Knoll Systems HD110 user manual

Summary of the content on the page No. 1

HD110 Command Line Interface



Purpose
This specification will define the serial command line streams for controlling a Knöll
projector through the RS232 connector to the projector. These commands are intended
to provide a simple secondary set of controls to the projector through what Knöll calls
the Command Line Interface (CLI). The primary control set is through the Host
Command Interface. The CLI is designed for use by

Summary of the content on the page No. 2

Examples: Brightness Command (BRT10) Sets the brightness to 10 Volume Command (VOL0000) Set the volume to 0 Freeze Command (FRZ1) Freeze the display Freeze Command (FRZ9999) Freeze the display Power Command (PWR0) Turn power off Power Command (PWR1) Turn power on Power Command (PWR9999) ERROR: not recognized as a valid command Read Commands Read commands have the following format: (AAA?) where, ( - starts the CLI command AAA - denotes the CLI function ? - denotes

Summary of the content on the page No. 3

Cmd Attr Computer Video Inc Function widescreen widescreen R & Auto Source ASC 0 – 1 0 0 – 1 0 1 W Control 0 – 1 0 – 1 R & ASR 0 = 4:3 1 0 = 4:3 1 1 Aspect Ratio W 1 = 16:9 1 = 16:9 R & Blue Color BCG 1 – 63 32 1 – 63 32 1 W Gain R & BRT 4 - 252 128 64-192 128 4 Brightness W 0 – 2 0 – 2 R & 0 = blue 0 = blue BSC 1 1 1 Blank screen W 1 = black 1 = black 2 = white 2 = white R & CEL 0 – 1 0 0 – 1 0 1 Ceiling W R & CLR 4 - 252 128 1 - 31 16 4 Color W R & CON 4 - 252

Summary of the content on the page No. 4

Cmd Attr Computer Video Inc Function Component 3 = Video 3 – 4 = S-video Component 5 = composite 4 = S-video video 5 = composite 6 = PC2 – video component 6 = PC2 – 7 = PC2 - analog component 7 = PC2 - analog R & Splash Screen DSU 0 – 1 1 0 – 1 1 1 W Enable R & FRZ 0 – 1 0 0 – 1 0 1 Freeze W R & Green Color GCG 1 – 63 32 1 – 63 32 1 W Gain 0 – 2 0 – 2 R & 0 = PC gamma 0 = PC gamma GTB 2 2 1 Gamma Table W 1 = video gamma 1 = video gamma 2 = film gamma 2 = film gamma

Summary of the content on the page No. 5

Cmd Attr Computer Video Inc Function On R & UI Menu MNU 0 – 1 0 0 – 1 0 1 W Enable R & Manual Sync MSS **** ** **** ** 1 W Setting R & MTE 0 – 1 0 0 – 1 0 1 Mute W R & Manual MTS **** ** **** ** 1 W Tracking NAV W 0 - 4 -1 0 - 4 -1 1 Navigation ONL R 0 – 2147483647 0 0 – 2147483647 0 1 Unit on Total R & Overscan (TV OVS **** ** 0 – 1 0 1 W only) PWR W 0 – 1 1 0 – 1 1 1 Power R & REA 0 – 1 0 0 – 1 0 1 Rear Project W R & Red Color RCG 1 – 63 32 1 – 63 32 1 W Gain R &

Summary of the content on the page No. 6

Cmd Attr Computer Video Inc Function R & Standby STB 0 – 1 0 0 – 1 0 1 W Enable R & TNT **** ** 1 - 31 16 1 Tint W R & VOL 0 – 62 25 0 – 62 25 1 Volume W R & Vertical VPS **** ** **** ** 1 W Position 0 – 7 0 – 7 0 = Auto Video 0 = Auto Video 1 = NTSC-M 1 = NTSC-M 2 = PAL-BGHI 2 = PAL-BGHI R & Video VSU 3 = PAL-M 0 3 = PAL-M 0 1 W Standard 4 = PAL-N 4 = PAL-N 5 = PAL-60 5 = PAL-60 6 = SECAM 6 = SECAM 7 = NTSC 4.43 7 = NTSC 4.43 Communication Configurati