Summary of the content on the page No. 1
59389401_cvr.jpg
Summary of the content on the page No. 2
Copyright Information Copyright © 2007 by Oki Data. All Rights Reserved Document Information ___________________ Microline 1120 Users Guide P/N 59389401, Revision 1.1 April, 2007 Disclaimer_____________________________ Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. The manufacturer assumes no responsibility for the results of errors beyond its control. The manufacturer also cannot guarantee that changes in software and equip
Summary of the content on the page No. 3
Contents Parts of the Printer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Front View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Back View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Bottom View. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Buttons . . . . . . . . . . . . . . . . . . . . . .
Summary of the content on the page No. 4
Move Continuous Forms Up for Tear Off. . . . . . . . . . . . . . . . . 40 Printhead Gap. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Adjusting the Head Gap . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42 Paper Jams, Individual Sheets . . . . . . . . . . . . . . . . . . . . . . . 42 Paper Jams, Continuous Forms. . . . . . . . . . . . . . . . . . . . . . . 42 Part Numbers .
Summary of the content on the page No. 5
Parts of the Printer Front View F1_24_front.jpg 1 10 2 9 3 8 7 4 6 5 1. Sheet Guide 2. Paper Support 3. Paper Lever 4. Platen Knob (do not use) 5. Head Gap Lever 6. Printhead 7. Control Panel 8. On/Off Switch 9. Ribbon Cartridge 10. Cover, Top Assembly Microline 1120 Users Guide 5
Summary of the content on the page No. 6
Back View F1_24_back.jpg 1 2 1. Tractors 2. Power Cord Connector Microline 1120 Users Guide 6
Summary of the content on the page No. 7
Bottom View F1_24_bottom.jpg 3 1 2 1. Parallel Port 2. USB Port 3. RS-232C Serial Port Microline 1120 Users Guide 7
Summary of the content on the page No. 8
Control Panel Buttons panel.jpg Button Print mode Menu mode Other SEL Toggles the printer on Scrolls through the Held at power and off line menu groups up, places printer in Menu mode LF/FF Advances the paper one When entering Menu SEL + LF/FF line. Held down, mode, prints the first selects font advances paper to the line. Scrolls through next top of form or ejects the menu items. single sheet from the printer LOAD/ No paper loaded: feeds When entering Menu SEL + LOAD/ paper. m
Summary of the content on the page No. 9
Button Print mode Menu mode Other LOAD/ Forward fine line feed for Top of Form setting EJECT (printer deselected) +SEL TEAR + Reverse fine line feed for SEL Paper Tear setting TEAR + Forward fine line feed for LF/FF Paper Tear setting Lights panel.jpg Light Status, Function SEL On = Printer is on line Off = Printer is off line Flashing = Flashes with ALARM light to indicate a fault has been detected ALARM On, SEL light off = paper out Flashing = paper jam Flashing, SEL light
Summary of the content on the page No. 10
Print Modes Change Print Mode You can change print modes directly from the front panel. Hold down the SEL button and press the button indicated below. The printer will cycle through the choices as indicated by the two STATUS lights. When you release the buttons the selection is set. Nota During normal operation, the status lights show the font selection. panel.jpg STATUS Light Button combination Printing style combination Left Right SEL + LF/FF Font Near Letter Quality On Utili
Summary of the content on the page No. 11
Menus The printer has an internal menu containing a number of default parameters which can be set to enable your printer to match the parameters required by your computer. Entering the Menu Mode To enter the Menu Mode, press SEL while turning on the printer. Changing Menu Settings 1. Press SEL while turning on the printer. 2. Change settings: a. Press SEL to select the relevant group that needs to be changed (the group is the left-hand column on the Menu printout). b. Press LF/FF to select th
Summary of the content on the page No. 12
