Summary of the content on the page No. 1
MULTIMEDIA PROJECTOR
MODEL LC-W3
OWNER'S INSTRUCTION MANUAL
Summary of the content on the page No. 2
TO THE OWNER Safety Precaution Before operating this projector, read this manual thoroughly and operate the projector properly. WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC This projector provides many convenient features and SHOCK, DO NOT EXPOSE THIS APPLIANCE functions. Operating the projector properly enables you to TO RAIN OR MOISTURE. manage those features and maintain it in better condition for a – This projector produces intense light from the projection considerable time. lens. Do
Summary of the content on the page No. 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read before This projector should be operated only from the type of power the product is operated. source indicated on the marking label. If you are not sure of the type of power supplied, consult your authorized dealer or Read all of the instructions given here and retain them for later local power company. use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp
Summary of the content on the page No. 4
COMPLIANCES Federal Communication Commission Notice Note : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communi
Summary of the content on the page No. 5
TABLE OF CONTENTS FEATURES AND DESIGN 6 COMPUTER INPUT 24 SELECTING INPUT SOURCE 24 SELECTING COMPUTER SYSTEM 24 PREPARATION 7 PC ADJUSTMENT 26 AUTO PC ADJUSTMENT 26 NAME OF EACH PART OF PROJECTOR 7 MANUAL PC ADJUSTMENT 27 SETTING-UP PROJECTOR 8 PICTURE IMAGE SELECT 29 CONNECTING AC POWER CORD 8 IMAGE LEVEL SELECT 29 POSITIONING PROJECTOR 9 PICTURE SCREEN ADJUSTMENT 30 ADJUSTABLE FEET 10 PICTURE SCREEN SELECT 30 INSTALLING PROJECTOR IN PROPER POSITION 10 MOVING PROJECTOR 11 VIDEO INPUT 31 SELECT
Summary of the content on the page No. 6
FEATURES AND DESIGN This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compact Design ◆ Keystone Correction This projector is extremely compact in size and weight. Positioning of a projector may result in distorted image It is designed to carry and work anywhere you wish to being displayed in
Summary of the content on the page No. 7
PREPARATION NAME OF EACH PART OF PROJECTOR FRONT OF CABINET TOP CONTROLS AND INDICATORS INFRARED REMOTE RECEIVER PROJECTION LENS AIR INTAKE VENT LENS CAP SPEAKERS BACK OF CABINET TERMINALS INFRARED POWER CORD AND CONNECTORS REMOTE RECEIVER CONNECTOR EXHAUST VENT HOT AIR EXHAUSTED ! Air blown from exhaust vent is hot. When using or installing a projector, following precautions should be taken. ● Do not put a flammable object near this vent. ● Keep rear grills at least 3.3’(1 m) away from an
Summary of the content on the page No. 8
PREPARATION SETTING-UP PROJECTOR CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of type of power supply being in use. Connect a projector w
Summary of the content on the page No. 9
PREPARATION POSITIONING PROJECTOR ● This projector is designed to project on a flat ROOM LIGHT projection surface. Brightness in room has a great influence on ● Projector can be focused from 5.0’ (1.5m) ~ 52.2’ picture quality. It is recommended to limit (15.9m). ambient lighting in order to provide best ● Refer to figure below to adjust screen size. image. 52.2’(15.9m) 38.4’(11.7m) 400” Max. Zoom 25.6’(7.8m) 300” 12.7’(3.9m) 308” 200” 5.0’(1.5m) 231” Min. Zoom 100” 154” 40” 77” 30” Max. Zoom 40
Summary of the content on the page No. 10
PREPARATION ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating ADJUSTABLE FEET. Projection angle can be adjusted to 10.5 degrees. Lift front of a projector and pull FEET LOCK LATCHES 1 on both sides of a projector. Release FEET LOCK LATCHES to lock ADJUSTABLE 2 FEET and rotate ADJUSTABLE FEET to fine tune position and tilt. To shorten ADJUSTABLE FEET, lift front of a projector 3 and pull and undo FEET LOCK LATCHES. Position and keystone distortion of image can be ad
Summary of the content on the page No. 11
PREPARATION MOVING PROJECTOR Use Carrying Handle when moving a Projector. When moving a projector, replace lens cover and retract feet to prevent damage to lens and cabinet. When this projector is not in use for an extended period, put it into case (not supplied with this projector). CAUTION IN CARRYING OR TRANSPORTING A PROJECTOR ● Do not drop or bump a projector, otherwise damages or malfunctions may result. ● When carrying a projector, use a suitable carrying case. ● Do not transport a proje
Summary of the content on the page No. 12
