Summary of the content on the page No. 1
ST 3000 Smart Transmitter
Release 300 and Smart Field
Communicator Model STS103
User’s Manual
34-ST-25-14
6/08
Honeywell Process Solutions
Summary of the content on the page No. 2
Copyright, Notices, and Trademarks © Copyright 2008 by Honeywell Inc. June 2008 While this information is presented in good faith and believed to be accurate, Honeywell disclaims the implied warranties of merchantability and fitness for a particular purpose and makes no express warranties except as may be stated in its written agreement with and for its customer. In no event is Honeywell liable to anyone for any indirect, special or consequential damages. The information and speci
Summary of the content on the page No. 3
About This Publication This manual is intended as a detailed “how to” reference for installing, piping, wiring, configuring, starting up, operating, maintaining, calibrating, and servicing Honeywell’s family of Release 300 ® Series 100 and Series 900 ST 3000 Smart Transmitters. It is based on using a model STS103 ® Smart Field Communicator (SFC ) as the operator interface for the ST 3000 transmitter. Be aware that data in this manual overlaps information in the ST 3000 Smart Transmitter
Summary of the content on the page No. 4
References Publication Publication Binder Binder Title Number Title Number Smart Field Communicator 34-ST-11-14 Model STS103 Operating Guide ST 3000 Smart Transmitter 34-ST-33-39 Series 100 and Series 900 Release 300 Installation Guide For R400 and later: PM/APM Smartline Transmitter PM12-410 Implementation/ TDC 2045 Integration Manual PM/APM Optional Devices Symbol Definitions This CAUTION symbol on the equipment refers the user to the Product Manual for ad
Summary of the content on the page No. 5
Table of Contents References.................................................................................................................................................. iv Technical Assistance .................................................................................................................................xiii SECTION 1 —OVERVIEW - FIRST TIME USERS ONLY................................................. 1 1.1 Introduction..........................................
Summary of the content on the page No. 6
Table of Contents SECTION 6 —CONFIGURATION ...................................................................................59 6.1 Introduction ..................................................................................................................................... 59 6.2 Overview ......................................................................................................................................... 60 6.3 Entering a Tag Number................................
Summary of the content on the page No. 7
Table of Contents SECTION 10 —CALIBRATION..................................................................................... 183 10.1 Introduction....................................................................................................................................183 10.2 Overview........................................................................................................................................184 10.3 Calibrating Analog Output Signal .................
Summary of the content on the page No. 8
Figures Figure 1 Typical ST 3000 Differential Pressure Transmitter................................................................................2 Figure 2 Functional Block Diagram for Transmitter in Analog Mode of Operation............................................3 Figure 3 Functional Block Diagram for Transmitter in Digital DE Mode of Operation. .....................................4 Figure 4 Typical SFC Communication Interface.........................................................
Summary of the content on the page No. 9
Figures Figure 48 Typical Piping Arrangement for Liquid Level Measurement with DP Type Transmitter with Remote Seals ...........................................................................................147 Figure 49 Location of Failsafe Direction Jumper on PWA. ...............................................................................156 Figure 50 Summary of Save and Restore Database Function.............................................................................159 Fig
Summary of the content on the page No. 10
Tables Table 1 ST 3000 Pressure Transmitter Family. .................................................................................................6 Table 2 SFC Model Differences........................................................................................................................9 Table 3 Local Smart Meter Available Options................................................................................................13 Table 4 Start-up Tasks Reference..................
Summary of the content on the page No. 11
Tables Table 50 Description of Display Indicators Shown in Figure 51.................................................................... 163 Table 51 Summary of Typical Local Smart Meter Indications. ...................................................................... 165 Table 52 Possible Smart Meter Error Codes. .................................................................................................. 166 Table 53 Inspecting and Cleaning Barrier Diaphragms ...................
Summary of the content on the page No. 12
Acronyms AP.......................................................................................................................... Absolute Pressure APM .......................................................................................................Advanced Process Manager AWG .............................................................................................................. American Wire Gauge DE ........................................................................
Summary of the content on the page No. 13
Technical Assistance If you encounter a problem with your ST 3000 Smart Transmitter, check to see how your transmitter is currently configured to verify that all selections are consistent with your application. If the problem persists, you can reach Honeywell’s Solution Support Center for technical support by telephone during normal business hours. An engineer will discuss your problem with you. Please have your complete model number, serial number, and software revision number on ha
Summary of the content on the page No. 14
Summary of the content on the page No. 15
Section 1 —Overview - First Time Users Only 1.1 Introduction Section contents This section includes these topics: Section Topic See Page 1.1 Introduction....................................................................................1 1.2 ST 3000 Transmitters.....................................................................2 1.3 Smart Field Communicator.............................................................8 1.4 Transmitter/SFC Order...................................
Summary of the content on the page No. 16
1.2 ST 3000 Smart Transmitters About the transmitter The ST 3000 Smart Transmitter comes in a variety of models for measurement applications involving one of these basic types of pressure: • Differential Pressure • Gauge Pressure • Absolute Pressure The transmitter measures the process pressure and transmits an output signal proportional to the measured variable over a 4 to 20 milliampere, two-wire loop. Its major components are an electronics housing and a meter body as shown in F
Summary of the content on the page No. 17
1.2 ST 3000 Smart Transmitters, Continued About the transmitter, Besides the process variable (PV) output, the transmitter also provides continued its meter body temperature as a secondary variable which is only available as a read-only parameter through the SFC when the transmitter is in its analog mode. See Figure 2. Figure 2 Functional Block Diagram for Transmitter in Analog Mode of Operation. Factory Characterization Data Electronics Housing Meter Body PROM DP or PP Sensor
Summary of the content on the page No. 18
1.2 ST 3000 Smart Transmitters, Continued Figure 3 Functional Block Diagram for Transmitter in Digital DE Mode of Operation. Factory Characterization Data Electronics Housing Meter Body PROM DP or PP Sensor Temperature Microprocessor Digital I/O A/D Digital signal Sensor broadcasts PV in floating point Static Pressure format over Sensor 20 mA loop. Modular Electronics Terminal Block Pressure Series and model Honeywell’s line of ST 3000 Smart Transmitters includes these two number
Summary of the content on the page No. 19
1.2 ST 3000 Smart Transmitters, Continued Series and model You can quickly identify what series and basic type of transmitter you number data, have from the third and fourth digits in the key number. The letter in the continued third digit represents one of these basic transmitter types: A = Absolute Pressure D = Differential Pressure F = Flange Mounted G = Gauge Pressure R = Remote Seals The number in the fourth digit matches the first digit in the transmitter Series. Th
Summary of the content on the page No. 20
1.2 ST 3000 Smart Transmitters, Continued Table 1 ST 3000 Pressure Transmitter Family. Transmitter Type Series 100 Model Series 900 Model Differential STD1xx STD9xx Pressure Differential Pressure STF1xx STF9xx with Flange on One Side Dual-Head Gauge Not Available STG9xx Pressure In-Line Gauge and STG1xL STG9xL Absolute Pressure STA1xL STA9xL Gauge and Absolute STG1xx STG9xx Pressure STA1xx STA9xx Continued on next page
