Summary of the content on the page No. 1
Paul, Discovery is suggesting that we add some language to the manual about setting up GigE
output for multicast and unicast addresses. In their labs they had a difficult time setting up
GigE out because the device they were connecting to didn't provide an ARP response. Jeff
Paul, we need to add Web GUI info about transcoding in appliance mode and how to
understand the possible output bandwith limitations.
Motorola DSR-6400 Series
Satellite Multiplex Receiver/
Transcoder Operator Guide
DSR-
Summary of the content on the page No. 2
WARNING OPERATION PRECAUTIONS The unauthorized modification of any unit and the sale and use of any such unit is prohibited by law. Any such modification or alteration of this WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR product or any unauthorized reception of television programming could MOISTURE. subject the user and seller and party modifying the unit to fines, imprisonment, and civil damages. NOTE: This equipment has been tested and found to compl
Summary of the content on the page No. 3
Important Safety Instructions • Unplug this apparatus during lightning storms or when unused for long periods of time. • Read these instructions. • Refer all servicing to qualified service • Keep these instructions. personnel. Servicing is required when the • Heed all warnings. apparatus has been damaged in any way, such as when the power-supply cord or plug is • Follow all instructions. damaged, liquid has been spilled, or objects • Do not use this apparatus near water. have fallen into
Summary of the content on the page No. 4
ADVERTENCIA PRECAUCIONES DE OPERACIÓN La modificación no autorizada de cualquier unidad, y la venta y el uso del mismo está prohibida por ley. Cualquier modificación o alteración ADVERTENCIA: PARA EVITAR RIESGOS DE INCENDIOS O DESCARGA ELÉCTRICA, NO EXPONGA ESTE EQUIPO A LA de este producto o cualquier recepción no autorizada de programación LLUVIA O LA HUMEDAD. de televisión puede someter al usuario y al vendedor, y a la parte que modifica la unidad a multas, prisión y daños civiles. NOTA:
Summary of the content on the page No. 5
Instrucciones de seguridad importantes • Proteja el cable de alimentación para evitar pisarlo o que quede apretado, especialmente en • Lea estas instrucciones. los enchufes y tomas de corriente, y revise el • Guarde estas instrucciones. punto de salida del aparato. • Use exclusivamente los accesorios • Considere todas las instrucciones. especificados por el fabricante. • Siga todas las instrucciones. • Desconecte el aparato durante tormentas • No use este aparato cerca del agua. eléctrica
Summary of the content on the page No. 6
Summary of the content on the page No. 7
Table of Contents Chapter 1 Introducing the DSR-6400 Series...................................................................................................... 13 Key Features................................................................................................................................ 13 Model and Transcoding Capacity................................................................................................. 14 PID Mapping...............................................
Summary of the content on the page No. 8
1 Port Menu..................................................................................................................................... 36 ID Field.................................................................................................................................. 36 Mode Field ............................................................................................................................ 36 Sat Field..............................................................
Summary of the content on the page No. 9
VCT (Virtual Channel Table) Field ........................................................................................ 50 VCN (Virtual Channel Number) Field.................................................................................... 50 PORT Field ........................................................................................................................... 50 Channel Menus ..................................................................................................
Summary of the content on the page No. 10
1 Status1 Menu ............................................................................................................................... 64 FrontPanel Field.................................................................................................................... 64 Input Type Field .................................................................................................................... 64 Status2 Menu ....................................................................
Summary of the content on the page No. 11
Status11 Menu ............................................................................................................................. 72 Addr Field.............................................................................................................................. 72 Link Field............................................................................................................................... 72 Status12 Menu ............................................................
