Summary of the content on the page No. 1
ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS
XV-Z3000U
XV-Z3000U
PROJECTOR
OPERATION MANUAL
PROJECTEUR
MODE D’EMPLOI
PROYECTOR
MANUAL DE MANEJO
PROJETOR
MANUAL DE OPERAÇÃO
Printed in China
Imprimé en Chine
Impreso en China
Impresso na China
TINS-C226WJN1
06P02-CH-NG
XV-Z3000_US_EN__cover 1 06.2.9, 10:42 AM
Summary of the content on the page No. 2
ENGLISH Before using the projector, please read this operation manual carefully. Introduction IMPORTANT • For your assistance in reporting the loss Model No.: XV-Z3000U or theft of your Projector, please record the Serial Number located on the bottom of the projector and retain this information. Serial No.: • Before recycling the packaging, please ensure that you have checked the con- tents of the carton thoroughly against the list of “Supplied accessories” on page 10. There are two important re
Summary of the content on the page No. 3
WARNING: The cooling fan in this projector continues to run for about 90 seconds after the projector enters standby mode. During normal operation, when putting the projector into standby mode always use the STANDBY/ON button on the projector or the STANDBY button on the remote control. Ensure the cooling fan has stopped before disconnecting the power cord. DURING NORMAL OPERATION, NEVER TURN THE PROJECTOR OFF BY DISCONNECTING THE POWER CORD. FAILURE TO OBSERVE THIS WILL RESULT IN PREMATURE LAMP
Summary of the content on the page No. 4
Introduction Useful Features How to Read this Operation Manual The specifications are slightly different, depending on the model. However, you can connect and operate all models in the same manner. • In this operation manual, the illustration and the screen display are simplified for explanation, and may differ slightly from the actual display. Using the Menu Screen ENTER button Adjustment buttons (P/R/O/Q) Adjustment buttons (P/R/O/Q) MENU button MENU button ENTER button RETURN button • Press
Summary of the content on the page No. 5
Contents Preparing Introduction Setup How to Read this Operation Manual .... 3 Setting up the Projector ...................... 18 Setting up the Projector ....................... 18 Contents ............................................... 4 Standard Setup (Front Projection) ....... 18 IMPORTANT SAFEGUARDS ............... 6 Ceiling-mount Setup ............................ 18 Accessories ........................................ 10 Projection (PRJ) Mode ......................... 19 Part Names and F
Summary of the content on the page No. 6
Introduction Reference Appendix Connecting Pin Assignments ............. 57 RS-232C Specifications and Command Maintenance ....................................... 51 Settings ............................................ 58 Maintenance Indicators ...................... 52 Computer Compatibility Chart ............ 59 Regarding the Lamp ........................... 54 Troubleshooting .................................. 60 Lamp ..................................................... 54 Service Informati
Summary of the content on the page No. 7
IMPORTANT SAFEGUARDS CAUTION: Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated in this product, observe the following basic rules for its installation, use and servicing. 1. R
Summary of the content on the page No. 8
Introduction 15. Overloading 19. Replacement Parts Do not overload wall outlets, extension cords, or When replacement parts are required, be sure integral convenience receptacles as this can the service technician has used replacement result in a risk of fire or electric shock. parts specified by the manufacturer or have the same characteristics as the original part. 16. Object and Liquid Entry Unauthorized substitutions may result in fire, Never push objects of any kind into this product electr
Summary of the content on the page No. 9
Observe the following safeguards when setting up your projector. Caution concerning the lamp unit When using the projector in high-altitude Potential hazard of glass par- areas such as mountains (at altitudes of ticles if lamp ruptures. In approximately 4,900 feet (1,500 meters) case of lamp rupture, contact or more) your nearest Authorized When you use the projector in high-altitude SharpVision Service Center areas with thin air, set “Fan Mode” to “High”. or Dealer for replacement. Neglecti
Summary of the content on the page No. 10
Introduction When turning off the projector, the cooling fan Using the projector in other countries runs to decrease the internal temperature for The power supply voltage and the shape of a while. Unplug the power cord after the cool- the plug may vary depending on the region ing fan stops. The period the cooling fan runs or country you are using the projector in. will vary, depending on the circumstances and When using the projector overseas, be sure the internal temperature. to use an appr
Summary of the content on the page No. 11
