Summary of the content on the page No. 1
Digital Set-Top Box with Irdeto Embedded
Summary of the content on the page No. 2
Contents ....................................... Safety GB2 ....................................... Copyright & Glossary GB3 ....................................... Reference GB4 ....................................... STB Connections GB5 ~ GB10 ....................................... Remote Control Unit GB11 ~ GB12 ....................................... Guide of Functions GB13 ~ GB14 ....................................... Guide of Main Menu GB15 ~ GB36 .......................................
Summary of the content on the page No. 3
Safety This STB has been manufactured to satisfy the international safety standards. Please read the following safety precautions carefully. MAINS SUPPLY : 190 - 250 V AC 50/60 Hz OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this may result in fire electric shock. LIQUIDS : The STB shall not be exposed to dripping or splashing and that no objects filled with liquids, such as base, shall be placed on the apparatus. CLEANING : Disconnect the STB from the wall outlet b
Summary of the content on the page No. 4
Copyright & Glossary Copyright TM • VIACCESS is a trademark of France Telecom. • CryptoWorks(TM) is a trademark of Philips Electronics N.V. • Irdeto is a trademark of Mindport BV. • Nagravision is a registered trademark of Kudelski S.A. • Conax is a trademark of Telenor Conax AS. • “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Warning HUMAX cannot be held responsible for any kind of problems caused by the use of unofficial software. The use of software versions other th
Summary of the content on the page No. 5
Reference 1. Connect DiSEqC 1.0 All our receivers are designed to be DiSEqC 1.0 compatible. This allows multiple antennas to be connected to the STB simultaneously. If you have two or more fixed antennas or LNBs, you can use a DiSEqC 1.0 switch. 1. Connect the coaxial cable from the first LNB to the LNB 1 or LNB A input connector of the DiSEqC switch. 2. Connect the coaxial cable from the second LNB to the LNB 2 or LNB B input connector of the DiSEqC switch. 3. Do the same for other LNBs. 4. Con
Summary of the content on the page No. 6
STB Connections Front Panel 1 TV LED(AMBER) The LED lights on in TV mode. RADIO LED(GREEN) 2 The LED lights on in RADIO mode. 3 DISPLAY Shows service number, error messages, RCU commands and time in Standby mode. STANDBY LED(RED) 4 Indicates that the STB is under standby. STANDBY 5 Press to switch between Operation and Standby modes. 6 TV/RADIO Press to switch between TV and Radio modes. , 7 Use to change services down/up. GB5
Summary of the content on the page No. 7
Rear Panel 1 LNB IN Use to connect an antenna. 2 LNB OUT Use it when connecting to another STB. 3 RS-232C Use it when connecting to your PC. 4 AUDIO/VIDEO OUTPUT Audio/video signal from your STB to VCR or TV. 5 RF INPUT Use to connect a general Aerial Antenna and CABLE jacks to a RF input jack on the STB. 6 RF OUTPUT Use to connect a RF signal from your STB to RF(ANT) input jack on your TV. S/PDIF 7 Output for connection to a digital amplifier. 8 TV SCART For the audio/video input of the TV.
Summary of the content on the page No. 8
STB Connections There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of a RCA cable to the RCA connector on the STB and the other end to a RCA socket on your TV. 2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your TV. 3. Connect your TV antenna to the RF IN connector on the STB for receiving terrestrial channels.
