Summary of the content on the page No. 1
LCD Projector
Model 8944
USER’S MANUAL
401-8944-00
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Projector 8944 User's Manual – Operating Guide Thank you for purchasing this projector. WARNING ►Before using this product, please read this manual to ensure the proper use of this product. After reading, store in a safe place for future reference. About this manual Various symbols are used in this manual. The meanings of these symbols are described below. WARNING This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect hand
Summary of the content on the page No. 4
Content Content About this manual . . . . . . . 1 . . (EASY . MENU continued . . . . . . . . . 6) Content . . . . . . . . . . . . . 2 . . Koneeyst . . . , Koneeyst , Picture mode , Brightness , Contrast , Color , Tint , Sharpness , Projector features . . . . . . . 3 . . . Whisper , Mirror , Reset , Fteril time , Preparations . . . . . . . . . .3 . . . . Language , Go to Advanced Menu... Contents of package . . . . . . . . . . . . .3 PICTURE menu . . . . . . . .27 . . . Fasteni
Summary of the content on the page No. 5
Projector features / Preparations Projector features This projector is used to project various picture signals onto a screen. This projector requires only a minimal amount of space for installation and can produce a large projected image from even a short distance. Preparations Contents of package Your projector should come with the items indicated on the description sheet. Contact your dealer immediately if anything is missing. NOTE • Keep the original packing materials for future reshipmen
Summary of the content on the page No. 6
Part names Part names (6) (5) Projector (4) HOT! (7) ( ) ( ) Speakers (x 4) (38). ( ) Focus ring (20) (3) ( 0) ( ) (3) Zoom ring (20) ( ) ( ) (4) Lamp cover (59) (8) The lamp unit is inside. ( 5) (5) Lens shift cover (20) HOT! (6) Horizontal lens shift dial (20) (7) Vertical lens shift dial (20) ( ) (8) Front cover ( 4) ( ) (9) Lens (64) (9) ( 3) ( 0) ( ) ( 0) Lens cover (3) ( ) Remote sensors (x 3) (15) ( ) ( 9) ( ) Elevator feet (x ) (9) ( 7) ( 3) Ele
Summary of the content on the page No. 7
Part names (6) Control panel (5) ( ) STANDBY/ON button (17) (4) ( ) MENU button (24) It consists of four cursor buttons. (3) INPUT button (18) (4) POWER indicator (17) (5) TEMP indicator (66) (6) LAMP indicator (66) LAN SD CARD AUX I/O DC 5V 0.5A RGB RGB1 RGB2 M1-D OUT Y CB/PB AUDIO IN 1 VIDEO AUDIO IN 2 CR/PR REMOTE ( ) ( ) (3) AUDIO CONTROL S-VIDEO R L R L (3.5Φ) OUT CONTROL AUDIO IN 3 AUDIO IN 4 AC IN I O Rear panel ( ) Shutdown switch (68) ( )
Summary of the content on the page No. 8
Part names ( ) ( ) Remote control (7) LASER INDICATOR (8) ( ) Laser pointer ( 14) STANDBY/ON VIDEO RGB (4) It is a beam outlet. ( ) LASER INDICATOR (14) (3) LASER button (14) (3) (4) STANDBY/ON button (17) ( 7) BLANK LASER (5) VOLUME button (18) (6) MUTE button (18) ( 6) (7) VIDEO button (19) ( ) ( 7) (8) RGB button (18) ASPECT ( ) (9) SEARCH button (19) PUSH ENTER ( ) ( 3) ( 0) AUTO button (20) ( 8) ( 9) PAGE UP PAGE DOWN ( ) ASPECT button (19) ( 0) ( 4) ES
Summary of the content on the page No. 9
Setting up Setting up Install the projector according to the environment and manner the projector will be used in. WARNING ►Place the projector in a stable horizontal position. If the projector falls or is knocked over it could cause injury and/or damage to the projector. Using a damaged projector could then result in fire and/or electric shock. • Do not place the projector on an unstable, slanted or vibrational surface such as a wobbly or inclined stand. • Do not place the projector on
Summary of the content on the page No. 10
Setting up Arrangement Refer to the illustrations and tables below to determine screen size and projection distance. The values shown in the table are calculated for a full size screen: 0 4×768 (a) Screen size (diagonal) (b) Projection distance (± 0%) (c) Screen height (± 0%), when the vertical lens shift (20) is set full upward. On a horizontal surface (b) (a) (c) up (c) down Suspended from the ceiling (c) up (a) (c) down • Keep a space of 30 cm or more (b) between the sides of
Summary of the content on the page No. 11
LAN SD CARD AUX I/O DC 5V 0.5A RGB RGB1 RGB2 M1-D OUT Y CB/PB Setting up VIDEO AUDIO IN 1 AUDIO IN 2 CR/PR Adjusting the projector's elevator When the place to put the projector is slightly uneven to the left or right, use the REMOTE CONTROL AUDIO elevator feet to place the projector horizontally. S-VIDEO (3.5Φ) R L R L OUT CONTROL AUDIO IN 3 AUDIO IN 4 Using the feet can also tilt the projector in order to project at a suitable angle to the screen, elevating th