Groups, Items, and Settings Each Group includes multiple Items, each of which has selectable Settings. Group Item 1 Setting 1
Setting X
Setting 1
Setting X Item X Setting 1
Setting X List of Menu Groups Printer Control: see page 12 Font: see page 13 Symbol Sets: see page 14 Rear Feed: see page 15 Bottom Feed: see page 17 Top Feed: see page 18 Set-Up: see page 20 Parallel I/F: see page 22 Serial I/F: see page 23 Printer Control Nota The defa
Summary of the content on the page No. 13
Font Nota The default setting is in bold blue italic type. Item Settings Print Mode Utility NLQ Courier NLQ Gothic DRAFT DRAFT Mode HSD SSD Pitch 10 CPI 12 CPI 15 CPI 17.1 CPI 20 CPI Proportional Spacing No Yes Style Normal Italics Size Single Double * * Selects double width and double height characters. Microline 1120 Users Guide 13
Summary of the content on the page No. 14
Symbol Sets Nota The default setting is in bold blue italic type. Item Settings Character Set Standard Line Graphics Block Graphics (ML emulation only) Set I (IBM emulation only) Set II (Epson emulation only) Language Set American French German British Danish 1 Swedish Italian Spanish I Japanese Norwegian Danish II Spanish II Latin American French Canadian Dutch Publisher Zero Character Slashed Unslashed Code Page USA Canada French Multilingual Portugal Norway B
Summary of the content on the page No. 15
Rear Feed Nota The default setting is in bold blue italic type. Item Settings Line Spacing 6 LPI 8 LPI Form Tear-off Manual 0.5 sec 1.0 sec 2.0 sec Note: The Form Tear Off feature allows you to advance continuous forms to the stacker for tear off. When Form Tear-off is activated (on), the paper will advance to the tear bar position AFTER the printer has been idle for the selected interval (0.5, 1, or 2 seconds). When more data is received and processed by the printer, the paper
Summary of the content on the page No. 16
Item Settings TOF adjust - 20 ~ - 1 (continuous) 0 + 1 ~ +20 Continuous paper top of 2.12 mm (1/12) form 4.23 mm (2/12) 6.35 mm (3/12) 8.47 mm (4/12) 10.58 mm (5/12) 12.70 mm (6/12) 14.82 mm (7/12) 16.93 mm (8/12) 19.05 mm (9/12) 21.17 mm (10/12) 23.28 mm (11/12) 25.40 mm (12/12) 27.52 mm (13/12) User Top of Form Microline 1120 Users Guide 16
Summary of the content on the page No. 17
Bottom Feed Nota The default setting is in bold blue italic type. Item Settings Line Spacing 6 LPI 8 LPI Skip Over Perf. No 25.4 mm (1) Page Length 279.4 mm (11") 296.3 mm (11.67") 304.8 mm (12") 355.6 mm (14") 431.8 mm (17") 127.0 mm (5) 76.2 mm (3") 82.6 mm (3.25") 84.7 mm (3.33) 88.9 mm (3.5") 93.1 mm (3.67) 101.6 mm (4) 139.7 mm (5.5") 152.4 mm (6") 177.8 mm (7") 203.2 mm (8") 215.9 mm (8.5") Microline 1120 Users Guide 17
Summary of the content on the page No. 18
Top Feed Nota The default setting is in bold blue italic type. Item Settings Line Spacing 6 LPI 8 LPI Page Length 279.4 mm (11") 296.3 mm (11.67") 304.8 mm (12") 355.6 mm (14") 431.8 mm (17") 127.0 mm (5) 76.2 mm (3") 82.6 mm (3.25") 84.7 mm (3.33) 88.9 mm (3.5") 93.1 mm (3.67) 101.6 mm (4) 139.7 mm (5.5") 152.4 mm (6") 177.8 mm (7") 203.2 mm (8") 215.9 mm (8.5") Top Feed Wait Time Invalid 0.5 sec 1.0 sec 2.0 sec Page Length Control by Menu Setting by Actual Page L
Summary of the content on the page No. 19
Item Settings Cut Sheet top of form 2.12 mm (1/12) 4.23 mm (2/12) 6.35 mm (3/12) 8.47 mm (4/12) 10.58 mm (5/12) 12.70 mm (6/12) 14.82 mm (7/12) 16.93 mm (8/12) 19.05 mm (9/12) 21.17 mm (10/12) 23.28 mm (11/12) 25.40 mm (12/12) 27.52 mm (13/12) User Top of Form Cut Sheet LF adjust - 14 ~ - 1 0 + 1 ~ + 14 Microline 1120 Users Guide 19
Summary of the content on the page No. 20
Set-Up Nota The default setting is in bold blue italic type. Item Settings Graphics Bi-directional Uni-directional 7 or 8 Bits Graphics 8 (ML emulation only) 7 Receive Buffer Size 1 Line 32 K 64 K Paper Out Override No Yes Print Registration 1 - 10 ~ - 1 0 + 1 ~ + 10 Print Registration 2 - 10 ~ - 1 0 + 1 ~ + 10 Print Registration 3 - 10 ~ - 1 0 + 1 ~ + 10 7 or 8 Bits Data Word 8 (ML emulation only) 7 Operator Panel Function Full Operation Limited Op
