Fujitsu FTP-627MCL103 user manual

Summary of the content on the page No. 1

24drive, v FTP-607 SerieS
HiGH SPeed THerMaL PrinTer
2-inCH TyPeea Sy LOad MeCHaniSM
FTP-627MCL103/113
n Overview
The FTP-607MCL Series thermal printer (driven by 24VDC)
provides ultra-high speed printing (00mm/s) for 2-inch and
3-inch wide paper. Our original platen removal mechanism
allows easy paper loading and maintenance.
The FTP-607 MCL series can be used for a variety of
applications, such as POS/ECR, Kiosk terminals, banking
terminals, and measurement and medical equipme

Summary of the content on the page No. 2

FTP-627MCL103/113 n ParT nuMberS Name Part Number FTP-627MCL103 Printer Mechanism FTP-627MCL113 LSI FTP-627CU201 parallel FTP-627DCL218 Interface Board serial FTP-627DSL238 Centronics FTP-628Y202 Interface Cable (board to mechanism) RS-232C FTP-628Y302 logic FTP-629Y401 Power supply cable head, motor FTP-629Y601 n SPeCiFiCa TiOnS Item Specifications Part number FTP-627MCL03 FTP-627MCL3  Printing method Thermal-sensitive line dot method Dot structure 384 dots/line Dot pitch (Horiz

Summary of the content on the page No. 3

FTP-627MCL103/113 n SPeCiFiCa TiOnS Specification Item FTP-627MCL103 FTP-627MCL113 Interface Conforms to RS232C / Centronics 24 VDC ±5%, 1.0 A average (1.5A peak) For print head 24V, 25% printing ratio Operating For motor 24 VDC, 1 A maximum Voltage For logic 5 VDC ±5%, 0.1 A maximum Printer mechanism 72.4 x 33.0 x 15.5 mm (WxDxH) 75.0 x 33.4 x 15.5 mm (WxDxH) Dimensions Interface board 70 x 60 x 24 mm (WxDxH) Mechanism Approximately 42g Approximately 54g Weight Interface board Approximately 25

Summary of the content on the page No. 4

F.T FUJITSU F.T FUJITSU 2.4 Ø 1.2 +0.1 (positioning holes) FTP-627MCL103/113 n diMenSiOnS 1. Printer mechanism center of paper center of paper FTP-627MCL101 FTP-627MCL103 58.0 58.0 24(paper an d sensor) 24(paper an d sensor) 10.7 10.7 15.5 15.5 4.6 62.2 4.6 62.2 64.7 64.7 65.6±0.1 65.6±0.1 66.7 FTP-627MCL113 Center of paper 1.0 1.0 40.6 (34.5) 75.1 (width of main shaft ) 74.4 (width of main body except p laten head) at lever open 40.5 34.2 58.0 at lever lock (paper en d sensor) 24.0 10.7 (plat

Summary of the content on the page No. 5

4 1 4- 3.2 FTP-627MCL103/113 2 interface board 41.0 30 1 CN3 CN8 CN5 CN1 CN7 CN6 CN2 1 6 3 1 8 1 17.5 35.5 51.0 3.3 63.5 3.3 Unit: mm 70.0 5 6.5 (FG) 60.0 53.5 3.3 3.3 21.8 2 30 29 1 1 2 16.0 42.0

Summary of the content on the page No. 6

FTP-627MCL103/113 n COnneCTOr Pin aSSiGnMenT OF MeCHaniSM (FPC) 1. Thermal Head Part number : 5260-3090 Molex or equivalent FTP-627MCL101/103 Pin aSSiGnMenT Signal I/O Contents No 1 PHK — Photointerrupter (Cathode) 2 VSEN — Ground power supply for paper sensor 3 PHE O Photointerrupter (Emittor) 4 SW — Platen open switch 5 SW O Platen open switch 6 VH — 7 VH — Power supply for thermal head 8 VH — 9 DI I Print data in 10 STB3 I Strobe 3 11 VDD — Power for logic 12 TH O Thermistor 13 GND —

Summary of the content on the page No. 7

FTP-627MCL103/113 Fujitsu Components International Headquarter Offices Japan europe Fujitsu Component Limited Fujitsu Components Europe B.V. Gotanda-Chuo Building Diamantlaan 25 3-5, Higashigotanda 2-chome, Shinagawa-ku 232 WV Hoofddorp  Tokyo 4, Japan Netherlands Tel: (8-3) 5449-700 Tel: (3-23) 556090  Fax: (8-3) 5449-2626  Fax: (3-23) 5560950 Email: promothq@ft.ed.fujitsu.com Email: info@fceu.fujitsu.com Web: www.fcl.fujitsu.com Web: http://www.fujitsu.com/emea/services/components/ no