Summary of the content on the page No. 9
TV with VCR and Motorised System(DiSEqC 1.2) 1. Connect one end of a RCA cable to the RCA connector on the STB and the other end to a RCA socket on your VCR. 2. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end to the RF IN connector on your TV. 3. Connect one end of a RF lead to the RF IN connector on your VCR and the other end to the RF OUT connector on the STB. 4. Connect the coaxial cable from the LNB of your motorised system to the LNB IN socket on the STB
Summary of the content on the page No. 10
STB Connections There are several ways of connecting the STB to your existing Audio/TV system. We recommend using one of the following set-up for best results: TV only 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a RF lead to the RF OUT connector on the STB and the other end to the RF IN connector on your TV. 3. Connect your TV antenna to the RF IN connector on the STB for receiving terres
Summary of the content on the page No. 11
TV with VCR and Motorised System(DiSEqC 1.2) 1. Connect one end of a 21-pin SCART cable to the TV SCART connector on the STB and the other end to a SCART socket on your TV. 2. Connect one end of a 21-pin SCART cable to the VCR SCART connector on the STB and the other end to a SCART socket on your VCR. 3. Connect one end of a RF lead to the RF OUT connector on your VCR and the other end to the RF IN connector on your TV. 4. Connect one end of a RF lead to the RF IN connector on your VCR and the
Summary of the content on the page No. 12
Remote Control Unit GB11
Summary of the content on the page No. 13
1 NUMERIC BUTTONS 10 TV/SAT(Reserved) Press to select a service, enter your PIN code or numeric on the menu. 11 TV/RADIO Press to switch between TV and Radio modes. 2 INFORMATION(RED) Press to display the programme information box 12 MUTE on the screen. And this button functions same as Press to temporarily cut off the sound. the RED button on the menus. 13 MENU 3 SOUNDTRACK(GREEN) Press to display the Main Menu on the screen Press to display the soundtrack list for the current or return to th
Summary of the content on the page No. 14
Guide of Functions Information Box(I-Plate) The details of service part and event part are automatically displayed on the I-Plate when pressing the i button( ) or changing services. I-Plate is divided into service part and event part. SERVICE-PART(Left side of the box) SERVICE PART consists of the following items: • I-Plate icon, Current time and Dolby Digital symbol • Service name, Service number, icons • Subtitle, Teletext, Scrambling service symbol (These are automatically displa
Summary of the content on the page No. 15
Volume Control To adjust the volume level, use the buttons or buttons. To temporarily stop the volume, press the MUTE( )button. To cancel mute, press the MUTE( )button again or press the buttons or buttons. Soundtrack When you want to change the audio language of current service, press the GREEN( )button firstly. The on-screen menu is displayed on the top to left side of the screen. To change the audio language: 1. buttons : Use to select the au
Summary of the content on the page No. 16
Guide of Main Menu 1. Select Service The select service displays the required service list which can be viewed in Simple or Advanced mode. 2. TV Guide Your STB has an Electronic Programme Guide(EPG) to help you navigate through all the possible viewing options. The TV Guide supplies information such as programme listings and start and end times for all available services. In addition, detailed information about the programme listings and start and end times for all available services. In add
Summary of the content on the page No. 17
1. Select Service To select the desired in the service list, you should firstly display the service list using OK button. Use buttons to select a service and press OK button. Also use buttons to select a service directly in the service list. The contents of service list are as follows: Simple Service List 1. Use the buttons to select “Select Service” from the Main Menu and press the OK button. 2. Use the buttons to select “Simple” from the Main Menu and
Summary of the content on the page No. 18
Guide of Main Menu Service Favourite Service Favourite 1. Press the GREEN( )button on the remote control unit to select the Favourite service list. Note : The groups are labeled in four different alphabet characters (A, B, C, D). 2. Use the buttons to select a favourite group that you want. 3. Press the GREEN( )button to toggle group and service list. Service Network 1. Press the YELLOW( )button on the remote control unit to select the Network service list. 2. Use th
Summary of the content on the page No. 19
2. TV Guide You can watch a programme being shown and reserve it in the TV Guide mode. To enter the TV Guide mode Press the EPG( )button on the remote control unit or select the TV Guide on the Main Menu. To select the TV/Radio Guide Press the TV/Radio( )button on the remote control unit and TV Guide will be switched to the Radio Guide. TV Guide mode includes four different modes. To select each mode, use the following buttons: • RED ( )button : Use to display the current and next pr
Summary of the content on the page No. 20
Guide of Main Menu Reserved mode Shows the programme lists that you have already reserved on the TV Guide or Information box. Maximum eight programmes can be reserved. This programme list includes service name, date, duration time, reservation mode and event name. To cancel the Reserved service, select a programme you want to cancel using the buttons and then press the WHITE( ) button. Quick mode Shows a simple TV Guide like an Information box. This mode shows in the A/V playback
