Summary of the content on the page No. 1
Remote Vehicle Control System
AX 901
Owner's Manual
Deluxe Vehicle Security and Remote
Start System with Two Way
Confirming LCD Remote Control
IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is
applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY
PRECAUTIONS may not apply. Please see your installing dealer for more information.
Summary of the content on the page No. 2
Table of Contents Using Your Remote Control ......................................................... 3 Arming the security system Pre-arm mode Disarming the security system Disabling/Enabling confirmation chirps Attempted intrusion identification Two stage door unlock* Activating the trunk release feature* Using Your Remote Control, continued .................................... 4 Turning on the vehicle’s headlights* Activating optional AUX 1* Activating optional AUX 2* Activating optional AUX
Summary of the content on the page No. 3
Using Your Remote Control Arming the Security System To arm the system, exit the vehicle, close all doors, then press the LOCK icon button on the remote control. The system will sound twice and the parking lights will flash twice, indicating the system is armed. The doors will also lock at this time (if equipped and connected). The status indicator (blue warning light on the dash) will blink steadily, once per second. To arm the system silently, press and hold the LOCK icon button for 1 se
Summary of the content on the page No. 4
Using Your Remote Control, continued Turning on the Vehicle’s Headlights (Optional) If this feature is enabled on your system, pressing and holding the LOCK icon button on the remote control for 2 seconds will turn on the vehicle’s headlights for 30 seconds. Activating Optional AUX 1 (Optional) If this feature is enabled on your system, pressing and holding the LOCK icon button and the TRUNK icon button on the remote control simultaneously will activate an optional feature. This feature can
Summary of the content on the page No. 5
Using Your Remote Vehicle Starter Remote Starting Your Vehicle To activate the remote vehicle start function, press and release the OPTION button on the remote control two (2) times within 2 seconds. The system will sound, the parking lights will flash 1 time and the system will check the vehicle to ensure it is safe to start, if all safety parameters are correct, the vehicle will start within 5 seconds (diesel vehicles will take longer). The vehicle’s parking lights will turn on (or flash d
Summary of the content on the page No. 6
Using Your Remote Vehicle Starter, continued Operating the 2 / 4 Hour Start Up Timer Mode The system has the ability to start the vehicle every 2 or 4 hours over a 48 hour period. This feature is especially useful in cold climates where the only means to keep the engine and engine fluids warm is to periodically start the engine. WARNING! Be certain that the vehicle is outdoors before using this or any remote starting device. A running engine produces dangerous carbon monoxide fumes which can
Summary of the content on the page No. 7
Using Your Remote Vehicle Starter, continued Operating the Daily Start Timer The system has the ability to start your vehicle based on a 24-hour countdown timer. To activate this feature, using the remote control press the LOCK and OPTION buttons simultaneously for 1 second. The system will begin counting sown from 24 hours, and start the vehicle when it reaches zero. This timer will only activate 1 time and will need to be reactivated for each 24 hour period. Remote Start Safety Features
Summary of the content on the page No. 8
Additional LCD Remote Control Functions Check Vehicle Status Press the LOCK icon button, TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control will display the system’s current status. Check Temperature Press the TRUNK icon button and OPTION button simultaneously for 1 second. The LCD remote control will display the vehicle’s interior temperature. LCD Remote Control Display Illumination Press and release the “F” button on the LCD remote control one time
Summary of the content on the page No. 9
LCD Remote Control Functions TRUNK TRUNK 9
Summary of the content on the page No. 10
LCD Remote Control Icons and Their Indications Security System Trigger Security System Armed (Hood or Trunk Entry) Security System Trigger Security System Disarmed (IT-s Sensor) Trunk Release Option Security System Activated Armed Silently Security System Remote Start Activated Disarmed Silently Security System Pre- LCD Remote Control Arm Mode with Vibrate Mode Door Open Security System Pre- Security System Trigger Arm Mode with (Door Entry) Hood or Trunk Open Remote Start Shutdown 10
Summary of the content on the page No. 11
Optional My Car Sound Feature The optional my car sound feature (Audiovox acc.. Speaker and labor required) allows you to program songs and tones to your system (i.e. Setting a different tone for Lock activation and unlock activation). Turning My Car Sound On: Press and release the TRUNK icon button on the remote control, then press and hold the LOCK icon button on the remote control within 2 seconds. The speaker will give notification that My Car Sound has be turned ON. Turning My Ca
Summary of the content on the page No. 12
Emergency Override Procedure If your transmitter is lost or disabled, it will be necessary use the emergency override button to turn the security system off. There are two types of emergency override procedures. Check with your installing dealer to find out what has been activated on your system. Standard Emergency Override Procedure 1. Enter the vehicle (the security system will trigger. 2. Turn the ignition key to the ON position. 3. Press and release the emergency override button (The
Summary of the content on the page No. 13
13
Summary of the content on the page No. 14
FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation. Warning! Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
