Summary of the content on the page No. 1
®
ViewSonic
- User Guide
PJ551D/PJ551D-2
- Guide de l’utilisateur
DLP Projector
- Bedienungsanleitung
- Guía del usuario
- Guida dell’utente
- Guia do usuário
- Användarhandbok
- Käyttöopas
- Руководство пользователя
- 使用手冊 (繁體)
- 使用手冊 (簡體)
IMPORTANT: Please read this User Guide to obtain important information on
installing and using your product in a safe manner, as well as registering your
- 사용자 안내서
product for future service. Warranty information contained in this User Guide will
describ
Summary of the content on the page No. 2
Compliance Information FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable prote
Summary of the content on the page No. 3
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this unit near water. 6. Clean with a soft, dry cloth. If still not clean, see “Cleaning the Display” in this guide for further instructions. 7. Do not block any ventilation openings. Install the unit in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registe rs, stoves, o
Summary of the content on the page No. 4
Declaration of RoHS Compliance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum concentration values issued by the European Technical Adaptation Committee (TAC) as shown below: Proposed Maximum Substance Actual Concentration Concentration Lead (Pb) 0.1% < 0
Summary of the content on the page No. 5
Copyright Information © © Copyright ViewSonic Corporation, 2007. All rights reserved. Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. Microsoft, Windows, Windows NT, and the Windows logo are registered trademarks of Microsoft Corporation in the United States and other countries. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation. VESA is a registered trademark of the Video Electronics Standards As
Summary of the content on the page No. 6
Contents Introduction ......................................................................1 Projector Features...................................................................................................1 Package Contents...................................................................................................2 Projector Overview..................................................................................................3 Using the Product .............
Summary of the content on the page No. 7
Introduction Projector Features The projector integrates high-performance optical engine projection and a user - friendly design to deliver high reliability and ease of use. The projector offers the following features: ® Single chip 0.55" Texas Instruments DLP technology XGA (1024 x 768 pixels) Auto image re-sizing (Auto-Sync.) to 1024 x 768 full screen with scaling compression compatibility for VGA, SVGA, XGA and SXGA* ® Compatibility with Macintosh computers Compatibility with NTSC, P
Summary of the content on the page No. 8
Package Contents When you unpack the projector, make sure you have all these components: Projector with Lens Cap AC Power Cord VGA Cable (D-SUB to D-SUB) Remote Control (IR) User’s Manual Quick Start Guide Save the original shipping carton and packing material; they will comein handy if you ever to ship your unit. For maximum protection, repack your unit as it was originally packed at the factory. Accessories and components may vary by retailer and region. ViewSonic
Summary of the content on the page No. 9
Projector Overview Front View 11 10 9 8 7 1 2 3 4 5 6 Lens cap AC power socket 1 7 Elevator button Control panel 2 8 Lens cap strap Zoom ring 3 9 Projection lens Focus ring 4 10 Front IR remote control sensor Lamp cover 5 11 Ventilation holes 6 ViewSonic 3 PJ551D
Summary of the content on the page No. 10
Rear View 1 2 3 4 Connection ports 1 Kensington lock 2 Rear IR remote control sensor 3 Ventilation holes 4 Bottom View 1 2 3 Elevator foot 1 Ceiling mount 2 Tilt-adjustment foot 3 This projector can be used with a ceiling mount for support. The ceiling mount is not included in the package. ViewSonic 4 PJ551D
Summary of the content on the page No. 11
Using the Product Control Panel LED 1 2 3 4 8 7 6 5 Lamp (Lamp LED indicator) 1 Refer to “LED Indicator Messages”. Temp (Temperature LED indicator) 2 Refer to “LED Indicator Messages”. Button Function Four directional buttons 3 Use four directional buttons to select items or make adjustments to your selection. Enter 4 Enter to sub-menu and confirm the menu selection. Activate in Color Setting, Lamp Counter Reset and Factory Default menu operations. Resync 5 Resynchronize the projector to the i
