Summary of the content on the page No. 1
AviStart 4000 Owner’s Manual -FRONT COVER
Summary of the content on the page No. 2
I WARNING I ! Always exercise caution and common sense when operating your AviStart system. ! This product is intended for vehicles with fuel-injection and automatic transmissions only. NEVER attempt to remote start a vehicle with a manual (stick shift) transmission. Serious injury may occur with improper use. ! NEVER attempt to remote start the engine while anyone (including pets) is in the vehicle. ! NEVER attempt to remote start the engine while the vehicle is in an enclosed area without suff
Summary of the content on the page No. 3
Table of Contents AviStart 4000............................... . 2 Lifetime Warranty ............................ 2 Remote Controls ............................ 2 Stealth Coding Technology....................... 3 Electronic Scan Prevention (ESP).................... . 3 Instant Remote Control Code Deletion................. . 3 One-Step Remote Control Code Learning ............... . 3 Valet Switch.............................. . 3 Operating Your AviStart .......................... 4 Remote-Contr
Summary of the content on the page No. 4
AviStart 4000 Congratulations! You have just purchased the AviStart 4000, a keyless entry and remote engine starter system manufactured by Avital Technologies, Inc. You are about to experience the convenience and luxury of being able to start your vehicle engine from the comfort of your home, office, department store or other remote location. To benefit fully from the capabilities of your AviStart system, we encourage you to read the Owner's Manual thoroughly before using the system. If you shou
Summary of the content on the page No. 5
Stealth Coding Technology Stealth Coding™ technology offers the most advanced protection available against "code-grabbing" devices which thieves may use to record the digital code transmitted by your remote control. When you leave the area, thieves can then play back the code to unlock the doors and deactivate your system. But Avital’s remote controls with Stealth Coding™ randomly change the code every time you use them, and your system will not respond if any code is retransmitted. This techn
Summary of the content on the page No. 6
Operating Your AviStart Remote-Controlled Door Lock/Unlock* To Lock the Doors: Press the remote control LOCK button for 1-2 seconds. The doors will lock, the parking lights will flash twice and the dash mounted LED will flash slowly. If the Remote Lock Starter Disable feature was programmed ON, the vehicle starter motor will be disabled. (See the "Programming Table for System Features" on page 11.) * If your sys tem was in stalled with this door lock/un lock fea ture, all other door lock/unloc
Summary of the content on the page No. 7
To Activate: 1. Press the remote control LOCK button for 3-4 seconds. 2. The siren/horn will sound and the parking lights will flash. 3. If the ignition key is "OFF," the doors will unlock. If the ignition key is "ON," the doors will lock. To Deactivate: 1. Press the remote control LOCK button for 1-2 seconds. 2. The siren/horn will shut off and the parking lights will stop flashing. User-Programmable Starter Disable The AviStart can be programmed to electronically disable the vehicle starter ev
Summary of the content on the page No. 8
Remote Engine Start - Safety and Counter-Theft CAUTION: Be sure to read the "WARNING" bulletin on the inside I cover of this manual before attempting to operate remote start. Automatic Safety and Counter-Theft Features Before remote starting your engine, the AviStart system will automatically perform a safety check to ensure the following conditions have been met: • Brake pedal is not depressed. • Engine and ignition are turned off. • Hood is closed. After remote starting your engine, the AviSt
Summary of the content on the page No. 9
To Remote Start the Engine: 1. Press the remote control START button for 1-2 seconds, 10-15 minutes before you enter the vehicle (this will allow the climate control time to heat or cool the vehicle.) The parking lights will flash 2 times, the engine will start and the parking lights will remain on as a visual indication that the engine is running. AviStart will automatically lock the doors when the engine is remote started. If you have a diesel engine, the AviStart will be programmed to start
Summary of the content on the page No. 10
temperature every 2½ hours and will only start the engine during extreme cold temperatures. There are three temperature levels to choose from. (This feature is programmed OFF from the factory and must be programmed ON to operate. (See the "Programming Table for System Features"on page 11). To Activate: Press the remote control LOCK and START buttons at the same time. The parking lights will turn on for 3 seconds, shut off for 1 second and turn on for 3 seconds. This will be your visual indicati
Summary of the content on the page No. 11
To Deactivate: 1. When you return to the vehicle, press the remote control UNLOCK button for 1-2 seconds. The doors will unlock. 2. Enter the vehicle (do not touch the brake pedal), turn the ignition key to the "ON" position and then press the brake pedal. The parking lights will shut off and you will now be able to drive the vehicle. Protected Valet Mode You should place your system in Protected Valet Mode whenever your vehicle is being serviced by mechanics, car wash personnel or driven by v
Summary of the content on the page No. 12
User-Programmable Features All AviStart system and remote control programmable features are accomplished by turning the ignition key on (or starting the engine) and flicking the valet switch on and off a preset number of times. The AviStart also allows you to add new remote controls in one step, delete lost or stolen remote controls or rearrange the factory preset remote control functions. 1. Remove the system from Protected Valet Mode. Programming cannot be accessed while the system is in Prot
Summary of the content on the page No. 13
Programming Table for System Features Factory No. of Feature Secondary Action Setting Beeps Ignition-Controlled Wait 3 seconds, the piezo beeper will beep ON 6 Lock/Unlock once for OFF, twice for ON. Wait 3 seconds, the piezo beeper will beep Passive Starter Disable OFF 7 once for OFF, twice for ON. Remote Lock Starter Wait 3 seconds, the piezo beeper will beep ON 8 Disable once for OFF, twice for ON. Remote Start Run Time 20 Wait 3 seconds, the piezo beeper will beep 1 1 Minutes once for 30 min
Summary of the content on the page No. 14
Programming Table for Remote Controls Factory No. of Feature Secondary Action Setting Beeps LOCK Press the LOCK Button, the piezo beeper Remote Door Lock/Panic 15 Button will beep 1 time. UNLOCK Press the UNLOCK Button, the piezo beeper Remote Door Unlock 16 Button will beep 2 times. STAR T Press the START Button, the piezo beeper Remote Engine Start 17 Button will beep 3 times. TRUNK Press the TRUNK Button, the piezo beeper Remote Trunk Release 18 Button will beep 4 times. LOCK + Temperature-C
Summary of the content on the page No. 15
AviStart 4500 Owner’s Manual - Rev. A 0898
Summary of the content on the page No. 16
AviStart 4500 Owner’s Manual - Rev. A 0898
