Motorola MICOM 2E user manual

Summary of the content on the page No. 1

Motorola Micom 2E


Amateur General User Instructions

This unit is a commercial, industrial, military high frequency radio covering 1.7 to 30 mHz. These
general instructions are meant to be an aid in getting started and using the radio system. This is
essentially a computer controlled, software driven, radio system with multiple capabilities. The radio will
transmit SSB, AME(quivalent), and PLT (pilot). More detailed instructions can be found in the user
manual.


To Turn Unit O

Summary of the content on the page No. 2

Pressing the MORE button will change the parameters on the bottom row of the display window to PWR, MODE, AGC, and BW. Press PWR (power) (F1) to display choices of: Lo Med Hi Max (25, 62, 100, 125 w); 62 or 100 suggested. Press the button which corresponds to your choice. Press ENTER. Press MODE (F2) to select SSB; Press the button which corresponds to your choice. Press ENTER. Press AGC (F3) (automatic gain control) (if necessary), Slow suggested; Press AGC to cycle to your choic

Summary of the content on the page No. 3

At this time you should be able to operate the radio microphone, and volume controls as you normally would. If you need to change channels, you can use the UP and DOWN arrow keys if the channel is nearby, or simply re-enter the three digit channel number, and press ENTER in either case. PTT Release Beep If you are informed that when you end your transmission that an end of transmission tone or beep is occurring, you can remove that tone. Some people find this objectionable, others d