Summary of the content on the page No. 1
Satellite Radio Receiver · Quick Guide
Model SA10113
Warning: This manual contains important safety and operating information.
Please read, understand, and follow the instructions in this manual. Failure to do
so could result in personal injury, death, and/or damage to your MyFi receiver,
accessories, and/or to your vehicle or other property.
Summary of the content on the page No. 2
stuff... What’s in the box? remote control belt clip/stand wearable antenna with two clip options protective case home stand MyFi home antenna home power audio cable adaptor
Summary of the content on the page No. 3
rechargeable headphones lithium ion battery vehicle antenna vehicle cradle cassette adaptor vehicle power adaptor receiver swivel mount (with extra adhesive pad) flush mount vent mount cleaning kit
Summary of the content on the page No. 4
Controls Turn on your MyFi by pressing the power button. You should be able to hear channel 1, the XM Preview Channel, through your ear buds or attached stereo/speakers. 4 IR lens – aim display – backlit high- resolution LCD display your remote control here 2go button – store up to five hours of XM programming mode button – switch between “LIVE” XM and “MY XM” playback arrow buttons – cycle through channel categories (“LIVE”); skip to previous or next song (“MY XM”) preset/direct button – s
Summary of the content on the page No. 5
Before you begin, take a moment to familiarize yourself with your MyFi’s controls. Most basic functions can be accessed using the front panel buttons and the dial. More advanced features are accessed using the “menu” button and the dial. power button – press and hold to turn your MyFi on and off dial – rotate to highlight a channel or menu option; push in to make selection, or press and hold for TuneSelect menu button – access advanced features and configuration options memory button – save and
Summary of the content on the page No. 6
ready... Getting set up Install the battery Be sure to charge your battery for several hours on the home stand before use. 1 Set up Assemble your MyFi and its home stand as shown. 2 Connect to stereo Plug the AC adaptor into an outlet. Connect the home antenna and connect the line out to either your home stereo or powered (PC type) speakers. 3 5V DC ANT LINE OUT
Summary of the content on the page No. 7
set... Activate and explore Turn the dial to highlight channel 0, and press the dial in to select it. You should see an 8-character XM Radio ID in the display. (The XM Radio ID should also be on your MyFi’s package and under the battery.) Write the ID here: The XM Radio ID does not use the letters I, O, S, and F. XM subscription required for reception of XM service. Not available in Alaska or Hawaii. Activate your XM Satellite Radio service by contacting XM at http://activate.xmradio.com or by
Summary of the content on the page No. 8
go! Charge the battery and store some music 2go: Store and play back with a single button Your MyFi lets you store up to five hours of programming and play it back at a later time. Listen to XM wherever you are, including on an airplane, subway, or anywhere satellite coverage may be limited. While the battery is charging in the home stand, try storing some XM programming from XM’s lineup of over 130 channels! TO STORE: 1. Turn on your MyFi and select a channel. 2. Press the “2go” button. To
Summary of the content on the page No. 9
Summary of the content on the page No. 10
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. The Delphi XM MyFi Satellite Radio Receiver incorporates an FM transmitter and is therefore classified as an intentional transmitter. Changes or modifications to the unit not expressly approved by Delphi can void your author
