Summary of the content on the page No. 1
DIGITAL COLOUR PRINTER
MODEL
CP3020DE
OPERATION MANUAL
THIS OPERATION MANUAL IS IMPORTANT
TO YOU.
PLEASE READ IT BEFORE USING YOUR
DIGITAL COLOUR PRINTER.
This digital colour printer complies with the requirements of the EC
Directive 89/336/EEC, 73/23/EEC and 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that
gains proper operation in residential areas, on business and light
industrial premises and on small-scale enterprises, inside as well as
outside of the buildin
Summary of the content on the page No. 2
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING CONTENTS Contents ................................................................................................ 1 Safety precautions ................................................................................ 2-4 Special features .................................................................................... 5 Unpacking ............................................................................................. 6
Summary of the content on the page No. 3
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING SAFETY PRECAUTIONS In the interest of safety, please observe the following precautions: POWER REQUIREMENT This product is designed for operation on 220-240V AC 50/60Hz. Never connect to any outlet or power supply having a different voltage or frequency. WARNING: THIS APPARATUS MUST BE GROUNDED. AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE. PROTECTIVE MEASURES IF ABNORMALITIES ARISE, .... If the printer emits smoke or
Summary of the content on the page No. 4
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING INSTALLATION LOCATIONS MAINTAIN GOOD VENTILATION Ventilation slots and holes are provided on the rear of this unit. Place the unit on a hard and level surface and locate at least 17 cm (6.7 inches) (top) and 5 cm (2 inches) (sides), from walls to insure proper ventilation. When installing the unit in a system rack, leave space between the unit and the back of the rack. UNSUITABLE LOCATIONS Avoid installing the printer in uns
Summary of the content on the page No. 5
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING SAFETY PRECAUTIONS OTHER CAUTIONS Dust or other foreign matter adhering to the print paper or the ink cassette, or deformation resulting from exposure to extremely low or high temperatures could cause loss of colour, uneven colour or lines, or wrinkles in the print images. NOTE: MEMORIZED IMAGES ARE STORED IN VOLATILE MEMORY AND MAY BE LOST IN THE EVENT OF POWER FLUCTUATION OR MALFUNCTION. 4
Summary of the content on the page No. 6
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING SPECIAL FEATURES SPECIAL FEATURES 2 PRINT SIZES ARE AVAILABLE DEPENDING ON INK SHEET 2 printing sizes are available depending on the 3-color YMC ink sheet being used. There are 2 types of ink sheet, matte and gloss, to achieve the print finish required. PRINTER DRIVER ® ® ® ® The printer driver supports Windows 98, Windows Me, Windows 2000 and Windows XP. PRINTING This printer employs cut paper. Printing speed is approx. 77 se
Summary of the content on the page No. 7
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING UNPACKING UNPACKING Take the unit out of the box by the following procedures. Make sure to check the contents. 11 1 11 Open the top of the box and remove the cardboard. 22 2 22 Remove the cushion with its contents. Be careful not to drop the contents. 3 3 3 Take the unit out of the box carefully. 3 3 Make sure to keep the unit horizontal. 44 4 44 Unwrap the packing. Save the packaging in case you need to ship the printer. 2 2
Summary of the content on the page No. 8
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION SHOOTING FEATURES & FUNCTIONS FRONT PANEL 6 5 7 4 8 3 2 9 1 1 1 7 7 1 1 1 POWER BUTTON 7 7 7 CANCEL BUTTON Press to turn on power. Press again to turn off power. Press to cancel continuous printing. See page 8 for When the power is turned on, POWER indicator illuminates. continuous printing. 22 2 22 POWER INDICATOR 88 8 88 OPEN BUTTON When the unit is turned on, this lamp lights up. Press to open the top cover. Open the top cover when
Summary of the content on the page No. 9
TROUBLE- OTHERS PRECAUTIONS FEATURES CONNECTIONS PREPARATION SHOOTING FEATURES & FUNCTIONS REAR PANEL 1 2 1 1 1 1 1 USB PORT Use this terminal to connect the unit to a device equipped with USB interface such as a personal computer. See page 9 for connection. 22 2 22 AC LINE SOCKET Connects to the provided power cord. Insert the cord firmly. CANCELLING CONTINUOUS PRINTING When printing two or more copies of one image, you can use continuous printing. The number of the copies can be set by the p
Summary of the content on the page No. 10
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING CONNECTIONS CONNECTION WITH USB INTERFACE 22 2 22 CONNECTING WITH A PERSONAL COMPUTER 1 1 1 1 1 Make sure to turn off the personal computer. 22 2 22 Connect this unit with the personal computer as following example. To USB port To USB port Personal computer Printer 33 3 33 Connect the power cord. 22 2 22 Use the printer driver to adjust settings for the printer. The printer driver is included in the CD-ROM. See page 15 for the
