Summary of the content on the page No. 1
318205221 (January 2012) Rev. A
All about the
Use & Care
of your Range
TABLE OF CONTENTS
Welcome & Congratulations ...................................2 Setting Oven Controls ..........................................17
Important Safety Instructions .................................3 Setting Keep Warm Drawer Control (If equipped) ..35
Features at a Glance ..............................................6 Care & Cleaning (Cleaning Chart) .........................36
Before Setting Surface Controls
Summary of the content on the page No. 2
WELCOME & CONGRATULATIONS Congratulations on your purchase of a new appliance! At Product Registration Electrolux Home Products, we are very proud of our Register Your Product product and are completely committed to providing you with the best service possible. Your satisfaction is our The PRODUCT number one priority. REGISTRATION CARD should be fi lled in completely, We know you’ll enjoy your new appliance and Thank You signed and returned to for choosing our product. We hope you consid
Summary of the content on the page No. 3
IMPORTANT SAFETY INSTRUCTIONS Read all instructions before using this appliance. • Remove all tape and packaging wrap before using Save these instructions for future reference. the appliance. Destroy the carton and plastic bags after unpacking the appliance. Never allow DEFINITIONS children to play with packaging material. Do not remove This is the safety alert symbol. It is used to alert the wiring label and other literature attached to the you to potential personal injury hazards. Obey
Summary of the content on the page No. 4
IMPORTANT SAFETY INSTRUCTIONS IMPORTANT CAUTION Do not attempt to operate the appliance during a Do not store items of interest to children in the power failure. If the power fails, always turn off cabinets above the appliance. Children climbing on the unit. If the unit is not turned off and the power the cooktop to reach items could be seriously injured. resumes, the appliance will not operate and an error message will be displayed. Once the power resumes, • Do not leave children alone.
Summary of the content on the page No. 5
IMPORTANT SAFETY INSTRUCTIONS due to the sudden change in temperature. Check the • Do not use a broiler pan without its insert. Broiler manufacturer’s recommendations for cooktop use. pan and grid allow dripping fat to drain and be kept away from the high heat of the broiler. • Do Not Use Decorative Surface Burner Covers. If an element is accidentally turned on, the decorative • Do not cover the broiler grid or oven bottom cover will become hot and possibly melt. Burns will with aluminum foi
Summary of the content on the page No. 6
FEATURES AT A GLANCE 1 2 3 4 5 6 Your built-in range Features: 1. Electronic oven control with kitchen timer. 2. Left front element control and electronic display. 3. Left rear element control and electronic display. 4. Right rear element control and electronic display. 5. Right front element control and electronic display. 6. Keep warm zone control. 7. Lower oven self-clean door latch. 14 8. Lower oven oven vent. 9. Broil element. 10. Self-cleaning oven interior. 11. Lower oven convection bake
Summary of the content on the page No. 7
BEFORE SETTING SURFACE CONTROLS The electronic surface element control (ESEC) The Electronic Surface Element Control (ESEC) feature includes digital display windows. The ESEC feature provides a numeric digital setting for the radiant surface element positions on the cooktop. These settings work the same way as normal knob setting indicators work Fig. 2 except the settings are displayed in digital windows. The available ESEC display settings The ESEC control provides various heat levels fro
Summary of the content on the page No. 8
BEFORE SETTING SURFACE CONTROLS Using proper cookware About the radiant surface elements The size and type of cookware used will infl uence the The element temperature rises gradually and evenly. setting needed for best cooking results. Be sure to follow As the temperature rises, the element will glow red. To the recommendations for using proper cookware as maintain the selected setting the element will cycle on and illustrated in Figures 1 & 2. off. The heating element retains enough heat to
Summary of the content on the page No. 9
SETTING SURFACE CONTROLS Single radiant surface elements The cooktop has 2 SINGLE radiant surface elements: the left rear position and the right rear position (Figure 1). To Operate the Single Radiant Surface Elements 1. Place correctly sized cookware on the radiant surface element. 2. Push in and turn the surface control knob in either direction to the desired setting (Figure 2). Start most cooking operations on a higher setting and then turn to a lower setting to fi nish cooking. Each surf
Summary of the content on the page No. 10
SETTING SURFACE CONTROLS Dual Surface Radiant Element The cooktop is equipped with 1 or 2 dual radiant surface elements located at the left front and the right front position (Figure 1). Symbols around the knob are used to indicate which coil of the dual radiant element will heat. The symbol indicates that only the inner coil will heat (Figure 2). The symbol indicates that both inner and outer coils will heat (Figure 3). You may switch from either coil setting at any time during cooking
