Summary of the content on the page No. 1
®
magicolor 2200
DeskLaser
User’s Guide
1800622-001A
Summary of the content on the page No. 2
Trademarks The following are registered trademarks of MINOLTA-QMS, Inc.: QMS, the MINOLTA-QMS logo, and magicolor. Minolta is a trademark of Minolta Co., Ltd. Other product names mentioned in this manual may also be trademarks or registered trademarks of their respective owners. Proprietary Statement The digitally encoded software included with your printer is Copyrighted © 2000 by MINOLTA- QMS, Inc. All Rights Reserved. This software may not be reproduced, modified, displayed, transferred,
Summary of the content on the page No. 3
Contents 1 Replacing Consumables Consumable Life Expectancies .......................................................................2 Replacing Consumables ...................................................................................2 Ordering Consumables 3 Replacing Toner Cartridges ...........................................................................3 Toner Cartridge Life 4 Toner Cartridge Handling 5 Toner Cartridge Replacement 5 Refilled Toner Cartridges 7 Replacing the OPC Drum,
Summary of the content on the page No. 4
Replacing the Fuser Unit and Transfer Roller Kit .....................................17 Replacing the Fuser Unit 17 Replacing the Transfer Roller Unit 21 Replacing the Fuser Oil Roller .....................................................................24 Replacing the Transfer Belt ..........................................................................26 2 Using Media Introduction.....................................................................................................34 Media H
Summary of the content on the page No. 5
32-bit SuperDriver Setup ...............................................................................55 Printer Driver Controls for Windows Me/2000/NT4/98/95 55 Configuring Paper Options 56 Configuring Page Layout Options 63 Configuring Image Options 70 Configuring Device Options 74 Information on the About Tab 75 Sharing the Printer .........................................................................................75 Using the Crown Print Monitor .......................................
Summary of the content on the page No. 6
Clearing Media Jams .....................................................................................94 Handling Media Jams by Location 94 Clearing Misfeed (Upper or Optional Tray) Jams 95 Clearing Misfeed (Multipurpose Tray) Jams 96 Clearing Inner Jams, Outer Jams, and Drum Jams 97 Clearing Jams from the Output Tray 104 Solving Problems with Media Jams ............................................................105 Solving Other Problems ...................................................
Summary of the content on the page No. 7
7 CrownView CrownView ....................................................................................................156 Setting up the Printer Web Page .................................................................157 Determining the Printer Name 157 Setting Up Your Browser Software 157 Printer Summary Page.................................................................................161 Consumable Status Page ...........................................................................
Summary of the content on the page No. 8
Engine and Controller Specifications .........................................................180 Engine 180 Print Speed—Simplex 180 Print Speed—Autoduplex 180 General 181 Controller 181 Electrical 182 Environmental 183 Physical 184 Print Media ...................................................................................................184 Index vi Contents
Summary of the content on the page No. 9
Replacing Consumables 1
Summary of the content on the page No. 10
Consumable Life Expectancies The stated life expectancy of each consumable is based on printing under specific operating conditions, such as media type, number of color planes, page size, and page coverage (@ normal 5% coverage of letter/A4-size media). The actual life expectancy will vary depending on these and other printing variables, including continuous or intermittent printing, higher than normal coverage, ambient temperature, and humidity. Replacing Consumables Attention User’s Guid
Summary of the content on the page No. 11
Item/Message Display This item needs replacing by user after... Page Reference Toner Approximately 6,000 single-sided pages per “Replacing Toner TONER EMPTY cartridge—black, yellow, magenta, cyan at Cartridges” on 5% coverage of each color. page 3 Transfer belt 100,000 single-sided images (1:1 color/ “Replacing the REPLACE TRANSFER BELT monochrome printing). Transfer Belt” on page 26 *A plane (also called an image) is a single pass of the OPC drum (one toner color). For example, a b
Summary of the content on the page No. 12
uses four toner cartridges: black, yellow, magenta, and cyan. Handle the toner cartridges carefully to avoid spilling toner inside the printer or on yourself. The carbon-particle toner is nontoxic. If you get toner on your hands, wash them in cool water or a neutral detergent. If you get toner on your clothes, lightly dust them off as much as possible. If some toner remains on your clothes, use cool, not hot water, to rinse the toner off, provided your clothing is washable. Attention If y
Summary of the content on the page No. 13
Toner Cartridge Handling Attention Do not hold a toner cartridge vertically. Do not touch the toner roller surface or the protective shutter . This could lower image quality. Keep toner cartridges: In their packaging until you’re ready to install them In a cool, dry location away from sunlight (due to heat) The maximum storage temperature is 95° F (35° C) and the maximum storage humid- ity is 80% without condensation. Level during storage Do not stand or store cartridges on thei
Summary of the content on the page No. 14
If the toner cartridge you want to replace is the one showing, go to step 5. If not, go to step 3. 3 Press the toner cartridge carousel button and release the button before turning the car- ousel dial counterclockwise until 2 it stops. 1 The carousel rotates 90° and stops. 3 The toner cartridge carou- sel may start to turn auto- matically from the weight of the inserted toner cartridge. Make sure you have fully turned to the next slot before trying to insert another toner cartridge
Summary of the content on the page No. 15
7 Distribute the toner inside the cartridge. Holding a cartridge with both hands, gently shake it five or six times. Each toner cartridge has a colored end that corresponds to a colored label inside the cartridge slots. Always install the toner cartridge in the slot with a label of the same color. 8 Place the front end of the toner cartridge installa- tion guides into the car- tridge installation rails on the cartridge carousel. 9 Gently push the new car- tridge into the printer. 10 Cl
Summary of the content on the page No. 16
Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack Attention The OPC drum is extremely sensitive to bright light and direct sunlight. Always leave it in its protective bag until you’re ready to install it. Any exposure to light should be avoided, or permanent damage could result. Any damage resulting from mishandling of the OPC drum will void the warranty of the OPC drum. Also, handle the cartridge carefully by its sides so you don’t touch the surface (the green part) of the d
Summary of the content on the page No. 17
Removing the laser lens cover Installing the laser lens cover Installing the new OPC drum cartridge Installing the new waste toner pack Removing the Used Waste Toner Pack When the waste toner pack is nearly full, the message “WASTE TONER NEAR FULL” appears. Prepare to replace the entire OPC drum kit. 1 Turn off the printer. 2 Open the printer’s front cover. 3 Carefully remove the waste toner pack using the handle. Keep the waste toner pack upright so the toner does not spill. Replac
Summary of the content on the page No. 18
4 Turn the two caps labeled “A” counterclockwise and remove them. AA Twist the two “A” caps 5 onto the two holes labelled “A.” 2 Turn the caps clockwise A 2 1 1 to secure them. 1 1 2 2 A 10 Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack
Summary of the content on the page No. 19
6 Remove waste toner pack cap labeled “B” and insert it into hole “B.” 7 Dispose of the used B waste toner pack. Dispose of it properly according to your local regulations (do not dispose of it by burning). 8 Continue with replacing the OPC drum cartridge. Reinstall the new waste toner pack after replac- ing the OPC drum. Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack 11
Summary of the content on the page No. 20
Removing the Used OPC Drum Cartridge 1 With the front cover open, rotate the transfer belt unit left release lever counterclockwise to the top (12 o’clock) position. This raises the transfer belt unit. 2 Hold the OPC drum car- tridge handle with your left hand and carefully pull it out about 8 inches (20 cm). 12 Replacing the OPC Drum, Laser Lens Cover, and Waste Toner Pack