Summary of the content on the page No. 11
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING POWER POWER BEFORE OPERATION Before printing, 1. Remove the shipping inserts on both sides of the paper tray inserting slot and the spacer inside the paper tray. (See below) 2. Install the ink cassette with the ink sheet installed. (page 11) 3. Install the paper tray with print paper installed. (pages 12-13) 4. Install printer driver. PAPER SHEET SET Make sure to use the following types of paper sheet and ink sheet set. 22 2 2
Summary of the content on the page No. 12
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING INSTALLATION OF INK SHEET 22 2 22 INSTALLATION OF INK SHEET Install the ink sheet (option: supplied with paper sheet set) to the ink cassette before inserting the ink cassette into the printer. 11 1 11 Press OPEN button to open the top cover. 22 2 22 If necessary, push the old ink cassette to the left and lift it up to remove it. NOTE Images remain on the ink sheet after printing. If you are working with confidential document
Summary of the content on the page No. 13
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING BEFORE OPERATION INSTALLATION OF PRINT PAPER The paper tray adjusts to the size of the paper you are installing. Do not force paper that is too long or too wide into the tray. NOTE • Use only the tray designed for this printer. • A spacer for protection during transport is attached inside the paper tray when the Plate lever printer is shipped from the factory. Remove this spacer when using the printer. 11 1 11 Pull down the pl
Summary of the content on the page No. 14
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING Remove the cardboard. 5 5 5 Remove the cardboard. 5 5 NOTE • You can load only one pack of print paper supplied as paper sheet set. When adding the paper, take care not to exceed the red line on the paper tray. (50 sheets max.) Take care not to exceed the red line when adding the paper. 66 6 66 Set the paper cover onto the paper tray. 7 7 7 7 7 Install the paper tray in the printer. 88 8 88 Raise the stopper. 13
Summary of the content on the page No. 15
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING BEFORE OPERATION USAGE AND STORAGE OF PAPER SHEET SET 2 BEFORE PRINTING • Fingerprints or dust on the paper’s surface may degrade print quality and cause paper jams. • When print paper is rapidly transferred from a cool place to a hot place, vapour or dew will be generated on the paper’s surface causing paper jams or degraded print quality. Leave the print paper in the room to stabilize its temperature before use. • When prin
Summary of the content on the page No. 16
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING INSTALLING PRINTER DRIVER The printer driver is required to print the data from a personal computer connected with this unit. ® The printer driver for Windows is supplied with this unit. Product name Operating conditions ® ® ® CPD3020W Applies for Microsoft Windows 98 and Windows Me ® ® ® CPD3020N0 Applies for Microsoft Windows 2000 and Windows XP Refer to the “Read me” in the CD-ROM for installing the printer driver. ® ® ® ®
Summary of the content on the page No. 17
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING TROUBLESHOOTING INDICATION ON THE FRONT PANEL & COUNTERMEASURES If for some reason printing is not possible or error occurs during printing, the indicators on the front panel will be lit. In this case, follow the procedure described below. : lit : blinks : not lit Causes Countermeasures ALARM MEDIA DATA READY Paper is used up. • Install a new set of paper. Paper is not installed. Refer to pages 12-13. The ink sheet is not inst
Summary of the content on the page No. 18
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING BEFORE CALLING FOR SERVICE 2 Use the following troubleshooting chart to try to resolve any apparent defect in operation. If you are unable to resolve the problem, unplug the power cord and contact your dealer. Symptom Check and Remedy No power Is the power cord plug disconnected from the outlet? (when POWER lamp does not illuminate) →Connect the power cord plug to the outlet firmly. After turning the power off, wait for appro
Summary of the content on the page No. 19
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING TROUBLESHOOTING OVERCOMING PAPER JAMS 2 2 2 CLEARING A PAPER JAM FROM THE INK CASSETTE AREA 2 2 11 1 11 Press POWER button to turn off the printer. 22 2 22 Press OPEN button to open the top cover. 33 3 33 Remove the ink cassette. Push the ink cassette to the left and lift up to remove. 44 4 44 Pull out the jammed paper. Do not touch the thermal head right after printing as it is hot. Touching it may cause a burn or injury. 55
Summary of the content on the page No. 20
TROUBLE- PRECAUTIONS FEATURES CONNECTIONS PREPARATION OTHERS SHOOTING REPAIRING A TORN INK SHEET 11 1 11 Position the ink cassette with the torn ink sheet on a flat, clean surface. 2 2 2 2 2 Place a piece of office tape on the center of the ink sheet. Office tape Supply spool Takeup spool 33 3 33 Wind the takeup spool counterclockwise so that the office tape is not seen and the ink sheet is straight. 44 4 44 Install the repaired ink cassette in the printer. 19
