Summary of the content on the page No. 1
MULTIFUNCTIONAL DIGITAL SYSTEMS
Operator's Manual
for Copying Functions
Summary of the content on the page No. 2
Summary of the content on the page No. 3
Preface Thank you for purchasing the TOSHIBA multifunctional digital systems e-STUDIO166/206. We have provided you with this manual for the operation of this equipment. This operator’s manual describes the following: How to use this equipment How to inspect and carry out maintenance on this equipment How to remedy mechanical and copying problems Be sure to read this manual before using the e-STUDIO166/206. Keep this manual handy and retain it for future reference. Preface 1
Summary of the content on the page No. 4
Notice to Users After a suitable place has been selected for the installation of the e-STUDIO166/206, please do not change it. Avoid excessive heat, dust, vibration and direct sunlight. Also, provide proper ventilation as the copier emits a small amount of ozone. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Working environment From EMC (Electromagnetic Compatibility) po
Summary of the content on the page No. 5
Following information is for EU-member states only: This product is marked according to the requirement in EU-Directive 2002/96/EC. (Directive on Waste electrical and electronic equipment - WEEE) The use of the symbol indicates that this product may not be disposed as unsorted municipal waste and has to be collected separately. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health, which could otherwise
Summary of the content on the page No. 6
Before Reading This Manual Lineup of our manuals These manuals are provided for the operation of the e-STUDIO166/206. Select and read the manual best suited to your needs. This manual is the Operator’s Manual for Copying Func- tions. Operator’s Manual for Copying Functions (Booklet, This manual) This manual describes the basic operations, mainly copying functions, of this equipment. It also describes safety precautions to ensure correct and safe use of this equipment. Be sure to read this bef
Summary of the content on the page No. 7
How to read this manual Signal in this manual To ensure correct and safe use of this equipment, this operator’s manual describes safety pre- cautions according to the three levels shown below. You should fully understand the meaning and importance of these items before reading this manual. Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or serious damage, or fire in the equipment or sur- rounding assets. Indicates a potentially hazardou
Summary of the content on the page No. 8
Trademarks Microsoft and Windows are the trademarks of Microsoft Corporation in the US and other countries. Adobe, Acrobat, Adobe Reader and Adobe Acrobat Reader are the trademarks of Adobe Systems Incorporated. Other company or product names shown in this manual may be a brand name or a trade- mark of each company. ©2007 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of TOSHIBA TEC CORPORA
Summary of the content on the page No. 9
CONTENTS Preface...........................................................................................................1 Notice to Users .............................................................................................2 Before Reading This Manual .......................................................................4 TOSHIBA Quality Is Second to None........................................................11 Features of e-STUDIO166/206 ............................................
Summary of the content on the page No. 10
Bypass copying on standard size paper..................................................55 Chapter 3 COPYING FUNCTIONS Default Settings ..........................................................................................60 Paper Selection...........................................................................................61 Automatic paper selection (APS).............................................................61 Manual paper selection .............................................
Summary of the content on the page No. 11
Cleaning charger ...................................................................................101 Cleaning transfer charger......................................................................102 Chapter 7 SPECIFICATIONS AND OPTIONS e-STUDIO166/206 Specifications ............................................................106 Continuous copying speed ....................................................................107 Specifications of Options ..........................................
Summary of the content on the page No. 12
10 CONTENTS
Summary of the content on the page No. 13
TOSHIBA Quality Is Second to None Recommended toner cartridges To assure optimal printing performance, we recommend that you use TOSHIBA toner cartridges. If you use a TOSHIBA-recommended toner cartridge, you can utilize the following two check functions of this equipment: Cartridge detecting function: This function checks if the toner cartridge is correctly installed and notifies you if it is not. Toner remaining check function: This function notifies you when there is little toner remaining i
Summary of the content on the page No. 14
Supplies / Parts Dependability Genuine TOSHIBA supplies are subjected to the strictest of inspections so that every supply you receive will perform at optimal levels. High Productivity Genuine TOSHIBA supplies are created to meet the demands of our competitive world and pro- vide high-speed reliable copies when you need them. Stable Image Quality Genuine TOSHIBA supplies are designed to provide consistently stable image output. Copier Friendly Supplies Genuine TOSHIBA supplies are designed to h
Summary of the content on the page No. 15
Features of e-STUDIO166/206 The e-STUDIO166/206 is a space-saving, black-and-white copier. The copying speed of the *1 *1 e-STUDIO166 is 16 copies per minute and that of the e-STUDIO206 is 20 copies per minute . *2 Both of them can be a printer when they are connected to your PC with a USB cable. Lightweight and space-saving equipment with more emphasis on basic functions The receiving tray is relocated to the equipment’s inner side, occupying as little space as possible. *3 Its weight has
Summary of the content on the page No. 16
General Precautions When installing or moving Warning This equipment requires 220 to 240 V AC, 8 A 50/60 Hz electric power. Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. This could cause a fire or give you an electric shock. If you are considering increasing the number of outlets, contact an electrician. Always connect this equipment to an outlet with an earth connection to avoid the danger of fire or electric shock in case
Summary of the content on the page No. 17
Caution Avoid placing the equipment in a place unsuitable for its weight and also make sure the sur- face is level. Remember that if the equipment falls over, serious injuries could result. Weight of the equipment: approx. 33.7 kg. When removing the plug from the outlet, do not pull the power cable. Always hold the plug when removing it from the outlet. If the power cable is pulled, the wires may become broken and this could cause a fire or give you an electric shock. Make sure that the ven
Summary of the content on the page No. 18
When using the equipment Warning Do not take off the cover of the equipment; otherwise you could be injured or get an electric shock. Do not remove or connect the plug with wet hands, as this could give you an electric shock. Do not place any container with liquid (flower vases, coffee cups, etc.) on or near the equip- ment. This could cause a fire or give you an electric shock. Keep paper clips and staples away from the air vent. If not, a fire could result or you could get an electric sh
Summary of the content on the page No. 19
Position of Certification label, etc. Explanatory label Identification label Warning label Warning for high-temperature areas (ventilation holes) Warning for high-temperature areas (fuser unit) General Precautions 17
Summary of the content on the page No. 20
Other points Do not turn the power OFF with jammed paper left inside the equipment. This could cause malfunctions when the main switch is turned ON next time. Be sure to turn the power OFF when leaving the office or if there is a power failure. Be careful because the paper exit area and paper just after exiting are hot. Do not place anything other than paper on the receiving tray. This could disturb a normal operation and cause malfunctions. Do not touch the photoconductive drum surface o
