Summary of the content on the page No. 1
™
3M MPro120
3
PocketProjector
Operator’s Guide
Summary of the content on the page No. 2
™ 3M Pocket Projector MPro120 2 © 2009 3M. All Rights Reserved. English
Summary of the content on the page No. 3
English ™ 3M Pocket Projector MPro120 Contents Intended Use Statement ......................................................................................... 4 Trademarks and Copyrights .................................................................................... 4 Safety Information .................................................................................................. 4 Safety Labels ..........................................................................................
Summary of the content on the page No. 4
™ 3M Pocket Projector MPro120 Intended Use Statement ™ The 3M Pocket Projector MPro120 is designed to operate with the 3M-specified battery and 3M battery charger and in a normal office and home environment. • 10˚–35˚C (50˚–95˚F) • 10–80% RH (without condensation) • 0–1829 m (0–6000 feet) above sea level The ambient operating environment should be free of airborne smoke, grease, oil and other contaminants that can affect the operation or performance of the projector. Use of this product in
Summary of the content on the page No. 5
English ™ 3M Pocket Projector MPro120 m Warning To reduce the risk associated with hazardous voltage: • Do not modify this product in any way. Use only 3M approved replacement components. • Do not attempt to service this projector other than battery replacement. There are no user serviceable parts other than the battery. Service to be performed only by a 3M-authorized service provider using 3M-approved system components. • Do not use the wall power supply in a wet environment. • Do not use
Summary of the content on the page No. 6
™ 3M Pocket Projector MPro120 m Warning To reduce the risk associated with fire and explosion, battery leakage or overheating: • Do not immerse the battery in water or allow to get wet. • Do not reverse the positive(+) and negative(-) terminals. • Do not connect the battery directly to a wall outlet. Use only the 3M-specified wall charger or automobile charger. • Do not strike, throw or subject the battery to physical shock. • Do not pierce the battery or break it open. • Keep batteries
Summary of the content on the page No. 7
English ™ 3M Pocket Projector MPro120 Safety Labels X X X X X X X X X X X X X X X X X X X LITHIUM ION POLYMER BATTERY Model No. BLP508-001 3.7V 2200mAh 8.1Wh P/N 78-6972-0004-2 m Warning • Use a specified charger. • Do not throw the battery into fire or heat. • Do not short-circuit the battery terminals. • Do not disassemble the battery. Charging Specification Standard Charge 0.44A/4.2V Cut Off Current 44mA Max Charge 2.2A/4.2V Cut Off Current 44mA LED Light Output Maximum Radiant Power
Summary of the content on the page No. 8
™ 3M Pocket Projector MPro120 FCC STATEMENT - CLASS B This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instruction manual may cause interference to radio communications. It has been tested and found to comply with the limits for a Class “B” computing device pursuant to Subpart B of Part 15 of the FCC Rules, which are designed to provide reasonable protection against such interference when operated in a residential in
Summary of the content on the page No. 9
English ™ 3M Pocket Projector MPro120 WEEE Statement The following information is only for EU-members States: The mark shown to the right is in compliance with Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE). The mark indicates the requirement NOT to dispose the equipment as unsorted municipal waste, but use the return and collection systems according to local law. RoHS Statement 3M Projection Systems can provide RoHS certification for products meeting the RoHS 1 direc
Summary of the content on the page No. 10
™ 3M Pocket Projector MPro120 Package Contents 1 3M Pocket Projector MPro120 2 2 Table Top Tripod 1 3 Rechargeable Battery 4 Carrying Pouch 4 5 Outlet Adapters (4) 3 6 Power Adapter 7 AV Adapters 8 Product Warranty and Safety Guide 9 Quick Start Guide 6 10 AV Cable 5 11 VGA-Audio Cable 8 9 7 10 11 10 © 2009 3M. All Rights Reserved. English
Summary of the content on the page No. 11
English ™ 3M Pocket Projector MPro120 1 4 Parts 1 Power Button 2 5 2 Brightness Mode Button 3 Volume Down Button 3 4 Volume Up Button 5 Battery Status Button 6 6 Status Indicator 7 Focus Wheel 8 Lens 9 Speaker 10 VGA-AV Input 7 8 9 11 DC Power Input 10 11 12 13 14 9 12 Battery Cover 13 Tripod Socket 14 Flip Stand © 2009 3M. All Rights Reserved. 11
Summary of the content on the page No. 12
