IBM INFOPRINT HI-LITE COLOR 4005-HC2 user manual

Summary of the content on the page No. 1

InfoPrint Hi-Lite Color 4005-HC2 IBM
InfoPrint Hi-Lite Color
4005 HC1 to 4005 HC2
Upgrade
-

Summary of the content on the page No. 2

Summary of the content on the page No. 3

InfoPrint Hi-Lite Color 4005-HC2 IBM InfoPrint Hi-Lite Color 4005 HC1 to 4005 HC2 Upgrade -

Summary of the content on the page No. 4

Note First Edition (June 1998) The following paragraph does not apply to any other country where such provisions are inconsistent with local law. INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this

Summary of the content on the page No. 5

Related Publications The following is a listing of related publications for Advanced Function Presentation. v PPFA User’s Guide, S544–5284 v AFP Toolbox for Multiple Operating Systems User’s Guide, S544–5292 v An extensive listing of available publications is included in Advanced Function Presentation: Printer Information, G544-3290 and Guide to Advanced Function Presentation, G544-3876. v DCF User’s Guide , S544-3191 v OGL User’s Guide , S544-3702 v AFP Programming Guide and Line Data Reference

Summary of the content on the page No. 6

iv Upgrade Hi-Lite Color to HC2

Summary of the content on the page No. 7

HC1 to HC2 Upgrade The information contained in this document is to be used by customers who are planning to upgrade their InfoPrint Hi-Lite Color 4005 HC1 to a InfoPrint Hi-Lite Color 4005 HC2. The HC1 has eight 1.27 mm (0.4 inch) printheads with 96 inkjets each and the HC2 has eight 2.72 cm (1.06 inch) printheads with 256 inkjets each . The upgrade affects the following: 1. Applications 2. Supplies and Features 3. Installation Applications and Machine Setup The HC1 applications are compatible

Summary of the content on the page No. 8

v Leaving the HC1 in its current location during the upgrade installation. This would require the InfoPrint 4000 to use its own stacker during the entire upgrade. 2. A working area to accommodate the installation 3302 mm x 3633 mm (130 inch x 143 inch) must be provided. 3. Additional area, large enough to accommodate unpacking and storing upgrade parts (approximately 3048 mm x 3048 mm (120 inch x 120 inch) must be provided. 2 Upgrade Hi-Lite Color to HC2

Summary of the content on the page No. 9

Summary of the content on the page No. 10

IBMR Printed in the United States of America on recycled paper containing 10% recovered post-consumer fiber. -