Summary of the content on the page No. 1
CONTENTS
GENERAL SAFETY REQUIREMENTS 2 ELECTRONIC PROGRAM GUIDE 11
CONNECTORS AND DEFINITION 3 TO DISPLAY SUBTITLES 11
FRONT PANEL CONTROLS 3 TO SELECT AUDIO LANGUAGE 11
REMOTE CONTROL FUNCTIONS 4 TO DISPLAY TELE-TEXT 11
INSTALLATION 4 CREATING FAVORITE CHANNELS 11
SELECTING OUTPUT SIGNAL TO TV 5 EDITING CHANNELS 12
SETTING THE TIME 5 EDITING SATELLITE AND TP 12
ANTENNA CONFIGURATION 6 EDITING CHANNEL PIDS 13
SEARCHING CHANNELS 7 TO SET PARENTAL LOCK 13
CONFIGURING DiSEqC POSITIONER 7 TO RESET Y
Summary of the content on the page No. 2
CONNECTORS AND DEFINITIONS Please do not connect power to the STB until all other connections have been made. REMOTE CONTROL FUNCTIONS NOTE: POS Positioner key is active only in DiSEqC 1.2 mode. It is not active in USALS mode. C1: AC IN (Power Cord) Connect this to the power outlet (100-240 V AC 50/60 Hz) C2: ON Power on / off switch C3: TV OUT (UHF Output) Connect TV or VCR to this connector (OPTIONAL) C4: ANTENNA IN Connect TV antenna to this connector (OPTIONAL) C5: LNB IN (IF Input) Con
Summary of the content on the page No. 3
OSD Setting – Menu Color Configuration Time Setting Configuration Menu Items: Select an item to change its color. Time Mode: Select Manual to set the time manually. Red, Green, Blue: Enter with 0-9 keys or press left Auto mode is only possible after channels are tuned. / right to change color value Region/City: For Auto mode, select your location. If Default: If you wish to return to default settings, your location is not listed, select User Defined.
Summary of the content on the page No. 4
Positioner --- USALS Configuration SEARCHING CHANNELS Press MENU key and go to INSTALL. Select Channel Search. Longitude, Latitude: Enter your location with 0-9 Channel Search Configuration and PAGE up / down keys. Example; London – Sat Search: Select Single if searching manually. Longitude = 0 and Latitude = 51.5N Select Multiple if searching all automatically. USALS: Press OK to go to position automatically. Satellite: Press OK, select a satellit
Summary of the content on the page No. 5
Channel Search Blind Search – Transponders Channel Browser Operation To change channel: Use PAGE and CH up / down keys. Press OK on the required channel. Press OK again or press EXIT. To change satellite: Use SAT key and select satellite. Alternatively use left / right keys to select satellite. Press OK on the required channel. All Satellites list: To display collective list of channels for all satellites. Use left / right and select All Satellites
Summary of the content on the page No. 6
ELECTRONIC PROGRAM GUIDE (EPG) Favorite Ch Configuration To display correct EPG it is important to set the time first. Press red key, the following Add: Press green key on the required channel. menu will open. Favorite icon will appear against the name. Delete: Press red key on the channel to be TV EPG Guide Operation deleted. Favorite icon will be removed. Rename: Press yellow key to display keyboard. Channel List: Select chann
Summary of the content on the page No. 7
Sat/TP Edit --- Satellite Configuration Note: After ‘Lock’ is turned ‘On’, channels locked in edit menu will require a password to open. If STB lock is on, a password is required to operate any function. After applying Add: Press green key to display keyboard. Select new password, the default password is no longer operative. If you loose or forget your and press OK on letters to name the satellite and password, apply the master password given on page 16. press EXIT. Name is ad
Summary of the content on the page No. 8
LNB Power & Polarization Vertical + 13V, Horizontal + 18V, Max Current 500 mA, Short Circuit Protection 22KHz Tone Frequency 22 KHz +/- 2 KHz, Amplitude 0.7 +/- 0.2V DiSEqC Control Version 1.0, 1.2 & USALS Demodulation QPSK Input Symbol Rate 1-45 Ms/s, SCPC & MCPC FEC Decoder Convolutional Code Rate, 1/2, 2/3, 3/4, 5/6 and 7/8 with constraint length K=7 EDITING TP IN CHANNEL SEARCH MENU System Memory Press MENU, go to INSTALL and select Channel Search. Configure following items. Main Core Proc
Summary of the content on the page No. 9
Physical Specifications Size (W X H X D) W 280 mm, H 48 mm, D 218 mm Weight (Net) Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice -------------------------------------------------------------------------------------------------- MASTER PASSWORD 6699 This is the master password for your STB. Cut this section out and keep it in a safe place. It will be useful later
