Xerox WORK CENTER 390 user manual

Summary of the content on the page No. 1

E310TECH
Technical Instructions Printers / OEM Info Tools 1
Xerox Work Center 390 Lexmark Optra #1 Phillips Screwdriver
Toner Part Num.: 113R462 E310/E312/E312L Small Flat Blade Screwdriver
CORPORATE
LOS ANGELES, USA Page Yield @ 5%: 3,000 pgs Toner Part Num: 13T0301 Needlenose Pliers
US 1 800 394.9900 Resolution: 6,000 dpi Page Yield @ 5%: 3,000 pgs Soft Lint-Free Cloth
Int’l +1 818 837.8100
Resolution: 1,200 dpi Cotton Swabs
FAX 1 800 394.9910
Xerox Docuprint
Anhydrous Isopropyl Alcohol
Int

Summary of the content on the page No. 2

2 Lexmark Optra E310 Technical Instructions Photo 4 Step 4 Using dry compressed air or a vacuum, clean out both sections of the cartridge. Step 5 Remove the three screws holding the end Notes caps on each side of the cartridge. (See Photos 4 and 5) Photo 5 Photo 6 Step 6 Remove the drum shutter arm from the contact end cap, rotate the drum shutter up towards the handle on the cartridge until the tab on the shutter fits through the notch on the end cap. (See Photo 6) NOTE: Let the shutter dangle

Summary of the content on the page No. 3

Lexmark Optra E310 Technical Instructions 3 Photo 10 Step 9 With the drum shutter still attached, remove the end cap from the gear side of Notes the hopper. (See Photo 10) NOTE: Once again there is a white bearing on the foam feed roller axle. Do not lose the bearing. Photo 11 Step 10 Photo 11 shows the gear alignment of the hopper. Remove the five white gears from the hopper. (See Photo 11) Photo 12 Step 11 Remove the two metal gear axles from the gear side of the hopper. (See Photo 12) Photo

Summary of the content on the page No. 4

4 Lexmark Optra E310 Technical Instructions Photo 18 Step 18 Release the two clips that hold the devel- oper roller end cap. Step 14 (See Photo 18 and 19) Remove the three screws that Remove the end cap. hold the wiper blade. (See Photo 15) Photo 15 Photo 19 Photo 20 Step 15 Step 19 Lift out the wiper blade straight Slide the developer roller out through the up to remove. side of the hopper. Step 16 (See Photo 20) Grab the drum by the gears and Clean the developer roller using a dry lint- lift

Summary of the content on the page No. 5

2 2 ENGINE FACT SHEET PRINTER MODEL COMPATIBILITY P PR RI IN NT TE ER R M MO OD DE EL L O OE EM M N NU UM MB BE ER R 1OS0150 Lexmark E210 ML1210D3 Samsung ML-1010 ML1210D3 Samsung ML-1020M ML1210D3 Samsung ML-1210 ML1210D3 Samsung ML-1220M ML1210D3 Samsung ML-1250 ML1210D3 Samsung ML-1430 ML4500D3 Samsung ML-4500 ML4500D3 Samsung ML-4600 FUTURE GRAPHICS PRODUCT LISTING P Pr ro od du uc ct t D De es sc cr ri ip pt ti io on n I It te em m N Nu um mb be er r P Pa ac ck k Q Qt ty y. . Sinonar Dru

Summary of the content on the page No. 6

ENGINE FACT SHEET PRINTER MODEL COMPATIBILITY P PR RI IN NT TE ER R M MO OD DE EL L O OE EM M N NU UM MB BE ER R 1OS0150 Lexmark Optra E310 ML1210D3 Lexmark Optra E312 ML1210D3 Lexmark Optra E312L ML1210D3 Olivetti PGL 8L ML1210D3 Samsung ML-5000A ML1210D3 Samsung ML-5000G ML1210D3 Samsung ML-5050G ML4500D3 Samsung ML-5100A ML4500D3 Xerox Docuprint P8e 113R296 Xerox Docuprint P8ex 113R296 Xerox WorkCentre 385 113R462 Xerox WorkCentre 390 FUTURE GRAPHICS PRODUCT LISTING P Pr ro od du uc ct t D D