CONNECTING PROJECTOR TERMINALS OF PROJECTOR This projector has input and output terminals on its back for connecting computers and video equipment. Refer to figures on pages 12 to 14 and connect properly. INPUT TERMINAL (DIGITAL) AUDIO INPUT 2 JACK INPUT TERMINAL (ANALOG) Connect computer output Connect computer output Connect an audio output (Analog HDB 15 pin type) (Digital DVI-D type) to this (stereo) from computer to to this terminal. terminal. this jack. (Refer to P13.) HD (HDCP Compat
Summary of the content on the page No. 13
CONNECTING PROJECTOR CONNECTING TO COMPUTER Cables used for connection (✽ = Cable is not supplied with this projector.) • VGA Cable (HDB 15 pin) ✽ • Control Cable for Serial Port • DVI-Digital Cable (for Single Link T.M.D.S.) ✽ • Audio Cables (Mini Plug (stereo) ) ✽ • BNC Cable ✽ IBM-compatible computer or Macintosh computer (VGA / SVGA / XGA / SXGA/SXGA+/WXGA/UXGA) Desktop type Laptop type Monitor Output Monitor Output Audio Output Serial port Monitor Output Control Cable Audio for Serial Port
Summary of the content on the page No. 14
CONNECTING PROJECTOR CONNECTING TO VIDEO EQUIPMENT Cables used for connection (✽ = Cable is not supplied with this projector.) • Video Cable (RCA x 1 or RCA x 3) ✽ • DVI-Digital Cable (for Single Link T.M.D.S.) ✽ • BNC Cable ✽ • Audio Cable (RCA x 2) ✽ • S-VIDEO Cable ✽ • HDB 15 pin-SCART 21 pin Cable ✽ Video Source (example) Component video output equipment. Video Cassette Recorder (such as DVD player or high-definition TV source.) Video Disc Player RGB Scart Composite Component Video Composite
Summary of the content on the page No. 15
+ E M U L O V BEFORE OPERATION OPERATION OF REMOTE CONTROL AUTO PC ADJ. BUTTON POWER ON-OFF BUTTON LIGHT BUTTON Used to operate AUTO PC Adjustment function. (P26) Used to turn projector on or Lights the buttons on the remote off. (P20, 21) control for about 10 seconds. COLOR M. BUTTON Used to operate COLOR MANAGEMENT. MENU BUTTON (P35, 36) Used to select MENU operation. (P18, 19) ON-OFF SELECT BUTTON AUTO PC LIGHT - I Used to execute item AUTO AUTO POINT (UP / DOWN / LEFT / RIGHT) selected.
Summary of the content on the page No. 16
BEFORE OPERATION REMOTE CONTROL BATTERIES INSTALLATION Remove battery Slide batteries into Replace compartment lid. 1 2 3 compartment lid. compartment. Two AA size batteries Pull up lid and For correct polarity (+ and remove it. –), be sure battery terminals are in contact with pins in compartment. To insure safe operation, please observe following precautions : ● Use (2) AA or R06 type alkaline batteries. ● Replace two batteries at same time. ● Do not use a new battery with an used battery. ● A
Summary of the content on the page No. 17
BEFORE OPERATION TOP CONTROLS AND INDICATORS This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top. LAMP REPLACE INDICATOR WARNING TEMP. INDICATOR READY INDICATOR LAMP INDICATOR Turns to yellow when Flashes red when Lights green when a Becomes dim when a life of projection lamp internal projector projector is ready to be projector is turned on. draws to an end. temperature is too turned on. And it And bright when a Flashes yellow when high. (P44, 53-54) flashes green in
Summary of the content on the page No. 18
+ E M U L O V BEFORE OPERATION OPERATING ON-SCREEN MENU HOW TO OPERATE ON-SCREEN MENU REMOTE CONTROL UNIT You can control and adjust this projector through ON-SCREEN MENU. Refer to following pages to operate each adjustment on ON-SCREEN MENU. ON-OFF 1 DISPLAY MENU AUTO PC LIGHT - I AUTO Press MENU button to display ON-SCREEN MENU. POINT BUTTONS MENU COLOR M. Used to move a Pointer UP/ DOWN/ 2 MOVING POINTER RIGHT/ LEFT. Move pointer (✽ see below) or adjust value of item by pressing SELECT POI
Summary of the content on the page No. 19
BEFORE OPERATION MENU BAR FOR PC SOURCE Press MENU BUTTON while connecting to PC input source. SETTING MENU SCREEN MENU IMAGE SELECT MENU Used to adjust size Used to change Used to select PC SYSTEM MENU GUIDE WINDOW of image. [Normal settings of projector image level among / Full / True / Digital or reset Lamp Standard, Real Used to select Shows selected zoom +/–] Replace Counter. and Image 1 ~ 10. computer system. item of ON- (Refer to P30) (Refer to P38-43) (Refer to P29) (Refer to P24, 25)
Summary of the content on the page No. 20
BASIC OPERATION TURNING ON / OFF PROJECTOR TURNING ON THE PROJECTOR Complete peripheral connections (with a computer, VCR, 1 etc.) before turning on the projector. 16 Connect the projector's AC power cord into an AC outlet. 2 The LAMP Indicator lights RED, and READY Indicator lights GREEN. Press the POWER ON-OFF button on the top control or on 3 the remote control to ON. The LAMP Indicator dims, and the The preparation display disappears after 20 ~ 30 seconds. cooling fans start to operate.