Summary of the content on the page No. 12
Setting up Connecting your devices Be sure to read the manuals for devices before connecting them to the projector. Make sure that all the devices are suitable to be connected with this product, and prepare the cables required to connect. Please refer to the following illustrations to connect them. PC LAN RGB OUT AUDIO OUT RGB OUT AUDIO OUT RS-232C M1-D M -D signal RGB IN Monitor source LAN AUX I/O DC 5V 0.5A Remote control RGB RGB1 RGB2 M1-D OUT Y CB/PB VIDEO AUDIO IN 1 AUDIO
Summary of the content on the page No. 13
Setting up Connecting your devices (continued) NOTE • Be sure to read the manuals for devices before connecting them to the projector, and make sure that all the devices are suitable to be connected with this product. Before connecting to a PC, check the signal level, the signal timing, and the resolution. - Do not connect LAN port to any network that might have the excessive voltage. - Some signal may need an adapter to input this projector. - Some PCs have multiple screen display modes
Summary of the content on the page No. 14
SD CARD Setting up Inserting an SD card and USB memory When using the projector with a wireless LAN please insert the included wireless network card. When using a commercial SD memory card in order to view images insert the SD memory card in the same manner. And when using a commercial USB memory in order to view images insert the USB memory to the AUX I/O port. See this “User's Manual - Network Function Section” for information on using either type of card. Wireless communication AUX I/O p
Summary of the content on the page No. 15
Setting up How to use the slot cover lock SD CARD SD CARD Open the slot cover lock, and insert it into the . locking a slot. Close the slot cover lock slowly, and attach a . padlock or combination lock to the slot cover lock. Connecting power supply Connect the connector of the power cord to the AC inlet of the projector. . Firmly plug the power cord's plug into the outlet. . AC inlet Connector of the power cord to the outlet WARNING ►Please use extra caution when connecting the
Summary of the content on the page No. 16
Remote control Remote control Laser pointer This remote control has a laser pointer in place of a finger or rod. The laser beam works and the LASER INDICATOR lights while the LASER button is pressed. LASER INDICATOR LASER button WARNING ►The laser pointer of the remote control is used in place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems. CAUTION ►Use of controls or adjustments or perform
Summary of the content on the page No. 17
Remote control About the remote control signal The remote control works with the projector’s remote sensors. This projector has three remote sensors on the front, on the top, and on the back. The sensors can be respectively turned active or inactive using the “REMOTE RECEIV” in the SERVICE item of OPTION menu (47). Each sensor senses the signal within the following range when the sensor is active. The front and top sensors: 60 degrees (30 degrees to the left and right of the sensor) within
Summary of the content on the page No. 18
LASER INDICATOR BLANK LASER ASPECT PUS HENTER LAN SD CARD AUX I/O DC 5V 0.5A RGB RGB1 RGB2 M1-D OUT Y CB/PB AUDIO IN 1 VIDEO AUDIO IN 2 CR/PR REMOTE CONTROL AUDIO S-VIDEO (3.5Φ) R L R L OUT CONTROL AUDIO IN 3 AUDIO IN 4 AC IN I O LAN SD CARD AUX I/O DC 5V 0.5A RGB RGB1 RGB2 M1-D OUT Y CB/PB AUDIO IN 1 VIDEO AUDIO IN 2 CR/PR REMOTE Remote control CONTROL AUDIO S-VIDEO (3.5Φ) R L R L OUT CONTROL AUDIO IN 3 AUDIO IN 4 LAN AC IN Usi
Summary of the content on the page No. 19
Power on/off Power on/off STANDBY/ON button Turning on the power POWER indicator Make sure that the power cord is firmly and correctly . connected to the projector and the outlet. Remove the lens cover, and set the power switch to the . ON position (marked “ I “). The power indicator will light up in steady orange (66). Then wait several seconds because the buttons may not function for these several seconds. Press the STANDBY/ON button on the projector or the 3. Power remote cont
Summary of the content on the page No. 20
LASER INDICATOR STANDBY/ON VIDEO RGB BLANK LASER Operating LASER INDICATOR STANDBY/ON VIDEO RGB Operating ASPECT PUSH ENTER Adjusting the volume PAGE UP PAGE DOWN Press the VOLUME button on the remote control. . BLANK LASER ESC MENU RESET A dialog will appear on the screen to aid you in adjusting the volume. POSITION AUTO Use the cursor buttons ▲/▼ to adjust the volume. . MAGNIFY MY BUTTON VOLUME To close the dialog and complete the operation, press the ON 1 MUTE VOLUME
