Summary of the content on the page No. 1
A
Stereo - AT2002S, AT2402, AT2702S
GB SERIES PROJECTION TELEVISIONS
INSTRUCTION MANUAL
Projection - GB4308, GB5108
Please read this manual carefully before operation.
P
E
X
D
I
G
I
T
A
L
I
N
C
.
C
O
M
Summary of the content on the page No. 2
Instruction Manual BEFORE OPERATION Dear Customer: Customer's Record Congratulations! You have purchased one of the finest CoIor TVs on the market! You wiIl find the model number and chassis num- This manuaI wiIl help you use the many exciting ber on the back of your TV set. and usefuI features to make your TV viewing more Record these numbers in the spaces provided enjoyabIe than ever before. beIow. Before operating your TV set, pIease read alI these Refer to them whenever you caII upon
Summary of the content on the page No. 3
Projection - GB4308, GB5108 BEFORE OPERATiON (continued) Important Safety Instructions CAUTION PLEASE READ THESE INSTRUCTIONS, KEEP THESE INSTRUCTIONS AND HEED ALL WARNINGS. FOLLOW ALL INSTRUCTIONS. Electrical energy can perform many useful functions. This TV set has been engineered and manufactured to assure your personal safety. However improper use can result in potential electrical shock or fire hazards. In order not to defeat the safe guards incorporated in this TV set, observe the follow-
Summary of the content on the page No. 4
Instruction Manual BEFORE OPERATiON (continued) Precautions (continued) Damage Requiring Service - Unplug the TV set from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. lf the power cord or plug is damaged or frayed. b. lf liquid has been spilled or objects have fallen into the TV set. c. lf the TV set has been exposed to rain or water. d. If the TV set has been subject to excessive shock by being dropped, or the cabinet has been damaged. e.
Summary of the content on the page No. 5
Projection - GB4308, GB5108 BEFORE OPERATlON (continued) FCC Warning Class B Computing Device Information to User This equipment has been tested and found to compIy with the Iimits for a class B digitaI device pursuant to part 15 of FCC Rules. These limits are designed to provide reasonabIe protection against harmful interference in a residential instal- lation. This equipment generates, uses, and can radiate radio frequency energy and, if not instalIed and used in accor- dance with the instruct
Summary of the content on the page No. 6
Instruction Manual CONTENTS lNTRODUCTlON Features ...............................................................................................................................................9 ControI Buttons ....................................................................................................................................10 Menu ....................................................................................................................................................1
Summary of the content on the page No. 7
Projection - GB4308, GB5108 INTRODUCTION Features Conventional coIor TVs apply 60Hz interlaced scanning and scan a picture in two separate fields, which resuIts in distinct scanning structuraI lines and Iine fIicker. As the TVs can dispIay onIy 30 frames of images per second, it cause wide --range image fIicker. The larger the TV screen is, the more conspicuous the probIems are. Watching this kind of TV, you are susceptibIe to eyestrain. With the worId's advanced digital inverter technoIogy, APE
Summary of the content on the page No. 8
Instruction Manual INTRODUCTION (continued) Control Buttons Front panel Rear panel Note: The buttons of the same name on the remote controller or the RPTV' s front panel share the same function. The foIlowing section of this manual wiII focus on operation method of the remote controller. 7
Summary of the content on the page No. 9
Projection - GB4308, GB5108 INTRODUCTION (continued) (continued) Control Buttons Remote controller Notes: The button design and specifications of the remote controller are subject to change without notice. 8
Summary of the content on the page No. 10
Instruction Manual INTRODUCTION (continued) Menu You can adjust or preset the RPTV with the MENU DISPLAY function on remote controller. MENU Press the button repeatedly until the RPTV displays the following menus : DISPLAY (Menu disappears.) After selecting a menu, press the - CH + buttons to highlight the desired item and press the - VOL+buttons to adjust. Notes: 1 There is no Tune menu in the video mode. 2 The mark of indicates that there is a sub - menu. 3 The above - mentio
Summary of the content on the page No. 11
Projection - GB4308, GB5108 INSTALLATION To Install the RPTV Please read the PRECAUTIONS completely before installation. lt is recommended to watch RPTV in soft and indirect light and face center of the screen for optimum watching effect. Allow enough space (at least 10cm) between the RPTV and the wall for proper ventilation. Avoid excessively warm or wet locations to prevent possible damage to the cabinet or components. Keep proper watching distance To prevent the RPTV from toppling, there is a
