Summary of the content on the page No. 1
EPSON Stylus COLOR 900N
Media
sheet feeder
paper support
Paper name Size Part number
EPSON 360 dpi Ink Jet Letter S041060
right edge guide
Paper
A4 (8.3 x 11.7 inches) S041059
left edge
printer
EPSON High Quality Ink Letter S041111
guide
cover
Jet Paper
A4 (8.3 x 11.7 inches) S041117
EPSON Photo Quality Ink Letter S041062
Jet Paper
A4 (8.3 x 11.7 inches) S041061
output
tray
Legal S041067
EPSON Photo Quality Ink A6 (4.1 x 5.8 inches) S041054
Jet Cards
8 x 10 inches S041122
EPSON Photo Paper 4
Summary of the content on the page No. 2
EPSON Stylus COLOR 900N Paper Paper type Size Paper types Thickness Weight Single sheets Letter (8.5 × 11 inches) Plain paper and special ink 0.003 to 0.004 inch 17 to 24 lb 2 A4 (210 × 297 mm) jet papers distributed by (0.08 to 0.11 mm) (64 to 90 g/m ) A5 (148 × 210 mm) EPSON B5 (182 × 257 mm) Legal (8.5 × 14 inches) Half letter (5.5 × 8.5 inches) Executive (7.5 × 10 inches) Transparencies and Letter (8.5 × 11 inches) Transparencies and glossy —— glossy film A4 (210 × 297 mm) film distribute
Summary of the content on the page No. 3
EPSON Stylus COLOR 900N Printable Area Ink Cartridges A Single sheets Black ink cartridge Color ink cartridge and cards Specification (T003011) (T005011) Color(s) Black Cyan, magenta, and BL BR yellow Print capacity* 1,200 pages (A4, ISO/IEC 570 pages (A4, 5% 10561 letter pattern); coverage at 360 dpi) 840 pages at 5% C1 C2 coverage at 360 dpi) Cartridge life 2 years from production date and up to within 6 months after opening package at 77 °F (25 °C) Envelopes Storage –4 to 104 °F (–20 to
Summary of the content on the page No. 4
EPSON Stylus COLOR 900N Reverse channel Electrical Specification Description Specification 120 V Model 240 V Model* Transmission mode IEEE-1284 Nibble mode Input voltage range 99 to 132 V 198 to 264 V Adaptable connector 57-30360 Amphenol connector or equivalent Rated frequency range 50 to 60 Hz Synchronization Refer to the IEEE-1284 specification Input frequency range 49.5 to 60.5 Hz Handshaking Refer to the IEEE-1284 specification Signal level IEEE-1284 Level 1 device Rated current 0.7 A 0.4 A
Summary of the content on the page No. 5
EPSON Stylus COLOR 900N Ethernet Card Specifications Control Panel Your EPSON Type B Ethernet Interface Card (C823632) lets The four lights on your printer’s control panel show the you connect the printer directly to your network. printer’s status and alert you to problems like paper jams. link selection light paper out light status sheet black ink status lights button out light power color ink light out light cleaning button power button 10BaseT/100BaseTX connectors
Summary of the content on the page No. 6
EPSON Stylus COLOR 900N 6. Place the black ink cartridge in its holder with the label Installing an Ink Cartridge for the First facing up and toward the back of the printer. Then press Time down the clamp until it locks into place. 1. Plug the power cord into a grounded outlet. Don’t use an outlet controlled by a wall switch or timer, or one that uses the same circuit as a large appliance. This may disrupt the power, which can erase the printer’s memory or damage its power s
Summary of the content on the page No. 7
EPSON Stylus COLOR 900N The printer prints one page showing its ROM version The red and green lights represent the following: number, ink counter, and a nozzle check pattern in black, Red Green Status magenta, cyan, and yellow. Only the nozzle check pattern is Flash simultaneously Initializing status at power on or reset shown below. Off Flashes Printing data or the status sheet slowly Off Flashes Sending and receiving packets rapidly Off On Normal ready status On Off Error status 5. To end
Summary of the content on the page No. 8
EPSON Stylus COLOR 900N ❏ Use ink jet papers within one year of purchase. Use glossy Printing on Special Media film and transparencies within six months. Return unused sheets and envelopes to their original packages as soon as Whether you print on plain paper or special media, you need possible. See “Paper” on page 2 for more media storage to make sure you select the correct Media Type setting in the information. printer software, as shown in the following table: ❏ Set the thickness lev
Summary of the content on the page No. 9
EPSON Stylus COLOR 900N 7. Lower the new ink cartridge into its holder with the label Removing and Installing Ink Cartridges facing up and toward the back of the printer. You can replace a cartridge when the B black or A color ink out light is either flashing or on. (If you perform these steps when both ink out lights are off, the printer cleans the print heads as described on page 10.) Follow these steps to replace ink cartridges: 1. Remove the new ink cartridge from its packagin
Summary of the content on the page No. 10
EPSON Stylus COLOR 900N 3. Make sure the printer is turned on and not printing, then 10. Press the E load/eject button. The print head moves to the open the printer cover. color ink cartridge replacement position. If you need to replace the color ink cartridge, repeat steps 6 through 9. 4. Press the E load/eject button and hold it down for three Then continue with step 11. seconds until the print head moves to the left to the black ink cartridge replacement position and the Pp
Summary of the content on the page No. 11
EPSON Stylus COLOR 900N Never turn off the printer while the P power light is 8. If you don’t see any improvement after cleaning two or flashing, unless the printer hasn’t moved or made noise three times, then try the suggestions in “Problems and for more than 5 minutes. Solutions” in the Start Here book or “Troubleshooting” in the EPSON Stylus COLOR 900N Manual. 6. When the P power light stops flashing, run a nozzle check to test the results and reset the cleaning cycle. Examinin
Summary of the content on the page No. 12
EPSON Stylus COLOR 900N 5. Follow the instructions on the screen to print a test page Transporting the Printer and select the correct alignment. If you move your printer some distance, you need to prepare it Aligning the Print Head Using the Control for transportation in its original box. Follow these steps: Panel Buttons To avoid damage, always leave the ink cartridges If you cannot use the print head alignment utility program installed when transporting the printer. that came with
