Tripp Lite SMART2200VS user manual

Summary of the content on the page No. 1

Tripp Lite

1111 West 35th Street
Chicago, IL 60609 USA
Telephone: +(773) 869 1234
E-mail: saleshelp@tripplite.com
Model #: SMART2200VS
SmartPro VS Tower UPS System - Intelligent, line-interactive power management system

Highlights
2200VA / 2.2kVA line interactive tower UPS
Maintains 120V nominal output over an input range of 79 to 147V
Network communications supported via 2 USB ports, 2 serial ports,
SNMP/Web card slot and EPO interface
Current monitoring and switched PDU control via 3 two

Summary of the content on the page No. 2

multiple servers 4 built-in communications ports (2-DB9, 2-USB) for remote monitoring and unattended shutdown Slot for SNMP/web card (part#: SNMPWEBCARD) and environmental sensor (part#: ENVIROSENSE) for remote communications in large IP environments Supports Tripp Lite's WatchDog software application to restore unresponsive programs by automatically restarting them and rebooting completely locked computers by automatically switching UPS power off and back on again Communication ports support o

Summary of the content on the page No. 3

Battery recharge rate 2-4 hours to 90% Replacement RBC54 Battery Cartridge VOLTAGE REGULATION Voltage regulation Automatic Voltage Regulation (AVR) circuits maintain clean, regulated computer-grade 120V nominal output, without description using battery power, during brownouts to 79V and overvoltages to 147V Overvoltage Input voltages between 128 and 147VAC are reduced by 12% correction Direct pass through Input voltages between 105 and 127VAC are passed on to connected equipment unchanged Browno

Summary of the content on the page No. 4

Operating +32 to +104 degrees Fahrenheit / 0 to +40 degrees Celsius Temperature Line mode BTU/hr. 139.5 (Max.) Battery mode 473.0 BTU/hr. (Max.) COMMUNICATIONS Network monitoring Includes 4 built-in monitoring ports, 2-USB & 2-DB9. Each supports on battery, low battery, power restored, AC line port voltage, DC battery voltage, load percentage, battery charge current, battery capacity, internal UPS temperature and line frequency status Software and Includes PowerAlert UPS monitoring software for

Summary of the content on the page No. 5

SNMPWEBCARD For remote monitoring and control via SNMP, Web or telnet. Qty: [optional] Software WATCHDOGSW WatchDog Service Monitoring / Reboot Software Qty: [optional] Surge Protectors DTEL2 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional] DNET1 Network Surge Suppressor - Essential protection for data and communication lines Qty: [optional] DCATV Network Surge Suppressor - Essential protection for TV/VCR coaxial lines Qty: [optional] USB Hubs