Summary of the content on the page No. 1
Summary of the content on the page No. 2
CBM-710/720/730/750 User’s Manual Declaration of Conformity Manufacturer’s Name : Japan CBM Corporation Manufacturer’s Address: CBM Bldg., 5-68-10, Nakano, Nakano-ku Tokyo, 164-0001, Japan Declare the Product Product Name: Dot Matrix Printer Model Number(s): CBM-710,720,750 Series (CBM-710R, CBM-710P, CBM-720R, CBM-720P, CBM-750R, CBM-750P) (S.No.0090001 ~ ) Conform to the following Standards: LVD: : EN60950 : A4:1997 EMC: : EN55022 : 1998 Class A : EN61000-3-2
Summary of the content on the page No. 3
CBM-710/720/730/750 User’s Manual IMPORTANT SAFETY INSTRUCTIONS • Read all of these instructions and save them for future reference. • Follow all warnings and instructions marked on the product. • Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. The product may fall, causing serious damage to the product. • Slots and
Summary of the content on the page No. 4
CBM-710/720/730/750 User’s Manual IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operatio
Summary of the content on the page No. 5
CBM-710/720/730/750 User’s Manual CONTENTS 1. INTRODUCTION..................................................................................................................................................1 1. 1 Features .............................................................................................................................................1 1.2 Accessories .........................................................................................................................
Summary of the content on the page No. 6
CBM-710/720/730/750 User’s Manual 9. SERIAL INTERFACE ........................................................................................................................................25 9.1 Specifications..................................................................................................................................25 9.2 Connector Pin Assignment..............................................................................................................26 9.3 Description
Summary of the content on the page No. 7
CBM-710/720/730/750 User’s Manual 1. INTRODUCTION The CBM-710, CBM-720, CBM-730 and CBM-750 are dot impact printers which can be utilized for a wide range of applications, such as data communications terminals, ECR terminals and kitchen printers. High speed performance is made possible by a bidirectional printing system and, since these printers are compact, lightweight and equipped with an abundance of functions, they can be easily employed for a variety of different tasks. The CBM-720 and CBM-
Summary of the content on the page No. 8
CBM-710/720/730/750 User’s Manual 2. TYPE CLASSIFICATIONS Printer types are classified according to the system shown below. 23 O J 100 G B V 28 R F 115 C N – CBM-710 40 X 230 CBM-720 – ››››› › CBM-730 – ››››› › CBM-750 – ››››› › CBM-710 – 23 R J 100 G – B – V Model Validation Function CBM-710 V : With Validation CBM-720 No symbol : Without Validation CBM-730 CBM-750 Memory Back-up B : With Back-up Column capacity N : Without Back-up 23: 23 columns 28: 28 columns Mode 40: 40 columns G : Graphic C
Summary of the content on the page No. 9
CBM-710/720/730/750 User’s Manual 3. SPECIFICATIONS 3.1 General Specifications Item CBM-710, 730 CBM-720, 750 1 Print Method Bidirectional serial dot impact method 2 Character composition 7 · 7 dots (1ncl. half-dots) 23 columns: 230 dot/line 3 Character number per line 28 columns: 280 dot/line 40 columns: 360 dot/line 23 columns: approx.4.0 line/sec. 4 Print speed 28 columns: approx. 3.5 line/sec. 40 columns: approx. 3.0 line/sec. 23 columns: 1.8(W) · 2.4 (H) mm 5 Character size 28 columns: 1.5(
Summary of the content on the page No. 10
CBM-710/720/730/750 User’s Manual Item CBM-710, 730 CBM-720, 750 12 Validation Print Available only for V-Type (1 line print) 3 13 Auto cutter Without cutter With cutter Partial cut/Full cut* 4 14 Cassette ribbon Two color (Black and Red) print IR-61R/B* 15 Paper winder Model AW-2 available as option. 100V – 10%, 50/60 Hz (For Japan) 5 16 Power voltage* 115V – 10%. 60 Hz (For United States) 230V – 10%, 50/60Hz (For Europe) 17 Power consump. Approx. 30W 5° to 35°C / 41° to 95°F 18 Operation temp.
