Summary of the content on the page No. 1
EPSON Stylus Photo 875DCS
Memory Stick access light Media
paper support
PC card
printer cover
left edge
Media name Size Part number
eject lever
guide
right edge EPSON 360 dpi Ink Jet Letter S041060
guide Paper A4 S041059
printer cover EPSON High Quality Ink Letter S041111
window Jet Paper A4 S041117
EPSON Photo Quality Ink Letter S041062
Jet Paper Legal S041067
A4 S041061
EPSON Photo Quality Letter S041072
Glossy Film A6 S041107
Memory A4 S041071
Stick
EPSON Photo Paper Letter S041141
4 × 6 in
Summary of the content on the page No. 2
EPSON Stylus Photo 875DCS Paper Paper type Size Paper types Thickness Weight Single sheets Letter (8.5 × 11 inches) Plain bond paper and special ink jet 0.003 to 0.004 inch 17 to 24 lb 2 Legal (8.5 × 14 inches) papers distributed by EPSON (0.08 to 0.11 mm) (64 to 90 g/m ) Half letter (statement, 5.5 × 8.5 inches) for plain bond for plain bond Executive (7.5 × 10 inches) paper paper A4 (210 × 297 mm) A5 (148 × 210 mm) Transparencies, Photo Letter (8.5 × 11 inches) Transparencies, glossy paper,
Summary of the content on the page No. 3
EPSON Stylus Photo 875DCS . To ensure good results, use genuine EPSON cartridges A and do not refill them. Other products may cause damage to your printer not covered by EPSON’s warranties. (Paper is loaded in the opposite direction.) Don’t use an ink cartridge if the date on the package has expired. L & R ® PC Card Slot and Memory Stick Adapter ® The Sony Memory Stick adapter comes preinstalled in your printer’s PC card slot, and is compatible with the Sony Memory C Stick. EPSON 4 × 6-in
Summary of the content on the page No. 4
EPSON Stylus Photo 875DCS Environmental S is on When the S paper out light comes on, your paper is out or incorrectly loaded. Make sure none of the Temperature sheets are curled, creased, old, stuck together, or too thin. Then reload the paper against the right Operation 50 to 95 °F (10 to 35 °C) edge guide and slide the left edge guide against it. Storage* - 4 to 140 °F (- 20 to 60 °C) Press the E load/eject button to resume printing. 1 month at 140 °F (60 °C)
Summary of the content on the page No. 5
EPSON Stylus Photo 875DCS Keep ink cartridges out of the reach of children and 4. Tilt each cartridge forward slightly as you lower it into its do not drink the ink. holder. Hang the tabs at the back of the cartridge on the hooks on the holder clamps. If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. Before you begin, make sure the printer is plugged into an tabs electrical outlet and turned on. 1. Lower
Summary of the content on the page No. 6
Summary of the content on the page No. 7
EPSON Stylus Photo 875DCS ™ 3. If you’re running Windows, you see the Image Expert Viewing Photos on the Memory Stick Quick Tour screen. Click Close. (Click to deselect Show at startup in the lower left corner if you don’t want to see To view photos on the Memory Stick, do one of the the Quick Tour screen at startup.) following: You see a screen similar to the one below: ❏ Click View Pictures in PC Card Slot if the Image Expert view screen appears at startup. ❏ Click the View PC Card Image
Summary of the content on the page No. 8
Summary of the content on the page No. 9
EPSON Stylus Photo 875DCS You cannot print if either ink cartridge is empty. Leave 4. The color cartridge is on the right and the black cartridge is the empty cartridge installed in the printer until you have on the left. Pull up the ink cartridge clamp all the way. The obtained a replacement. Otherwise the ink remaining in cartridge rises up from its holder. the print head nozzles may dry out. Use these EPSON ink cartridges within six months of installing them and before the expirati
Summary of the content on the page No. 10
EPSON Stylus Photo 875DCS Never turn off the printer while the Ppower light is 7. Tilt the ink cartridge forward slightly as you lower it into its flashing, unless the printer hasn’t moved or made noise holder. for more than 5 minutes. Hang the tabs at the back of the cartridge on the hooks on the holder clamps. Cleaning the Print Head If your printed image is unexpectedly light or faint, or dots are missing from the image, you may need to clean the print head. tabs This unclog
Summary of the content on the page No. 11
EPSON Stylus Photo 875DCS Make sure paper is loaded in the printer and click Print 8. If you don’t see any improvement after cleaning three or nozzle check pattern. Then click Next. The nozzle check four times, check the solutions in the Printer Basics book. pattern prints (see “Examining the Nozzle Check Pattern” You can also turn the printer off and wait overnight—this for details). allows any dried ink to soften—and then try cleaning the print head again. 7. If the nozzle check pat
Summary of the content on the page No. 12
EPSON Stylus Photo 875DCS 6. Select the most precise alignment pattern from the choices 4. Open the printer cover. Secure the ink cartridge holder to on the test page. Enter the number of the best aligned the printer with tape as shown, then close the printer cover. pattern following the instructions on the screen (pattern 8 is Tape the ink cartridge holder the current setting). You may need to repeat steps 5 and 6 to the printer case more than once to align your print head completely. Cle