Summary of the content on the page No. 11
SETTING SURFACE CONTROLS Keep warm zone CAUTION The purpose of the keep warm zone is to keep hot cooked foods at serving temperature. Use the keep warm The keep warm zone will not glow red when it is hot, feature to keep cooked foods hot such as: vegetables, but becomes hot enough to cause burns. Avoid placing gravies, casseroles, soups, stews, breads, pastries and hands on or near the keep warm zone until the keep oven-safe dinner plates. warm zone hot surface indicator light is OFF. Alw
Summary of the content on the page No. 12
BEFORE SETTING OVEN CONTROLS Installing Upper Oven Rack Supports Air circulation in the oven If using 1 rack, place in center of oven. If using multiple To install oven rack support, insert it into the two brackets racks, stagger cookware as shown. on the oven wall interior and push down as shown in the illustration to the right. For best air circulation and baking results allow 2-4" (5-10 cm) around the cookware for proper air circulation To remove the oven rack support for a self-clean cy
Summary of the content on the page No. 13
BEFORE SETTING OVEN CONTROLS Types of oven racks CAUTION Your built-in range may be equipped with one or more of the oven racks styles shown; Always use pot holders or oven mitts when adjusting the • Flat handle oven rack. oven racks. Wait until the oven has completely cooled if possible. Oven racks may be HOT and may cause burns. • Flat oven half rack. TM • Effortless oven rack. The Flat Oven Handle Rack has an handle to facilitate the sliding of the rack when large amount of foods weight
Summary of the content on the page No. 14
BEFORE SETTING OVEN CONTROLS The Effortless™ oven rack system Do Doo or r Ra Rac ck k Some models are equipped with a special oven rack co con nn ne ecto ctor r c co onne nnec ct to or r bra brac ck ke et t system that automatically partially extends the oven rack bra brac ck ke et t from the interior oven glides to assist in easier access to your food items. This feature works whenever the oven door is opened or closed. Fi Fig gu ur re e 2 2 To assemble the Effortless™ Oven Rack system: 1
Summary of the content on the page No. 15
SETTING OVEN CONTROLS Control pad features READ THE INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN. For satisfactory use of your oven, become familiar with the various features and functions of the oven as described below. Detailed instructions for each feature and function follow later in this Use & Care Guide. 20 1 2 5 6 7 8 9 10 11 19 21 3 4 12 13 14 15 16 17 18 1. Upper oven pad—Use to activate the upper oven 12. Convect convert pad (lower oven only)—Use to for cooking operation. convert a
Summary of the content on the page No. 16
SETTING OVEN CONTROLS MINIMUM AND MAXIMUM CONTROL PAD SETTINGS All of the features listed below have minimum and maximum time or temperature settings that may be entered into the control. An ENTRY acceptance beep will sound each time a control pad is touched (the acceptance beep on the Oven Lockout pad is delayed 3 seconds). An ENTRY ERROR tone (3 short beeps) will sound if the entry of the temperature or time is below the minimum or above the maximum settings for the feature. FEATURE MINIMUM
Summary of the content on the page No. 17
SETTING OVEN CONTROLS SETTING THE CLOCK SETTING CONTINUOUS BAKE OR 6 HOUR ENERGY SAVING The SET CLOCK pad is used to set the clock. The clock may The TIMER and SELF CLEAN pads control the Continuous be set for 12 or 24 hour time of day operation. The clock Bake or 6 Hour Energy Saving features. The oven control has has been preset at the factory for the 12 hour operation. a factory preset built-in 6 Hour Energy Saving feature that When the range is fi rst plugged in, or when the power wil
Summary of the content on the page No. 18
SETTING OVEN CONTROLS SETTING LOCKOUT FEATURE SETTING MINUTE TIMER . The TIMER ON OFF pad controls the Minute Timer feature. The pad controls the Lockout feature. The Lockout The Minute Timer serves as an extra timer in the kitchen feature automatically locks the oven doors, the control that will beep when the set time has run out. It does not panel and the cooktop. It does not disable the Minute start or stop cooking. The Minute Timer feature can be Timer or the interior oven lights. us
Summary of the content on the page No. 19
SETTING OVEN CONTROLS SETTING QUICK PREHEAT SETTING BAKE Use the quick preheat feature when using single rack The BAKE pad controls normal baking. If a rapid preheating baking to quickly heat the oven to bake temperatures. Use is preferred, refer to the QUICK PREHEAT feature for this feature only for standard baking. A reminder tone will instructions. The oven can be programmed to bake at any sound indicating when to place the food in the oven. temperature from 170°F to 550°F. Baking Tips: Wh
Summary of the content on the page No. 20
SETTING OVEN CONTROLS SETTING CONVECTION BAKE (lower oven 4 only) This mode of cooking enables you to obtain the best culinary results when baking with multiple pans and racks. Multiple 3 rack baking may slightly increase cook time for some foods but the overall result is time saved. Some food may cook faster and more evenly with Convection Bake. Convection 2 baking uses the three elements and a fan to circulate the oven’s heat evenly and continuously within the oven. 1 The oven can be pr