Summary of the content on the page No. 12
Summary of the content on the page No. 13
1 Introducing the DSR-6400 Series The Motorola DSR-6400 Series products are commercial Satellite Receiver/Transcoders, designed for broadcasters and headend operators for receiving digital satellite services. The DSR-6400 Series units will process both high-definition and standard-definition video services. After the DSR-6400 Series units are properly installed and configured, they will be ready to receive authorization and control information from the satellite signal source provider. Key
Summary of the content on the page No. 14
1 • MPEG-2 HD and/or SD ASI and GigE outputs • Web Server GUI for remote operation • Advanced audio processing - Supports pass-through and decoding/decompression of Dolby AC-3 and pass-through of the Dolby E audio compression algorithm • Message Mailbox - Supports text message delivery from the uplink for display on the IRD’s front panel. • DPI support - Digital (SCTE-35) ad-splicing message support in both broadcast and unit- addressable formats • DTMF cue tone and Form-C contact closure rel
Summary of the content on the page No. 15
PID Mapping The DSR-6400 Series uses a PID mapping scheme for the output services for ASI and GIGE output ports. The following two tables show each of the individual service components and their assigned PID values on each MPEG program. These PID values affect the output ports: ASI OUT 1, ASI OUT 2, and GIGE, as shown below. For multiple instances of the same component type, the unit increments the PID value by one. PID Assignments: ASI OUT 1 Port MPEG Processor Number PMT Video Audio1 A
Summary of the content on the page No. 16
1 Processor / Back Panel Associations Figure 1-2 shows how Processor numbers (PR) coincide with the Cue Tone ports and Relay ports on the back panel. For example, a DSR-6402 has two processors. The two services use cue tones Q1 (for Processor 1) and Q2 (for Processor 2). To execute Ad insertions, the two processors also use Relay port 1 (for Processor 1) and Relay port 2 port (for Processor 2). Figure 1-2 also shows how all PR fields are linked within the menu system. RELAY 1 ALARM PRIMARY AU
Summary of the content on the page No. 17
2 Connecting the DSR-6400 Series Unit Unpacking and Connecting the DSR-6400 Series Unit Cable connections, described in this chapter, are made to the back panel of the unit. Earth Ground Relay/Alarm L-Band RF Input Ports 1 - 8 Terminals Fan Unit Primary Audio Out Fan Unit RF IN PRIMARY AUDIO RELAY 1 ALARM Q1+ Q1- G Q2+ Q2- L+ L- G R+ R- NO CM NC G NO CM NC 12 3 4 5 6 7 8 ® TVPass Card ASI IN ASI OUT 1 ASI OUT 2 VIDEO OUT OSD VIDEO OUT RELAY CF CONTACT TYPE RATING 1A 1 Q3+ Q3- G Q4+ Q4- L+ L- G
Summary of the content on the page No. 18
2 Note: Additional audio and data connectors may be ordered through Phoenix Contact part PRIMARY AUDIO RELAY 1 ALARM numbers 1881354 / 1881370. Q1+ Q1- G Q2+ Q2- L+ L- G R+ R- NO CM NC G NO CM NC CAUTION: When connecting any of the eight RF IN ports, the RELAY RF-IN Antenna cable should CONTACT only be connected while the unit RATING 1A is properly grounded and the 30 VDC L+ L- G R+ R- NO CM NC G NO CM NC Q3+ Q3- G Q4+ Q4- shield of the coaxial cable should SECONDARY AUDIO RELAY 2 REL
Summary of the content on the page No. 19
Rack Mounting Guidelines The DSR-6400 Series unit, with the supplied mounting brackets is designed for installation in an EIA standard 19-inch (480 mm) equipment rack. Place each unit in a stable and level position within the rack and ensure that all front enclosure screws are tightened to 14 in- lbs. If multiple DSR-6400 Series units are installed in a rack assembly, the operator may choose to have a certification agency evaluate the condition of the rack. Mechanical Loading The mounting
Summary of the content on the page No. 20
2 Connecting the DSR-6400 Series To connect a DSR-6400 Series to the GigE signal, see "GigE Input" on page 31. To connect a DSR-6400 Series to an ASI signal, see "ASI Input" on page 31. To connect a DSR-6400 Series to an RF signal: 1. Determine which satellite, transponder, Virtual Channel Table (VCT) number, and Virtual Channel is to be used. Contact the programmer for this system information so that the desired services can be received. 2. Connect the desired L-Band (satellite antenna LNB or
