Summary of the content on the page No. 1
®
ViewSonic
PJD2121 - User Guide
SVGA DLP Projector
- Guide de l’utilisateur
- Bedienungsanleitung
- Guía del usuario
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
Model No.: VS12617
Summary of the content on the page No. 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Summary of the content on the page No. 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat. 9. Do not defeat the safety
Summary of the content on the page No. 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0.
Summary of the content on the page No. 5
Copyright Information © ® Copyright ViewSonic Corporation, 2009. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards Association.
Summary of the content on the page No. 6
Table of contents Menu operation.................................... 16 Introduction................................... 2 Projector features ........................................... 2 Description of each menu…………….. 17 Shipping contents............................................ 3 Maintenance ........................ 18 Projector exterior view..................................... 4 Care of the projector........................... 18 Controls and functions ...................................
Summary of the content on the page No. 7
Introduction Projector features The projector integrates high-performance optical engine projection and a user-friendly design to deliver high reliability and ease of use. The projector offers the following features. • Quick auto search speeding up the signal detecting process • Digital keystone correction to correct distorted images • Ability to display 16.7 million colors • Multi-language On-Screen Display (OSD) menus • Component HDTV compatibility (YPbPr) •ViewMatch for Accurate Col
Summary of the content on the page No. 8
Shipping contents Carefully unpack and verify that you have all of the items shown below. If any of these items are missing, please contact your place of purchase. Standard accessories The supplied accessories will be suitable for your region, and may differ from those illustrated. Optional accessories Replacement lamp 3 ViewSonic PJD2121
Summary of the content on the page No. 9
Projector exterior view 1. Focus ring 2. Projection lens 3. Lens cover 4. LED indicator 5. Adjuster foot 6. RGB (PC) signal input socket 7. Component video (YPbPr/YCbCr) signal input socket 8. Power DC inlet 9. Kensington anti-theft lock slot 10. Rear IR remote sensor 11. Lamp cover 4 ViewSonic PJD2121
Summary of the content on the page No. 10
Controls and functions Projector and remote control 1. Focus ring 1. POWER Adjusts the focus of the projected image. To turn on/off power. See "Fine-tuning the image size and clarity" on page 15 2. Arrow keys ( Left/Right/ Up /Down) for details. Selects the desired menu items and makes adjustments. 2. Keystone + 3. Enter Manually corrects distorted images resulting from an Selects an available OSD function setup mode. angled projection. 4. MENU/EXIT Turns on the On-Screen Display
Summary of the content on the page No. 11
Remote control effective range Infra-Red (IR) remote control sensor is located on the Back of the projector. The remote control must be held at an angle within 30 degrees perpendicular to the projector's IR remote control sensor to function correctly. The distance between the remote control and the sensor should not exceed 8 meters (~ 26 feet). Make sure that there are no obstacles between the remote control and the IR sensor on the projector that might obstruct the infra-red Replac
Summary of the content on the page No. 12
Positioning your projector Choosing a location Your room layout or personal preference will dictate which installation location you select. Take into consideration the size and position of your screen, the location of a suitable power outlet, as well as the location and distance between the projector and the rest of your equipment. Your projector is designed to be installed in the following installation locations: 1. Front Table Select this location with the projector placed near the flo
Summary of the content on the page No. 13
Connection When connecting a signal source to the projector, be sure to: 1 Turn all equipment off before making any connections. 2 Use the correct signal cables for each source. 3 Ensure the cables are firmly inserted. In the connections shown below, some cables may not be included with the projector (see "Shipping contents" on page 5. ) They are commercially available from electronics stores. Connecting a computer or monitor Connecting a computer The projector provides one VGA
Summary of the content on the page No. 14
Connecting a Component Video source device The projector provides one Component input socket that allows you to connect Component Video output from DVD player or other equipment. Make sure you have Component cable; this cable is not a standard part in shipping content. The final connection path should be like that shown in the following diagram: 9 ViewSonic PJD2121
Summary of the content on the page No. 15
Operation Starting up the projector 1. Plug the power cord into the projector and into a wall socket and power adaptor. Plug DC jack to projector. Check that the POWER indicator light on the projector flashes blue after power has been applied. 2. Remove the lens cap. If it is closed, it could become deformed due to the heat produced by the projection lamp. 3. Press POWER on the projector or remote control to start the projector. The POWER indicator light stays blue when the proj
Summary of the content on the page No. 16
To use the OSD menus, please set them to your familiar language first. 1. Press MENU on the remote control to turn on the OSD. 3. Press to select the language you need and press Press Enter to select. Enter. 2. Use to highlight the LANGUAGE, press Enter to 4. Press MENU on the remote control to leave and save select. the settings. Switching input signal The projector can be connected to multiple devices at the same time. However, it can only display one full screen at a t
Summary of the content on the page No. 17
If the projector is not placed on a flat surface or the screen and the projector are not perpendicular to each other, the projected image becomes trapezoidal. Do not look into the lens while the lamp is on. The strong light from the lamp may cause damage to your eyes. Be careful when you press the adjuster button as it is close to the exhaust vent where hot air comes from. Fine-tuning the image size and clarity Sharpen the image by rotating the focus ring. Correcting keys
Summary of the content on the page No. 18
screen with a 4:3 aspect ratio. This is most suitable for 4:3 images like computer monitors, standard definition TV and 4:3 aspect DVD movies, as it displays them without aspect alteration. 4 16:9: Scales an image so that it is displayed in the center of the screen with a 16:9 aspect ratio. This is most suitable for images which are already in a 16:9 aspect, like high definition TV, as it displays them without aspect alteration. Magnifying and searching for details If you need to z
Summary of the content on the page No. 19
Picture modes for different types of signals The picture modes available for different types of signals are listed below. 1 VGA (Default): Maximizes the brightness of the projected image. This mode is suitable for presentation. 2 ViewMatch mode: Switch in between high brightness performance or Accuracy color performance. 3 Video: Is appropriate for playing colorful movies, video clips from digital cameras or DVs through the PC input for best viewing in a blackened (little light) environ
Summary of the content on the page No. 20
Shutting down the projector I Press POWER and a confirmation message displays prompting you. If you don't respond in a few seconds, the message will disappear. Press POWER a second time. The POWER indicator light flashes RED, the projection lamp shuts down, and the fans will continue to run for approximately 60 seconds to cool down the projector. Disconnect the power cord from the wall socket if the projector will not be used in an extended period of time.