™ 3M Pocket Projector MPro120 Getting Started Install Battery The 3M MPro120 comes with a rechargeable battery. The battery is quick and easy to install and comes partially charged. To install the battery: slide the back cover off, insert the battery, and reinstall the cover. Important Note: Use only the 3M-specified battery: 78-6972-0004-2. Battery Maintenance Tips: • Remove the battery when the projector will not be used for one or more weeks. • Charge and discharge the battery at least onc
Summary of the content on the page No. 13
English ™ 3M Pocket Projector MPro120 Power Adapter The power adapter is used to charge the battery or power the projector. There are four outlet adapters to give you the flexibility to power the 3M MPro120 in most countries. You can also power the projector with the 3M MPro120 Car Charger, available separately. Installing An Outlet Adapter Onto The Power Adapter 1 Select the outlet adapter that will plug into your wall outlet. 2 Align the outlet adapter to the power adapter. Turn the outlet ad
Summary of the content on the page No. 14
™ 3M Pocket Projector MPro120 Charge the Battery The 3M MPro120 rechargeable battery gives you up to 4 hours of battery life in normal brightness mode. When the battery needs to be charged, the Status Indicator will flash red. The battery is charged by connecting the 3M MPro120 power adapter to the projector. 1 Turn the projector power off. 2 Connect the power adapter to the projector’s DC in. 3 Connect the other end of the power adapter into the electrical outlet. 4 The Status Indicator wi
Summary of the content on the page No. 15
English ™ 3M Pocket Projector MPro120 Making Connections Connecting to a Composite Video Device Use the AV Cable to input video from camcorders, digital cameras, DVD players and digital media players into the VGA - AV input on the projector. 1 Connect the AV cable to the projector’s VGA-AV input. 2 Connect the other end of the AV cable to the video device’s audio and video outputs. Tip: Some video devices do not have the standard audio and video connections and may require an AV cable specifi
Summary of the content on the page No. 16
™ 3M Pocket Projector MPro120 Connecting to a Component Video Device For component video input, you must purchase the optional 3M MPro120 Component AV Cable. This cable sends a higher quality video signal for the best possible image. 1 Connect the Component AV cable to the projector’s VGA-AV input. 2 Connect the other end of the AV cable to the video device’s audio and video outputs. Important Note: There are two red connectors on the Component AV cable. One is for the right audio channel and
Summary of the content on the page No. 17
English ™ 3M Pocket Projector MPro120 Tip: Some video devices do not have the standard audio and video connections and may require an AV cable specified by the manufacturer. The AV cable allows you to connect your video device to your TV monitor or your projector and may be purchased from the video device manufacturer. Once you have the AV cable, you may need the cable adapters to connect the video device cable and the projector cable. Some video devices, by default, will not output a video
Summary of the content on the page No. 18
™ 3M Pocket Projector MPro120 Connecting to a Computer Use the VGA-Audio cable to connect the projector to desktop computers, laptop computers, ultra-portable computers and some personal digital assistants (PDAs). The projector supports VGA, SVGA, XGA, and WXGA resolutions. 1 Connect the VGA Cable to the MPro120 projector. 2 Connect the VGA Cable to the computer’s video and audio outputs. 3 Set the computer resolution to one of the supported resolutions. Description Resolution (width x height
Summary of the content on the page No. 19
English ™ 3M Pocket Projector MPro120 Operating Instructions Powering On Press and hold the power button for 3 seconds. Release the power button when the projector begins to project an image and the status indicator turns green. 00:03 Tip: The video output on some devices is turned off by default. Please refer to the device’s documentation for details on enabling the video output. Powering Off Press and hold the power button for 3 seconds. Release the power button when the projected image is
Summary of the content on the page No. 20
™ 3M Pocket Projector MPro120 Adjusting Image Size The 3M MPro120 can project an 8 to 50 inch (203–1270 mm) diagonal image. Refer to the chart below. Diagonal SIze Image Width Image Height Projector-to-Screen Distance 8 in (20.32 cm) 6 3/8 in (16.2 cm) 4 3/4 in (12.2 cm) 6 3/4 in (17.0 cm) 14 in (35.56 cm) 11 1/4 in (28.4 cm) 8 3/8 in (21.3 cm) 11 3/4 in (29.9 cm) 20 in (50.8 cm) 16 in (40.6 cm) 12 in (30.5 cm) 16 3/4 in (42.7 cm) 26 in (66.04 cm) 20 3/4 in (52.8 cm) 15 5/8 in (39.6 cm) 21 7/8
