Summary of the content on the page No. 1
Acer Projector
H7530/H7530D Series
User's Guide
Summary of the content on the page No. 2
Copyright © 2009. Acer Incorporated. All Rights Reserved. Acer Projector H7530/H7530D Series User's Guide Original Issue: 07/2009 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents her
Summary of the content on the page No. 3
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power sup
Summary of the content on the page No. 4
iv • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. • Do not
Summary of the content on the page No. 5
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: • the power cord or plug is damaged, cut or frayed • liquid was spilled into the product • the product was exposed to rain or water • the product has been dropped or the case has been damag
Summary of the content on the page No. 6
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire. • When switching the projector off, suggest to ensure the projector completes its cooling cycle before disconnecting power. • Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp br
Summary of the content on the page No. 7
vii Operating environment for using wireless function (Optional) Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its n
Summary of the content on the page No. 8
viii Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or
Summary of the content on the page No. 9
ix Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Proper
Summary of the content on the page No. 10
x First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • In extremely hot, cold or humid environments. • In areas susc
Summary of the content on the page No. 11
Information for your safety and comfort iii First things first x Usage Notes x Precautions x Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 4 Remote Control Layout 5 Getting Started 7 Connecting the Projector 7 Turning the Projector On/Off 8 Turning on the Projector 8 Turning the projector off 9 Adjusting the Projected Image 10 Adjusting the Height of Projected Image 10 How to optimize image size and distance 11 How to get a preferred
Summary of the content on the page No. 12
Troubleshooting 27 LED & Alarm Definition Listing 31 Replacing the Lamp 32 Ceiling Mount Installation 33 Specifications 36 Compatibility modes 38 Regulations and safety notices 42
Summary of the content on the page No. 13
English 1 Introduction Product Features ® This product is a single-chip DLP projector. Outstanding features include: ® • DLP technology • Native 1920 x 1080 1080p resolution 4:3 / 16:9 / L.Box aspect ratio supported • Acer ColorBoost technology delivers nature’s true colors for vivid, life-like images • High brightness and contrast ratio • Versatile display modes (Bright, Presentation, Standard, Movie, Dark Cinema, Game, Sports, User) enable optimum performance in any situation • NTSC / PAL /
Summary of the content on the page No. 14
2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord VGA cable Compostive video cable Security card User's Guide POWER Acer Projector FREEZE HIDE ASPECT RESYNC SOURCE RATIO ZOOM RGB BRIGHTNESS COLOR CONTRAST PgUp PgDn VGA COMPONENT VIDEO S-VIDEO Quick Start Guide DVI HDMI WIRELESS MUTE Remote control Quick start guide 2 x Batteries Carrying ca
Summary of the content on the page No. 15
English 3 Projector Overview Projector Outlook Front / upper side 1 5 6 7 2 8 5 9 3 4 # Description # Description 1 6 Ventilation (outlet) Control panel 2 7 Focus ring Zoom lever 3 8 Zoom lens Ventilation (inlet) 4 9 Lens cap Speaker 5 Remote control receiver Rear side 23 4 5 67 89 1 10 # Description # Description 1 Power socket 6 S-Video input connector 2 USB connector 7 Composite video input connector 3 YPbPr/YCbCr input connector 8 Audio input connector PC analog signal/HDTV/component 4 9 RS
Summary of the content on the page No. 16
4 Control Panel 5 1 6 2 7 3 8 4 9 5 # Function Description Automatically synchronizes the projector to the 1RESYNC input source. • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the 2 MENU OSD menu operation or exit the OSD menu. • Confirm your selection of items. 3 LAMP Lamp Indicator LED. Power/Standby/Power Indicator LED. 4POWER See the contents in "Turning the Projector On/ Off" section. Adjusts the image to compensate for distortion 5KEYSTONE cause
Summary of the content on the page No. 17
English 5 Remote Control Layout 1 POWER 2 6 3 FREEZE HIDE 4 7 5 ASPECT RESYNC SOURCE RATIO 8 9 ZOOM 26 10 11 12 RGB BRIGHTNESS COLOR CONTRAST PgUp 13 15 16 14 PgDn 17 19 VGA COMPONENT VIDEO S-VIDEO 18 20 23 21 DVI HDMI WIRELESS MUTE 22 24 25 # Icon Function Description 1 Infrared Sends signals to the projector. transmitter 2 FREEZE To pause the screen image. 3 HIDE Momentarily turns off the video. Press "HIDE" to hide the image, press again to display the image. 4 RESYNC Automatically synchroni
Summary of the content on the page No. 18
6 # Icon Function Description 16 COLOR Press "COLOR" to adjust the color temperature of image. 17 VGA Press "VGA" to change source to the VGA connector. This connector supports analog RGB, YPbPr (480p/576p/720p/ 1080i), YCbCr (480i/576i) and RGBsync. 18 COMPONENT Press "COMPONENT" to change source to Component video. This connection supports YPbPr (480p/576p/720p/1080p) and YCbCr (480i/576i/1080i). 19 S-VIDEO To change source to S-Video. 20 VIDEO To change source to COMPOSITE VIDEO. 21 DVI No
Summary of the content on the page No. 19
English 7 Getting Started Connecting the Projector VGA RS232 DVD player D-Sub HDMI HDMI D-Sub RB G Y Video Output RB G S-Video Output DVD player, Set-top Box, HDTV receiver # Description # Description 1 Power cord 6 RS232 cable 2 USB cable 7 3 RCA component cable 3 VGA cable 8 S-Video cable 4 HDMI cable 9 Composite video cable 5 Audio cable jack/jack 10 Audio cable Jack/RCA Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is c
Summary of the content on the page No. 20
8 Turning the Projector On/Off Turning on the Projector 1 Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue.(Illustration #2) 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays "Lock" and "S