Summary of the content on the page No. 12
Instruction Manual INSTALLATION (continued) To Connect the Antenna An outdoor antenna or CATV is recommended for the best reception. The antenna type and its Iocation differ dependent on Iocal conditions. Notes: 1 lt is recommended that a 75 coaxiaI cabIe be used in order to eliminate possible interference and noise which may occur due to nearby radio transmissions. 2 When using a 300 twin - Iead feeder, connect it to a 300 / 75 converter and insert the con- verter into the RPTV's ANTENNA IN t
Summary of the content on the page No. 13
Projection - GB4308, GB5108 INSTALLATION (continued) Remote Batteries 1. Remove the battery cover. 2. Place in two LR03WCH batteries. Make sure the positive and negative polarities are correct. Caring for the remote controller 1 When in operation, pIease point the remote controller di- rectIy to center of the RPTV screen. 2 Do not repeatedly press the buttons on the remote controlIer too quickly. 3 To avoid battery Ieakage, remove batteries from the remote controller when it is not to be used fo
Summary of the content on the page No. 14
Instruction Manual OPERATIONS Basic Buttons Channel Number 100+ Press the 100+ button repeatedly to select " - ", " - - " or "- - - " respe- 09 ctiveIy. Press the 0~9 buttons to enter a one - digit, two - digit or three - digit channel number respectively. - CH + , - VOL + buttons Press the - CH + buttons to seIect a lower or upper position number. Press the - VOL + buttons to decrease or increase voIume. button The MUTE function is used when you answer a phone or receive guests. During watchi
Summary of the content on the page No. 15
Projection - GB4308, GB5108 OPERATIONS (continued) Power On / Off Plug in the supply socket and press the button on the RPTV. The power in- dicator Iights and the RPTV enters the STANDBY mode. ln the STANDBY mode, press the , or - CH + buttons on the remote controller or -P + buttons on the front panel of the set to turn on the RPTV. Press the b utton again on the remote controIler and the RPTV enters STANDBY mode. To turn off the RPTV completeIy, press the
Summary of the content on the page No. 16
Instruction Manual BASIC FUNCTIONS (continued) Tuning in Auto Program Press the button to caII up the Tune Menu. Press the - CH + buttons to highIight "Auto Program". Press the VOL + button and the RPTV wilI search automaticaIly in sequence. After searching, the RPTV will store the optimum tuning position, and unused channel number will be set to Skip mode automatically. Notes: MENU 1 During auto search, press the button to stop auto search. DISPLAY 2 When " Antenna" is set to
Summary of the content on the page No. 17
Projection - GB4308, GB5108 OPERATIONS (continued) Picture Improvement Press the button to select one of the four picture modes. Normal Nature and standard picture Vivid Sharp and bright picture with improved gradation. Soft Soft and Iight picture Memory User - set picture mode To set picture quality Press the button to calI up the Video Menu. Press the - CH + buttons to select an adjustment. Then press the - VOL + buttons to adjust. Notes: Adjustment Effe
Summary of the content on the page No. 18
Instruction Manual OPERATIONS (continued) Sound Improvement To select a sound mode Press the button to seIect one of the four sound modes. Memory User- set sound mode Speech News/dialogue Theater Theater audio effect Music Concert hall audio effect To set sound quality EquaIizer adjustment Press the button to call up the Audio Menu. Press the - CH + buttons to highIight " Equalizer" [Equalizer] and press the VOL + button to turn on the next menu 120Hz 50 display. 500Hz 50 Pre
Summary of the content on the page No. 19
Projection - GB4308, GB5108 OPERATIONS (continued) Sound Improvement (continued) BBE This function can characterize the sound, generate the playback sound aImost like natural sound. Press the - CH + buttons to highIight the "BBE", and press the - VOL + buttons to select "On" or "Off". MSS (Surround control switch ) Press the - CH + buttons to highlight the " MSS ", and press the - VOL + buttons to select "On" or " Off". Audio - out Audio - out Press the - CH + buttons to highlight the " Audio -
Summary of the content on the page No. 20
Instruction Manual OPERATIONS (continued) Menu Function Language SeIect Press the button to caII up the Setup Menu. [Language] FUNCTION FUNCTION English Francis Espanol Press the - CH + buttons to highIight " Language", Select and press the VOL + button to turn on the next menu dispIay. Notes: 1 You may switch the languages for the On - Screen DispIay to English, French or Spanish. MENU 2 Press the button to return to Setup Menu. DISPLAY Timer Press the - CH + buttons to
