Summary of the content on the page No. 1
OWNER’S OPERATING MANUAL
CL-510 / CL-510LT
Summary of the content on the page No. 2
Limited Warranty Congratulations on your purchase of a Runco video product and welcome to the Runco family! We believe Runco produces “The World’s Finest Home Theater Products”. With proper installation, setup and care, you should enjoy many years of unparalleled video performance. Please read this consumerprotection plan carefully and retain it with your other important documents. This is a LIMITED WARRANTY as defined by the U.S. Consumer Product Warranty and Federal Trade Commission Improv
Summary of the content on the page No. 3
IMPORTANT: WARRANTY REGISTRATION: Please fill out and mail your warranty registration card. It is imperative that Runco knows how to reach you promptly if we should discover a safety problem or product update for which you must be notified. TO OBTAIN SERVICE, CONTACT YOUR RUNCO DEALER: Repairs made under the terms of the Limited Warranty covering your Runco International video product will be performed at the location of the product, during usual working hours, providing location of product is
Summary of the content on the page No. 4
Runco CL-510/ CL-510LT User’s Manual Runco CL-510/ CL-510LT Video Projector User’s Manual Thank you for your purchase of this quality Runco video projector! It has been designed to provide you with the quality of video that is expected in a home theater. For the best performance, please read this manual carefully as it is your guide through the menus and operation. WARNING This symbol is intended to alert the user to the presence of CAUTION uninsulated " dangerous voltage " within the prod
Summary of the content on the page No. 5
Runco CL-510/ CL-510LT User’s Manual Table of Contents WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Projector Exterior View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Front / Upper Side . . . .
Summary of the content on the page No. 6
Runco CL-510/ CL-510LT User’s Manual 1. Overview Features ■ Runco Engineered, Gen 3 Technology. TM ■ Native 16x9 Aspect Ratio DMD 12 degree mirrors with dark metal process ■ High Contrast and Picture Quality 9 point white balancing system ■ Dynamic Performance and Rich Gray-scale 6-segment 5x color wheel and precision gray scale tracking ■ TIR (Total Internal Reflection) Prism Light engine with custom optics featuring an elliptical aperture for highest performance. ■ Wide Variety of Inputs This
Summary of the content on the page No. 7
Runco CL-510/ CL-510LT User’s Manual Projector Exterior View ❚ Front / Upper Side 1. Front Lamp Cover 6. Focus Ring and Zoom Ring Access Adjusts the focus and zoom of image. Remove this cover when replacing the lamp. (See page 27.) 7. Power LED and Lamp LED 2. Projection Lens Show the status of power and lamp. For more details, see "Control Panel" on page 5. 3. Front IR Sensor 8. Top IR Sensor 4. Ventilation Holes (intake) 9. Runco Logo (Can be turned off, see "Options" 5. Ventilation Holes
Summary of the content on the page No. 8
Runco CL-510/ CL-510LT User’s Manual Controls and Functions ❚ Control Panel 1. POWER LED Indicate power status ■ Orange when the AC power cord is plugged into the wall outlet (standby mode). Once in the standby mode, you can turn on the projector by pressing the ON key on the remote control for ONE second. ■ Green when the power is turned on (operational mode). ■ Flashing Orange for the first 45 seconds after power-up indicating that the lamp is warming up. ■ Flashing Green for 90 seconds
Summary of the content on the page No. 9
Runco CL-510/ CL-510LT User’s Manual ❚ Connector Panel 1. Video (RCA Jack) Composite video signal input. 2. S-Video (mini DIN 4-pin) Y/C (S-video) signal input 3. Component (RCA Jacks) 480i Component (Y/CB/CR) video signal input 4. RGB/ HDTV (BNC) or Progressive Scan DVD players DTV Y/PB/PR or DTV RGB video signal input. 5. DVI/ HDCP Digital/ Analog signal input. 6. RS-232C (RJ-11 Jack) RS-232C control signal input. 7. 12v Trigger (mini jack with the diameter of 5.5 mm outside and 2.5 mm inside
Summary of the content on the page No. 10
Runco CL-510/ CL-510LT User’s Manual ❚ Remote Control ON Hold down this button for ONE second to turn on the unit. OFF Press this button to turn off the unit. Anamorphic For 16: 9 DVDs. M1, M2, M3, Default Recall video memory sequentially 4 X 3 (see "Selecting Video Memory" on The input signal will be scaled to page 18) fit 4: 3 display mode in the center of screen. LPos+, LPos- Letterbox position Color Adjust color intensity Letterbox Letterbox mode. Image in letter- Brightness box for
Summary of the content on the page No. 11
Runco CL-510/ CL-510LT User’s Manual Arrow ( , , , ) Use to select the menu or to make various adjustments. Enter Enter the setting of items in the menu. Picture Access the Picture Setting menu (see "Picture Quality Adjustments" on page 23) Info Access the projector information Exit Exit and save the setting(s) of items in the menu. Menu Turns on/off the on-screen display menu. Video Composite video signal input S-Video S-Video signal input Comp PBP (Picture by Picture) Component
Summary of the content on the page No. 12
Runco CL-510/ CL-510LT User’s Manual 2. Installation Remote Control Push forward on the tap and lift to open the cover. Install the two AAA batteries with the correct polarity, then close the cover. Notes on Batteries ■ Make sure that the battery polarities are correct when installing the batteries. ■ Do not mix an old battery with a new one or different types of batteries. ■ If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.