Accessories Supplied accessories Remote control Two R-03 batteries Lens cap (attached) RRMCGA444WJSA (“AAA” size, UM/SUM-4, CCAPHA024WJSA HP-16 or similar) • Operation manual Power cord for U.S. and Canada, etc. (6' (1.8 m)) QACCDA007WJPZ Optional accessories Lamp unit AN-100LP 57 DIN-D-sub RS-232C adaptor (5 /64o (15 cm)) AN-A1RS 3 RCA to 15-pin D-sub cable (10' (3.0 m)) AN-C3CP2 Note • Some of the optional accessories may not be available depending on the region. Please check with your n
Summary of the content on the page No. 12
Introduction Part Names and Functions Numbers in Z refer to the main pages in this operation manual where the topic is explained. Projector Top View Power Lamp indicator 28, 52 28, 52 indicator STANDBY/ON 28 button For turning the Temperature warning 52 power on and indicator putting the projector into INPUT buttons (P/R) standby mode. 29 For switching input mode 1, 2, 3, 4, 5 or 6. ENTER button 41 For setting items selected or adjusted on MENU button the menu. 41 For displaying RESIZE button ad
Summary of the content on the page No. 13
Part Names and Functions (Continued) Numbers in Z refer to the main pages in this operation manual where the topic is explained. Rear View 51 Exhaust vent Intake vent 51 Remote control 15 sensor (rear) AC socket 28 Kensington Connect the 13 Security Standard supplied Power cord. connector Rear adjustment 31 foot Terminals 65 4 1 23 7 Terminal Description Page INPUT 1, 2 terminal 1 Connecting video equipment with component output terminal (DVD 23 player, DTV decoder, DVD recorder with hard disc,
Summary of the content on the page No. 14
Introduction Numbers in Z refer to the main pages in this operation manual where the topic is explained. ON button 28 For turning the power on. INPUT 1, 2, 3, 4, 5 and 6 29 STANDBY button 29 buttons For putting the For switching to the projector into the respective input modes. standby mode. MENU button 41 KEYSTONE button 32 For displaying adjustment For entering the and setting screens. Keystone Correction mode. Adjustment buttons 41 (P/R/O/Q) RETURN button 41 • For selecting menu items. For re
Summary of the content on the page No. 15
Part Names and Functions (Continued) Inserting the Batteries Press the P mark on the cover and slide it 1 in the direction of the arrow. Insert the batteries. 2 • Insert the batteries making sure the polarities correctly match the m and n marks inside the battery compartment. Attach the cover and slide it until it clicks 3 into place. Incorrect use of the batteries may cause them to leak or explode. Please follow the precautions below. Caution • Danger of explosion if battery is incorrectly repl
Summary of the content on the page No. 16
Introduction Usable Range The remote control can be used to control the projector within the ranges shown in the illustration. Remote control sensor (front) 30° Remote Remote control sensor (rear) control signal transmitters 23n (7 m) 30° 30° Remote control Remote control signal transmitters 23n (7 m) 30° Remote control Note • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ depending on the screen mater
Summary of the content on the page No. 17
Quick Start This section shows the basic operation (projector connecting with the video equipment). For details, see the page described below for each step. Setup and Projection In this section, connection of the projector and the video equipment is explained using one ex- ample. 3 STANDBY/ON STANDBY button 8 8 button ON button 3 INPUT buttons 5 INPUT 4 button 5 KEYSTONE button 7 Adjustment buttons 7 (P/R/O/Q) ENTER button 7 Focus ring 6 Zoom ring 6 HEIGHT 6 ADJUST lever _P. 18 1. Place the proj
Summary of the content on the page No. 18
Quick Start 4. Turn the video equipment on and start playback _P. 29 5. Select the INPUT mode Select the “INPUT 4” using the INPUT buttons on the projector or the INPUT 4 button on the remote control. On the On the remote On-screen display projector control INPUT 4 • When pressing the INPUT buttons on the projector, input mode switches in the following INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 INPUT6 order: • Pressing the INPUT buttons on the remote control also allows you to switch the input mode. 6.
Summary of the content on the page No. 19
Setting up the Projector Setting up the Projector For optimal image quality, position the projector perpendicular to the screen with the projector’s feet flat and level. Doing so will eliminate the need for Keystone correction and provide the best image quality. Standard Setup (Front Projection) Place the projector at the required distance from the screen according to the desired picture size. (See page 20.) Example of standard setup Side View Screen H Lens center L Note • Refer to page 20 for
Summary of the content on the page No. 20
Setup 261"×147" 87"×49" 70"×39" 52"×29" 174"×98" Projection (PRJ) Mode The projector can use any of the 4 projection modes, shown in the diagram below. Select the mode most appropriate for the projection setting in use. (You can set the PRJ Mode in “Options2” menu. See page 49.) Table mounted, front projection Ceiling mounted, front projection Menu item “Front” Menu item “Ceiling + Front” Table mounted, rear projection Ceiling mounted, rear projection (with a translucent screen) (wit
