Motorola MIP 5000 user manual

Summary of the content on the page No. 1

MIP 5000 VoIP Radio Console
™
intelligence everywhere
Quick Installation Guide
Documentation
MIP 5000 VoIP Radio Console Installation CD
MIP 5000 VoIP Radio Console Installation and Configuration Manual
P/N: 6881013Y35
Prerequisites
MIP 5000 Online Self-Study Installation and Configuration Training Course
Multicast-Enabled Network Routers
This guide offers a broad overview of the installation procedures.
For more detailed information, consult the installation and
configuration manual.
RO-99-2124

Summary of the content on the page No. 2

Typical Configuration Jackbox Type Order # Basic Jackbox DDN9492A MIP 5000 VoIP Enhanced Jackbox DDN9493A Operator position MIP 5000 VoIP Operator position Radio Type Cable # MTR2000 2- or 4-wire leased line USB Headset Jackboxes MIP 5000 VoIP Operator/CSDM position Customer-provided Tone RJ45 Ethernet Gateway LAN/WAN USB Headset Jackboxes Local DB25 Gateway USB Headset Jackboxes Radio Type Cable # Digital Generic DDN6340A RJ45 Gateway M1225 SM50 DDN6338A SM120 CDM series Digital MaxTrac

Summary of the content on the page No. 3

Step 1. Preparation Important: Make sure there is a network access port in each location where a MIP 5000 Gateway is to be installed. An additional port is recommended for use by service personnel. !! 1. Consult with the network administrator to determine whether the network uses static or dynamic IP addressing. • If static, collect IP addresses to identify gateways and consoles. • If static, collect a netmask. For MIP 5000 gateways on different subnets, collec

Summary of the content on the page No. 4

Step 3. System Configuration 1. Use the CSDM to configure the system. • Select Configuration > System > Parameters and enter a Console Configuration Password • Important: Set Multicast Time-to-Live (TTL) equal to the number of subnet routers + 1. !! • Select Configuration > Console > Parameters to add a Console for each console in the system. • Enter MAC Address and Host Name or IP Address for each console, as recorded on the Dis

Summary of the content on the page No. 5

Step 5. Console Preparation and Software Installation Note: Repeat each task in this section for each console. 1. Install Motorola USB Jackboxes at each dispatch position, if included in your MIP 5000 system. If a Call Director interface is supported, use an Enhanced USB Jackbox for the operator headset. 2. Install any required audio devices at each dispatch position (console), such as headsets, speakers, and footswitches. 3. Insert the HASP key for this console into a USB port. Ig

Summary of the content on the page No. 6

Discovery Form Template (Best used when photocopied) Contact 1-800-221-7144 Motorola Inc. Motorola and the stylized M Logo are registered in the U.S. Patent and Corporate Office Trademark Office. All other product or service names are the property of 1301 E. Algonquin Road their respective owners. December, 2008 Schaumburg, IL 60196 USA © Motorola Inc. 2008. All rights reserved. 2215150G-3 Admin MAC Address Host Name or IP Addre