Summary of the content on the page No. 11
CBM-710/720/730/750 User’s Manual 3.2 Print Format (1) Character Font 7 · 7dot. 23 columns: W = Approx. 1.8 mm 40 columns: W = Approx. 1.36 mm 28 columns: W = Approx. 1.5 mm 7· 7 dots (Incl. half-dots) 7· 7 dots (Incl. half-dots) 3.3 Paper Specifications (1) Form Friction specification : Roll paper 76 - 0.5 mm (Width) · 80 mm (Outer dia.) Pin wheel specification: Fan fold paper Width 76 mm (3 inches) ~ 89mm (3.5 inches) (2) Type High quality paper with smooth surface (3) Recommended Paper (Singl
Summary of the content on the page No. 12
CBM-710/720/730/750 User’s Manual 4. BLOCK DIAGRAM 6 CITIZEN
Summary of the content on the page No. 13
CBM-710/720/730/750 User’s Manual 5. EXTERNAL APPEARANCE AND PARS DESCRIPTIONS 5.1 CBM-710 External Appearance Fig. 1 Front View Fig. 2 Rear View 7 CITIZEN
Summary of the content on the page No. 14
CBM-710/720/730/750 User’s Manual 5.2 CBM-720 External Appearance Fig. 3 Front View Fig. 4 Rear View 8 CITIZEN
Summary of the content on the page No. 15
CBM-710/720/730/750 User’s Manual 5.3 CBM-730 External Appearance Fig. 5 Front View Fig. 6 Rear View 9 CITIZEN
Summary of the content on the page No. 16
CBM-710/720/730/750 User’s Manual 5.4 CBM-750 External Appearance Fig. 7 Front View Fig. 9 Rear View 10 CITIZEN
Summary of the content on the page No. 17
CBM-710/720/730/750 User’s Manual 5. 5 Part Descriptions (1) Power Cord Attach the connector end to the printer inlet, and insert the plug end into an electric outlet. (2) Inlet This is the electric power inlet. Attach the connector end of the power cord here. (3 ) Power Switch Power is supplied to the printer by turning this switch on. (4) Line Switch When this switch is pressed, the printer enters select (on line) status. When pressed again, the printer enters deselect (off line) status. This
Summary of the content on the page No. 18
CBM-710/720/730/750 User’s Manual 6. OPERATION 6. 1 Setting and Removing the Paper and Ribbon Covers 1) To open, grasp the sections of the cover with both hands and lift upward. 2) In order to replace the cover, engage the hook section in the middle and press downward in the direction of the arrow. Fig. 9 Fig. 10 3) To open the CBM-750's printer cover, grasp the (lines-engraved) section with both hands and lift upward. 4) For replacing the cover of the CBM-750, set 4 pieces of rear hooks into ea
Summary of the content on the page No. 19
CBM-710/720/730/750 User’s Manual 6.2 Opening and Closing the Cutter Unit (CBM-720. CBM-750) 1) To open the unit, grasp two levers and lift upward. 2) When closing the unit, press downward until it completely locks into place. Fig. 11 13 CITIZEN
Summary of the content on the page No. 20
CBM-710/720/730/750 User’s Manual 6.3 Installing the Cassette Ribbon 1) First remove the ribbon cover (CBM-710, CBM-730). In the case of the CBM-720, 750 remove both the ribbon and paper covers and then open the cutter unit. (Refer to figures 9, 10 &11.) 2) While inserting the ribbon into the space between the print head and the ribbon guide, press the cassette into the holder unit until it clicks into place. (Refer to figure 12 & 13.) 3) Turn the ribbon cassette knob in the direction of the arr