Summary of the content on the page No. 12
Connection Ports 1 2 3 4 5 Computer Out(PJ551D-2) 1 Connect to a computer display, etc. Computer In 2 Connect image input signal (analog RGB or component) to this jack. S-Video 3 Connect S-Video output from video equipment to this jack. Video 4 Connect composite video output from video equipment to this jack. SERVICE 5 This connector is for firmware update. ViewSonic 6 PJ551D
Summary of the content on the page No. 13
Remote Control Power 1 Turn the projector on or off. Four directional buttons 2 Use four directional buttons to select items or make adjustments to your selection. Menu 3 Display or exit the on-screen display menus. Enter 4 Confirm the selection. Keystone / 5 Adjust image distortion caused by tilting the projector. Page / Page (Computer 6 mode only) This button has same function as Page Up / Page Down button in a PC keyboard. This function is only available when the projector is connected to
Summary of the content on the page No. 14
For the first time use: Remove the transparent insulation tape by pulling it before use. Catch Battery holder For battery change: 1. Push the catch to the right and remove the battery holder. 2. Remove the old Lithium coin cell and install new one (CR2025). Ensure that the side with the mark “+” is up. 3. Push the battery holder back into the remote control until you feel a click. Keep the battery out of the reach of children. There is a danger of death by accidentally swallowing the battery
Summary of the content on the page No. 15
Auto Blank Freeze ViewMatch Keystone Keystone Source Page Page Remote Control Operation Point the remote control at the infrared remote sensor and press a button. Operating the projector from the front Operating the projector from the rear The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor. Operate the remote control from a position where the remote sensor is visible. Do not drop the remote control or jolt
Summary of the content on the page No. 16
Installation Connecting the Projector VGA Cable (D-Sub to D-Sub) S-Video Cable 1 4 USB Cable Composite Video Cable 2 5 VGA (D-Sub) to HDTV (RCA) Cable 3 Laptop type Desktop type 1 1 2 3 4 5 When connecting cable, power cords of both a projector and external equipment should be disconnected from AC outlet. The figure above is a sample connection. This does not mean that all of these devices can or must be connected simultaneously. The cables that come with the projector may differ from the a
Summary of the content on the page No. 17
Powering On/Off the Projector Powering On the Projector: 1. Remove the projector lens cap. 2. Complete the AC power cord and peripheral signal cable(s) connections. 3. Press button to turn on the projector. The projector takes a minute or so to warm up. 4. Turn on your source (computer, notebook, DVD, etc.). The projector automatically detects your source. If you are connecting multiple sources to the projector simultaneously, press the Source button. Warning: Remove the lens cap first befor
Summary of the content on the page No. 18
Adjusting the Projector Adjusting the Projector Height Tilt-adjustment foot Elevator foot Elevator button The projector is equipped with an elevator foot to adjust the image height. To raise or lower the image: 1. To raise or lower the image, press the elevator button and raise or lower the front of the projector. Release the button to lock the adjustment. 2. To level the image on the screen, turn the tilt-adjustment foot to fine-tune the height. To avoid damaging the projector, make sure that
Summary of the content on the page No. 19
Adjusting Projection Image Size Refer to the graphic and table below to determine the screen size and projection distance. 249.80 124.90 227.83 74.94 49.96 113.92 30.08 68.35 45.57 27.34 1.2m (Min.) 2.0m 3.0m 5.0m 10.0m(Max.) Projection Distance Screen Size (for 4:3 aspect ratio diagonal length) (meters) Wide (inches) Tele (inches) 1.2 30.08 27.34 2 49.96 45.57 3 74.94 68.35 5 124.90 113.92 10 249.80 227.83 Position the projector in a horizontal position; other positions can cause heat build-
Summary of the content on the page No. 20
Menu Operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. High Filter Mode ViewSonic 14 PJ551D
