Summary of the content on the page No. 1
Acer Projector
X1161/X1161A/X1161N/X1261
Series
User's Guide
Summary of the content on the page No. 2
Copyright © 2009. Acer Incorporated. All Rights Reserved. Acer Projector X1161/X1161A/X1161N/X1261 Series User's Guide Original Issue: 05/2009 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the
Summary of the content on the page No. 3
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Caution for plug as disconnecting device Observe the following guidelines when connecting and disconnecting power to the external power sup
Summary of the content on the page No. 4
iv • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical power • This product should be operated from the type of power indicated on the marking label. If you are not sure of the type of power available, consult your dealer or local power company. • Do not
Summary of the content on the page No. 5
v Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: • the power cord or plug is damaged, cut or frayed • liquid was spilled into the product • the product was exposed to rain or water • the product has been dropped or the case has been damag
Summary of the content on the page No. 6
vi might cause fire or electric shock. In this case, unplug immediately and contact your dealer. • Do not keep using this product to break or drop it. In this case contact your dealer for inspection. • Do not face the projector lens to the sun. It can lead to fire. • When switching the projector off, sugges to ensure the projector completes its cooling cycle before disconnecting power. • Do not turn off the main power abruptly or unplug the projector during operation. It can lead to lamp bre
Summary of the content on the page No. 7
vii Operating environment for using wireless function (Optional) Warning! For safety reasons, turn off all wireless or radio transmitting devices when using your machine under the following conditions. These devices may include, but are not limited to: wireless LAN (WLAN), Bluetooth and/or 3G. Remember to follow any special regulations in force in any area, and always switch off your device when its use is prohibited or when it may cause interference or danger. Use the device only in its n
Summary of the content on the page No. 8
viii Hearing aids. Some digital wireless devices may interfere with some hearing aids. If interference occurs, consult your service provider. Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles such as electronic fuel injection systems, electronic antiskid (antilock) braking systems, electronic speed control systems, and air bag systems. For more information, check with the manufacturer, or its representative, of your vehicle or
Summary of the content on the page No. 9
ix Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm Mercury advisory For projectors or electronic products containing an LCD/CRT monitor or display: “Lamp(s) contain Mercury, Dispose Proper
Summary of the content on the page No. 10
x First thing first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings on the unit provided for ventilation. • Use abrasive cleaners, waxes or solvents to clean the unit. • Use under the following conditions: • In extremely hot, cold or humid environments. • In areas susce
Summary of the content on the page No. 11
Information for your safety and comfort iii First thing first x Usage Notes x Precautions x Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Remote Control and Control Panel Layout 5 Getting Started 7 Connecting the Projector 7 Turning the Projector On/Off 8 Turning on the Projector 8 Turning off the Projector 9 Adjusting the Projected Image 10 Adjusting the Height of Projected Image 10 How to optimize image size and distance 11 How to get a preferred
Summary of the content on the page No. 12
LED & Alarm Definition Listing 29 Replacing the Lamp 30 Ceiling Mount Installation 31 Specifications 34 Compatibility modes 36 Regulations and safety notices 38
Summary of the content on the page No. 13
English 1 Introduction Product Features ® This product is a single-chip DLP projector. Outstanding features include: ® • DLP technology • X1161/X1161A/X1161N series: Native 800 x 600 SVGA resolution X1261 series : Native 1024 x 768 XGA resolution 4:3 / 16:9 aspect ratio supported • Acer ColorBoost technology delivers nature's true colors for vivid, life-like images • High brightness and contrast ratio • Versatile display modes (Standard, Video, Bright, Picture, Game, User) for optimum perform
Summary of the content on the page No. 14
2 Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector with lens cap Power cord VGA cable XXXXXX 3V Composite video cable Battery Security card (X1161/X1261 series) Acer Projector Quick Start Guide User’s guide Remote control Quick start guide Carrying case (X1161/X1161N/X1261 series) English
Summary of the content on the page No. 15
English 3 Projector Overview Projector Outlook Front / upper side 1 7 8 2 3 9 3 1 4 10 5 6 # Description # Description 1 Ventilation (inlet) 6 Lens cap 2 Ventilation (outlet) 7 Power button 3 Remote control receivers 8 Remote control 4 Focus ring 9 Zoom lever 5 Zoom lens 10 Horn Rear side * 7 10 * 6 345 7 8 9 * 1 10 2
Summary of the content on the page No. 16
4 # Description # Description X1161N Series: X1261 Series: 1 Power socket 1 Power socket TM TM 2 2 Kensington lock port Kensington lock port 3 PC analog signal/HDTV/component PC analog signal input connector (VGA 3 video input connector (VGA IN 1 or In 1 or VGA In) VGA IN) 10 USB connector 4 S-Video input connector 5 Composite video input connector X1161/X1161A only: PC analog signal/HDTV/component vid- 1 Power socket 6* eo input connector (VGA IN 2) TM 2 7 RS232 connector Kensington lock por
Summary of the content on the page No. 17
English 5 Remote Control and Control Panel Layout 1 2 8 3 9 8 4 5 10 6 11 7 12 2 13 # Icon Function Description 1 Remote control Receives signals from remote control. receiver 2 POWER Refer to the "Turning the Projector On/Off" section. 3 MENU • Press "MENU" to launch the Onscreen display (OSD) menu, back to the previous step for the OSD menu operation or exit the OSD menu. • Confirm your selection of items. 4 KeyPad 0~9 Press "0~9" to input a password in the "Security". 5 ASPECT RATIO To choo
Summary of the content on the page No. 18
6 # Icon Function Description 13 Empowering Unique Acer functions: eView, eTimer, ePower Management. key Note: Remote Control Placement Please refer to the illustration to attach the remote control to the projector. English
Summary of the content on the page No. 19
English D-Sub 7 Getting Started Connecting the Projector VGA RS232 RS232 USB USB D-Sub D-Sub D-Sub X1161 series Y Y S-Video output Video output # Description # Description X1161N series: X1261 series: 1Power cord 1Power cord 2 VGA cable 2 VGA cable 8 USB cable 3 Composite video cable X1161/X1161A series: 4 RS232 cable 1 Power cord 5 S-Video cable * 2 VGA cable Audio cable jack/jack 6 3 Composite video cable * Audio cable jack/RCA 7 * 5S-Video cable USB cable 8 8 USB cable * RS232 cable 4
Summary of the content on the page No. 20
8 Turning the Projector On/Off Turning on the Projector 1 Remove the lens cap.(Illustration #1) 2 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 3 Turn on the projector by pressing "Power" button on the control panel, and the Power indicator LED will turn blue. (Illustration #2) 4 Turn on your source (computer, notebook, video player ,etc.). The projector will detect your source automatically. • If the screen displays "Lock" and "