Summary of the content on the page No. 13
Runco CL-510/ CL-510LT User’s Manual ❚ Adjust the Lens Zoom/Focus ring Adjust the projected image size you need with the zoom ring on the lens. To focus the image, rotate the focus ring on the lens. Focus Zoom in Zoom out ❚ Adjust the height There are 4 screw adjusters on the bottom of this unit. You can adjust the height or projection angle of this unit by using these adjusters. 10 2. Installation
Summary of the content on the page No. 14
Runco CL-510/ CL-510LT User’s Manual Installation For CL-510 (With 1.75 - 2.00 Lens) Ceiling Screen __________ (H) x __________ (W) B) THROW DISTANCE: CL-510 16 x 9 Screens: Minimum: (screen width x 1.75) = __________ inches Maximum: (screen width x 2.00) = __________ inches C) VERTICAL OFFSET: Screen width x 0.12 = _________ inches from the center of the lens. Floor 2. Installation 11
Summary of the content on the page No. 15
Runco CL-510/ CL-510LT User’s Manual Throw Distance Chart For CL-510 (With 1.75 - 2.00 Lens) CL-510 @ 1024 x 576 Min Throw Max Throw Vertical Offset Screen Height Screen Width Distance Distance Position 40.5 72 126.00 144.00 8.64 43 77 134.75 154.00 9.24 45 80 140.00 160.00 9.60 47 84 146.41 167.32 10.04 49 87 152.25 174.00 10.44 50 89 155.75 178.00 10.68 51.5 92 161.00 184.00 11.04 52 93 162.75 186.00 11.16 54 96 168.00 192.00 11.52 56 100 175.00 200.00 12.00 58 103 180.25 206.00 12.36 58.
Summary of the content on the page No. 16
Runco CL-510/ CL-510LT User’s Manual Installation For CL-510LT (With 2.30 - 3.00 Lens) Ceiling Screen __________ (H) x __________ (W) B) THROW DISTANCE: CL-510LT 16 x 9 Screens: Minimum: (screen width x 2.30) = __________ inches Maximum: (screen width x 3.00) = __________ inches C) VERTICAL OFFSET: Screen width x 0.10 = _________ inches from the center of the lens. Floor 2. Installation 13
Summary of the content on the page No. 17
Runco CL-510/ CL-510LT User’s Manual Throw Distance Chart For CL-510LT (With 2.30 - 3.00 Lens) CL-510LT @ 1280 x 720 Min Throw Max Throw Vertical Offset Screen Height Screen Width Distance Distance Position 40.5 72 165.60 216.00 7.20 43 77 177.10 231.00 7.70 45 80 184.00 240.00 8.00 47 84 192.24 250.98 8.37 49 87 200.10 261.00 8.70 50 89 204.70 267.00 8.90 51.5 92 211.60 276.00 9.20 52 93 213.90 279.00 9.30 54 96 220.80 288.00 9.60 56 100 230.00 300.00 10.00 58 103 236.90 309.00 10.30 58.5
Summary of the content on the page No. 18
Runco CL-510/ CL-510LT User’s Manual 3. Connecting When connecting, make sure to: 1. Turn off all equipment before making any connections. 2. Use the correct signal cables for each source. 3. Ensure the cables are firmly connected. 4. Connect all audio signals to external speakers. This projector is not equipped with speakers. Connecting Video Inputs ❚ Video / S-Video / Component (Interlaced Video) DVD Player 3. Connecting 15
Summary of the content on the page No. 19
Runco CL-510/ CL-510LT User’s Manual ❚ Progressive Component (DTV Y/PB/PR) DTV Source ❚ RGBHV (DTV RGB) DTV Source The RGB BNC input supports two kinds of HDTV formats: Progressive component (DTV Y/PB/PR) and DTV RGB. The unit will detect the resolution automatically. 16 3. Connecting
Summary of the content on the page No. 20
Runco CL-510/ CL-510LT User’s Manual Connecting a Computer (DVI/ HDCP) PC or Notebook This unit is compatible with the following computer resoultions: 1280x720, 1024x768, 800x600, 640x480. 3. Connecting 17
