on the page No. 4
EN Overview Control and display elements A Receiver 1 On/off switch 2 Power light > red: standby > green: on > blinking: remote control signalling 3 Source selector buttons (+/-) > in combination with the SLV5400 transmitter 4 Integrated remote control blaster light 5 Antenna 6 Wireless channel selection switch 7 SCART port for TV2 8 Power input connector (DC 12V) 4
Summary of the content on the page No. 5
EN Your Wireless TV Link You can say good-bye to wires. With your Wireless TV Link receiver you can now wirelessly connect a third TV and choose between four devices to watch on your third TV. Safety • Read the instructions in this manual carefully before you connect, install and use the product. � Keep this manual for future reference. � The product is for indoor use only. � Do not use the product close to water. � Do not expose the product to extreme heat. � In case of technical difficulti
Summary of the content on the page No. 6
EN Installation For basic installation, see the quick start guide that came with your Wireless TV Link. Remove interference on TV3 L 1 Find the CHANNEL switch on the transmitter. DC 12V 2 Check the setting of the CHANNEL switch. Channel 1 2 3 4 R 3 Find the CHANNEL switch on the receiver (A). CHANNEL 1 4 Set the CHANNEL switch to the same number as 2 3 4 on the transmitter. Make sure to set the CHANNEL switch on both the original and the new receiver. Operation Enjoy your Wireless
Summary of the content on the page No. 7
EN Operation Watch a cable TV program on TV3 Your VCR or DVD recorder needs to be connected to the transmitter (A) of the Wireless TV Link and connected to the Cable-TV signal. 1 Switch on the transmitter. SELECT STANDBY 2 Switch on the VCR or DVD recorder. 3 Take the remote control of the VCR or DVD SLV5400 WIRELESS TV LINK TRANSMITTER recorder with you. 4 Go to TV3. 5 Switch on TV3. 6 Switch on the receiver (A). WIRELESS TV LINK RECEIVER 7 Press + or - on the receiver (A) to select the VC
Summary of the content on the page No. 8
EN Troubleshooting Problem Tip No image or wrong � Make sure SCART cables are image on TV3 firmly inserted. � Make sure the receiver (A) is connected to TV3. � Make sure both receiver (A) and transmitter are switched on. � Make sure the video source is switched on. � Make sure the correct SCART input on TV3 is selected. � Select the correct video source with +/- on the receiver (A). > In combination with the SLV5400 transmitter. � If the video source gives proper image on TV1: Make sure
Summary of the content on the page No. 9
EN Troubleshooting Problem Tip The video sources � Point the remote control directly do not respond to to the receiver (A). � Replace the batteries of the the remote remote controls with new ones. control commands � Install the remote control blaster from TV3 cord. See the user manual of the Wireless TV Link. � The maximum operating distance of the remote control is 5 m. The image of the � Turn off the auto standby mode of the video source. See its user video source dis- manual. appears
Summary of the content on the page No. 10
EN Information Health and safety The product transmits and receives radio waves when it is switched on. The product complies with the standards that are defined for it. The quality of the image can be influenced by the use of microwave ovens. Other wireless systems (Bluetooth, wireless networks etc.) can also have influence on the quality of the image. The product is based on RF technology. Therefore the product can suffer from the same kinds of interference as GSMs, portable radios and o
Summary of the content on the page No. 11
EN Information Warranty One year limited warranty For 12 month from the date of purchase the manufacturer repairs or replaces any faulty product free of charge, subject to proof of purchase, provided the fault has not been caused by improper handling or use, and provided the product has not been damaged, whether as a result of an accident or of repair by others than the manufacturer. Glossary CVBS Video standard for showing colors on a TV. Easylink Gives a VCR or DVD recorder the possibi
Summary of the content on the page No. 12
AQ95-56F-614KR (report No.) EC DECLARATION OF CONFORMITY We , Philips Consumer Electronics B.V., P&A CC: Building SBP6 (manufacturer's name) P.O.Box 80002, 5600 JB Eindhoven, The Netherlands (manufacturer's address) declare under our responsibility that the electrical product: Philips SLV5405 -/00 -/05 ( Rx: SLV5405 -/00-R ) (name)
Summary of the content on the page No. 13
Need help? Troubleshooting See page 8 Online help: www.philips.com/support Helpline België/Belgique/Belgien 070 222 303 (€ 0.17) Danmark 3525 8759 Deutschland 0900 1101211 (€ 0.12) España 902 888 784 (€ 0.15) France 08 9165 0005 (€ 0.23) ÅëëÜäá 0 0800 3122 1280 Ireland 01 764 0292 Italia 899 23 45 06 (€ 0.25) Luxemburg/Luxembourg 40 6661 6544 Nederland 0900 8407 (€ 0.20) Norge 2270 8111 Österreich 0900 060 827 (€ 0.20) Portugal 2 1359 1442 Schweiz/Suisse/Svizzera 0900 001 600 Suomi 0600 412 001
