Summary of the content on the page No. 1
Summary of the content on the page No. 2
To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property. | Power Related | Installation Related | Cleaning and Use Related | [The images here are for reference only, and are not applic
Summary of the content on the page No. 3
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. There is a danger of electric shock or fire. Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it. There is a danger of fire. Unplug the power plug before cleaning the product. There is a danger of electric shock or fire. | Power Related | Installation Related | Cleanin
Summary of the content on the page No. 4
(rainwater), or in a vehicle. There is a danger of electric shock or fire. Do not install the product in locations with poor ventilation s uch as a bookshelf, closet, etc. An increase in the internal temperature may cause a fire. Do not install on an unstable location, or on a stand smaller t han the product. Make sure to keep the product out of the reach of children. The product may fall and cause personal injury. In case of thunder/lightning, disconnect the power cord fr
Summary of the content on the page No. 5
Do not insert metal items, such as chopsticks, steel wire, gimlets, or inflammable objects such as matches or paper into the product through the ventilating openings and the PC/Video and power terminals. This may cause electric shock or fire. If water or an alien substance enters the product, turn the pro duct off, disconnect the power cord from a wall outlet and contact a Service Center. Do not disassemble, or attempt to fix or modify the product. When the product requires
Summary of the content on the page No. 6
If the power plug pin or jack is exposed to dust, water or alien substances, clean it thoroughly. There is a danger of electric shock or fire. When cleaning the product, disconnect the power cord and wipe the product using a soft dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinner s, insecticide, air freshener, lubricant or detergent. When not using the product for an extended period of time, disc onnect the power plug. Otherwise, this may cause heat em
Summary of the content on the page No. 7
their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial wastes for disposal. Correct disposal of batteries in this product - Europe only (Applicable in the European Union and other European countries with separate battery return systems.) This marking on t
Summary of the content on the page No. 8
| Product Features | Product Views | Remote Control | Product Specifications | High Mobility Design - Small Size. - Lightweight. Next Generation Backlight Light Source, LED Lamp - Effective energy saving by using low voltage. - Semi-permanent long lifetime guaranteed. | Product Features | Product Views | Remote Control | Product Specifications | Front/Upper Side 1. Indicators 6. Move/Select/Volume button
Summary of the content on the page No. 9
- TEMP (Red LED) / : Use this button to move to or select an item within a menu. - STAND BY (Blue LED) ※ Refer to the LED Indications. : Use this button to adjust the volume. 2. Lens cover 7. MENU Button Used to display Menu Screen. 3-1. Adjustable Feet You can adjust the screen position by moving 8. SOURCE Button the adjustable feet up and down. Use this button to select the external device signal. 3-2. The holes to hold the tripod 9. POWER( ) Butto
Summary of the content on the page No. 10
LED Indications :Light is On :Light is Blinking :Light is Off STAND BY TEMP Information This state occurs when power is supplied to the projector normally after the POWER button on the projector or the remote control has been pressed. - This state appears when the projector is preparing an operatio n after the POWER button on the projector or the remote control has been pressed. - The POWER button is pressed to turn off the projector, and the cooling system is in operation to c
Summary of the content on the page No. 11
1. VIDEO IN Input port 5. Kensington Lock 2. VIDEO/PC AUDIO IN Input ports 6. PC IN Input port 3. Remote Control Signal Receiver 7. SERVICE Input port 4. POWER Input port 8. Headphone Input port | Product Features | Product Views | Remote Control | Product Specifications | 1. POWER Button ( ) 2. SOURCE Button 3. MENU Button( ) 4. Move( )/ ( )Button 5. VERTICAL KEYSTONE Button ( ) 6. INSTALL Button 7. STANDARD Button 8. P.SIZE Button 9
Summary of the content on the page No. 12
15. MONITOR Button 16. P.MODE Button 17. MOVIE Button 1. POWER Button ( ) Use this button for turning the product on and off. 2. SOURCE Button Used to check or select the connection status of external devic es. 3. MENU Button( ) Used to display Menu Screen. 4. Move( )/ ( )Button Used to move to or select each menu item. 5. VERTICAL KEYSTONE Button ( ) Use this when the screen is displayed in a trapezoid shape. 6. INSTALL Button Used to flip or reverse the projected i
Summary of the content on the page No. 13
Design and specifications of the product may be modified without prior notice for better performance. Specifications Model SP-P400 Size 13.97 mm/0.55 inch Panel Resolution 800 x 600 (SVGA) Light Source LED Power Consumption 53 W Power Voltage DC 14V 4A Dimensions (W×H×D) 147.5 x 64.5 x 145.5 mm / 5.8 x 2.5 x 5.7 inch Weight 900 g / 2.0 lb Brightness 150 ANSI Contrast 1000:1 Key Features Screen Size (Diagonal) 20” to 80" Projection Range 0.68 - 2.83m Keystone
Summary of the content on the page No. 14
MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- VESA, 640 x 350 37.861 85.080 31.500 +/- VESA, 640 x 400 37.861 85.080 31.500 +/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 640 x 480 43.269 85.008 36.000 -/- VESA, 720 x 400 37.927 85.039 35.500 -/+ VESA, 800 x 600 35.156 56.250 36.000 +/+ VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 48.077 72.188 50.000 +/+ VESA, 800 x 600 46.875 75.000 49.500 +/+ VESA, 800
Summary of the content on the page No. 15
| Basic Settings | Connecting the Power | Connecting to video equipment | Installing the Projector Install the projector so that the beam from the projector is perpendicular to the screen. Place the projector so that the lens is at the center of the sc reen. If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displ
Summary of the content on the page No. 16
Focus Ring Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance), the focus cannot be adjusted correctly. Leveling with Adjustable Feet For level placing of the project or, adjust the Adjustable Feet of the projector. You may adjust the level of the projector up to 3 degrees. Depending on the position of the projector, Keystone distortion of
Summary of the content on the page No. 17
Setting up the PC Environment - Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop and click on [Properties]. tab will appear. 2. Click on [Settings] tab and set the by referring to described in the display mode table supported by this projector. You do not have to change setup. 3. Press the [Advanced] button. Another property wind
Summary of the content on the page No. 18
Process might vary depending on the type of computers or Window s versions. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This appliance supports up to 32 bits per pixel in Color quality when it is used as a PC monitor. Projected images may differ from the monitor depending on monitor manufacture or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may be
Summary of the content on the page No. 19
- Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. - Connect the [ ] input port of the projector to the Audio (L), Audio (R) output ports of the external device, such as a DVD, VCR or camcorder using an audio cable. When the connections are all completed, connect both power cabl es of the projector and the DVD, VCR, or camcorder. Using the Projector Turn on the projector, press the [SOURCE] button
Summary of the content on the page No. 20
Connect [PC IN] port on the rear side of the projector to the m onitor output port of the PC using a PC video cable. When connections are all completed, connect both power codes of the projector and the PC. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. This product supports plug and p lay and therefore, if you use Window XP you do not need to setup the driver on your PC. Using the Projector Turn on the pr
